Simple synthesis of a porous Sb/Sb2O3 nanocomposite for a high-capacity anode material in Na-ion batteries

High-capacity anode materials are highly desirable for sodium ion batteries.Here,a porous Sb/Sb2O3 nanocomposite is successfully synthesized by the mild oxidization of Sb nanocrystals in air.In the composite,Sb contributes good conductivity and Sb2O3 improves cycling stability,particularly within the voltage window of 0.02-1.5 V.It remains at a reversible capacity of 540 mAh·g-1 after 180 cycles at 0.66 A·g-L Even at 10 A·g-1,the reversible capacity is still preserved at 412 mAh.g-1,equivalent to 71.6％ of that at 0.066 A.g-1.These results are much better than Sb nanocrystals with a similar size and structure.Expanding the voltage window to 0.02-2.5 V includes the conversion reaction between Sb2O3 and Sb into the discharge/charge profiles.This would induce a large volume change and high structure strain/stress,deteriorating the cycling stability.The identification of a proper voltage window for Sb/Sb2O3 paves the way for its development in sodium ion batteries.     

Synthesis of size-controlled CoMn2O4 quantum dots supported on carbon nanotubes for electrocatalytic oxygen reduction/evolution

A combined hot-injection and heat-up method was developed to synthesize monodisperse and uniform CoMn2O4 quantum dots (CMO QDs).CMO QDs with average size of 2.0,3.9,and 5.4 nm were selectively obtained at 80,90,and 105 ℃,respectively.The CMO QDs supported on carbon nanotubes (CNTs) were employed as catalysts for the oxygen reduction/evolution reaction (ORR/OER) in alkaline solution to investigate their size-performance relationship.The results revealed that the amount of surface-adsorbed oxygen and the band gap energy,which affect the charge transfer in the oxygen electrocatalysis processes,strongly depend on the size of the CMO QDs.The CMO-3.9/CNT hybrid,consisting of CNT-supported CMO QDs of 3.9 nm size,possesses a moderate amount of surfaceadsorbed oxygen,a lower band gap energy,and a larger charge carrier concentration,and exhibits the highest electrocatalytic activity among the hybrid materials investigated.Moreover,the CMO-3.9/CNT hybrid displays ORR and OER performances similar to those of the benchmark Pt/C and RuO2 catalysts,respectively,due to the strong carbon-oxide interactions and the high dispersion of CoMn2O4 QDs on the carbon substrate;this reveals the huge potential of the CMO-3.9/CNT hybrid as a bifunctional OER/ORR electrocatalyst.The present results highlight the importance of controlling the size of metal oxide nanodots in the design of active oxygen electrocatalysts based on spinel-type,nonprecious metal oxides.     

Photocatalytic mechanism of high-activity anatase TiO<Subscript>2</Subscript> with exposed (001) facets from molecular-atomic scale: HRTEM and Raman studies

Anatase TiO₂ with a variant percentage of exposed (001) facets was prepared under hydrothermal processes by adjusting the volume of HF, and the photocatalytic mechanism was studied from atomic-molecular scale by HRTEM and Raman spectroscopy. It was revealed that: 1) From HRTEM observations, the surface of original TiO₂ with exposed (001) facets was clean without impurity, and the crystal lattice was clear and completed; however, when mixed with methylene blue (MB) solution, there were many 1 nm molecular absorbed at the surface of TiO₂; after the photocatalytic experiment, MB molecules disappeared and the TiO₂ lattice image became fuzzy. 2) The broken path of the MB chemical bond was obtained by Raman spectroscopy, i.e., after the irradiation of the light, the vibrational mode of C-N-C disappeared due to the chemical bond breakage, and the groups containing C-N bond and carbon rings were gradually decomposed. Accordingly, we propose that the driving force for breaking the chemical bond and the disappearance of groups is from the surface lattice distortion of TiO₂ during photocatalyzation.     

Integration of geometric variation and part deformation into variation propagation of 3-D assemblies

This paper introduces a novel modelling method for variation propagation calculation of 3-D assemblies taking into account geometric variation and part deformation, which are neglected in most models in tolerance analysis. Initially, numerical studies are carried out in order to illustrate the characteristics of strain distribution in components and contact forces on the mating surfaces of a 3-D assembly. According to these characteristics, a linear equivalent model using springs to represent the elastic mating surfaces with geometric variation was presented. Then, the equilibrium criterions corresponding to actual contact situations and iterative searching algorithm of the equilibrium status of contacting were developed. The proposed modelling and calculation method were finally applied to the assembly of two machined parts, on which finite-element analyses and experimental tests were conducted to validate the effectiveness and accuracy. This linear contact model also shows an important advantage on modelling and calculating efficiency, which enable the practical application to variation propagation calculation in both tolerance design and assembly process.     

A portable multifunctional power box

In this study, we used a microcontroller to provide and control power to multiple sources using the highly efficient energy storage provided by the direct current (DC) bus of a lithium iron phosphate (LiFePO₄) battery. Through multiple loops, high-efficiency buck and boost conversion, and DC-to-alternating current (AC) conversion, the power box can quickly and simultaneously provide three sets of voltage outputs, 5-V DC, 19–22-V DC, and 110-V AC, to different electronic devices. Multiple sets of conversion output voltages were achieved using multiple sets of conversion circuits, in parallel to the DC bus. Compared with a single conversion output voltage, the multiple sets of conversion output voltages from the energy storage battery had a higher practicability. For a single output voltage, the battery provided a suitable voltage to different electric devices via a substage converter, thus lowering the overall conversion efficiency. For practical applications such as camping, blackouts, long journeys, emergencies, and rescues, the multiple sets of converted voltage outputs offer substantial functional convenience. For safety control, we used a single-chip controller to quickly detect various overcurrent situations.