麦秸秆加筋盐渍土的尺寸效应与制样问题处置

制备均匀且整体性较好的试样是保证室内实验结果可靠的前提条件。提出了两端压实的静力制样法,围绕制样中出现的几个问题,制定了适宜的应对措施。同时完成了不同直径的盐渍土和麦秸秆加筋土试样的抗压强度实验,分析了试样抗压强度的尺寸效应,以及试样直径与加筋条件间的比例关系。结果显示:采用两端压实的静力制样方法制备加筋土试样是可行的;两种试样均存在明显的尺寸效应;由于麦秸秆的加筋作用,使得麦秸秆加筋土不同尺寸试样的抗压强度尺寸效应大于盐渍土的,且其抗压强度的尺寸效应随试样尺寸的增大而越来越明显;适宜加筋长度为0.316倍试样直径,适宜加筋率0.25%。研究结果可为制备合格的加筋土试样提供参考,也有益于在未来的研究中选择更合理的麦秸秆加筋条件。     

Zn‐MOF‐74 Derived N‐Doped Mesoporous Carbon as pH‐Universal Electrocatalyst for Oxygen Reduction Reaction

It is of increasing importance to explore new low‐cost and high‐activity electrocatalysts for oxygen reduction reaction (ORR), which have had a substantial impact across a diverse range of energy conversion system, including various fuel cell and metal–air batteries. Although engineering carbon nanostructures have been widely explored as a candidate class of Pt‐based ORR electrocatalysts owing to their proved high activity, outstanding stability, and ease of use, there still remains a daunting challenge to develop high activity metal‐free electrocatalysts in pH‐universal electrolyte system. Here, a reliable and controllable route amenable to prepare nitrogen‐doped porous carbon (NPC) with high yields and exceptional quality is described. The as‐prepared NPC shows advantages of high activity, high durability, and methanol‐tolerant as an efficient pH‐universal electrocatalyst for ORR, showing comparable or even better activity as compared with the commercial Pt/C catalysts not only in alkaline media but also in acidic and neutral electrolyte. Systematic electrochemical studies, combining with density functional theory calculation, demonstrate the unique nitrogen‐doping species and favorable pores in the as‐designed NPC synergistically contribute to the significantly improved catalytic activity in pH‐universal medium. The present work potentially presents an important breakthrough in developing ORR electrocatalysts for various fuel cells.     

室温铁磁性Al2O3∶Mn的制备及性质

以Al2O3为衬底利用多能态离子注入法在离子注入设备上制备了一系列具有室温铁磁性的Al2O3:Mn样品.在Al2O3的X射线衍射峰附近发现新的衍射峰,该衍射峰既可能对应一种未知新相,也可能对应Al2O3:Mn固溶体.所有样品都具有磁滞现象和室温铁磁性.     

Fabrication of ZnO nanorod-based hydrogen gas nanosensor

We report a first work on nanofabrication of hydrogen nanosensor from single ZnO branched nanorods (tripod) using in-situ lift-out technique and performed in the chamber of focused ion beam (FIB) system. Self-assembled ZnO branched nanorod has been grown by a cost-effective and fast synthesis route using an aqueous solution method and rapid thermal processing. Their properties were analyzed by X-ray diffraction, scanning electron microscopy, energy dispersion X-ray spectroscopy, transmission electron microscopy, and micro-Raman spectroscopy. These analyses indicate high quality ZnO nanorods. Furthermore, our synthesis technique permits branched nanorods to be easily transferred to other substrates. This flexibility of substrate choice opens the possibility of using FIB system for handling.

The main advantage of the proposed in-situ approach is a controllable lift-out procedure which permitted us to obtain a 90% success rate for building nanodevices. The fabricated nanosensor uses only single self-assembled ZnO branched nanorod (tripod) to gauge the 150 ppm H₂ in the air at room temperature. The hydrogen sensitivity is in the range of 0.6–2% depending on which two branches to use. The nanosensor has selectivity against other gases such as O₂, CH₄, CO and LPG, which shows sensitivity of <0.02%. The single ZnO branched nanorod sensor can operate at low power of <5 μW.     

ATN路由器中路由算法IS-IS的研究与改进

路由算法和协议在路由器中的地位至关重要,文章对路由算法IS-IS及路由算法的效率进行研究和改进,提高了路由器的处理能力和稳定性。     

基于协方差分析描述函数技术的弹道导弹落点预报

针对采用Monte-Carlo方法对非线性系统进行统计分析效率低下的问题,将协方差分析描述函数法(CADET)应用于弹道导弹落点预报与精度分析.介绍CADET方法的统计线性化思想,提出一种针对一阶可微随机变量函数的统计线性化方法,建立弹道导弹被动段的均值和方差计算的CADET模型.该方法通过一次计算就可得到随机变量数字...     

脉冲氙灯瞬态放电特性实时检测

随着惯性约束核聚变（ICF）的发展,对激光驱动器提出了很高的要求。本文研究了脉冲氙灯瞬态在线检测系统对脉冲氙灯放电电压、电流和发光强度进行实时监测的方法和系统的结构,结合氙灯的瞬态放电特征,利用光电隔离、光纤传输、高速A／D采样等技术,获取氙灯瞬态放电 数据。有效的实现了弱电系统对强电系统的远程测控,为大型激光驱动器能源系统的自动测控打下良好的基础。     

一种基于最优控制的网络管理整体策略

随着当前运营商所运营接入网络制式的不断发展,网络管理的负担大大增加,网络管理变得更加频繁。在这种情况下,网络管理不能只保证网络系统处于良好状态,需要同时保证网络状态调整的过程最优。从控制论的角度研究了这一问题,基于最优控制理论提出了最优化网络管理方法。本文的研究成果已经在天津联通的接入网络中得到了证实,相关研究对自动控制理论与网络管理的相关研究有着十分重要的意义。     

CTM和个人通信业务

本文介绍了ＥＴＳＩ最近提出的ＣＴＭ的概念;即基于ＤＥＣＴ技术在ＰＳＴＮ,ＩＳＤＮ的基础上结合ＩＮ技术实现个人通信业务,并给出了ＣＴＭ的网络结构,分析了ＣＴＭ个人通信业务的市场形势,最后介绍了ＣＴＭ在欧洲的发展及应用现状。     

基于光谱控制与色散优化的飞秒啁啾脉冲放大系统

飞秒激光在工业加工、精密测量、军事国防、科学研究等领域具有广阔的应用前景。报道了基于光谱控制与色散优化的高功率、高脉冲质量飞秒啁啾脉冲放大系统。利用与压缩器色散量相匹配的色散可调啁啾布拉格光纤光栅(CFBG)作为展宽器,通过微调CFBG色散量补偿系统的残余色散使整个系统的净色散趋于零;同时引入光谱滤波等手段,保证入射到主放大器之前的脉冲光谱形状不发生畸变,避免了放大过程中脉冲质量的劣化。最终获得了重复频率为50 MHz、平均功率为24 W、脉冲宽度为198 fs的高脉冲质量飞秒激光输出。