Dispersion polymerization of aniline using hydroxypropylcellulose as stabilizer: role of rate of polymerization

Hydroxypropylcellulose (HPC) has been used as a steric stabilizer for preparing polyaniline dispersions using the route of oxidative dispersion polymerization of aniline. Using strongly acidic conditions (1 mol l^?1 HCl), low temperature of about 2 °C and a concentration of aniline as low as 0.5%, ammonium peroxodisulfate at 1.25% and hydroxypropylcellulose concentrations at 0.5–1 g d l^?1, unstable dispersions were obtained not only in water but also in aqueous alcohols (ethanol and methanol) up to at least 70 vol% alcohol. In contrast, dispersions that remained stable for at least 72 h were obtained when the alcohol concentration of the medium was as high as about 80 vol%. Kinetic studies of the polymerization systems suggested that success in the latter case was due to a lowering of the rate of polymerization. Transmission electron microscopy studies showed that dispersion particles prepared in 80 vol% alcohol media are spherical in shape and their diameter decreases with increasing stabilizer concentration. However, a change of morphology from spherical to aggregated needle‐shaped was observed when the rate was increased by increasing the aniline concentration from 0.5% to 0.75% g d l^?1 in the above recipe. The aggregated particles were found to be broken down to spherical nanoparticles when the as‐prepared dispersions were sonicated for about 30 min. The sonicated dispersion on drying showed the presence of fractal clusters of polyaniline particles in the dried film. The fractal dimension was determined to be 1.77 which agreed well with the theoretical value determined by computer simulation based on a diffusion limited cluster–cluster aggregation model in three dimensions. © 2001 Society of Chemical Industry     

Influence of martensite morphology on the work-hardening behavior of high strength ferrite–martensite dual-phase steel

This study concerns influence of martensite morphology on the work-hardening behavior of high-strength ferrite–martensite dual-phase (DP) steel. A low-carbon microalloyed steel was subjected to intermediate quenching (IQ), step quenching (SQ), and intercritical annealing (IA) to develop different martensite morphologies, i.e., fine and fibrous, blocky and banded, and island types, respectively. Analyses of work-hardening behavior of the DP microstructures by differential Crussard–Jaoul technique have demonstrated three stages of work-hardening for IQ and IA samples, whereas the SQ sample revealed only two stages. Similar analyses by modified Crussard–Jaoul technique showed only two stages of work-hardening for all the samples. Among different treatments, IQ route has yielded the best combination of strength and ductility due to its superior work-hardening behavior. The influence of martensite morphology on nucleation and growth of microvoids/microcracks has been correlated with the observed tensile ductility.     

Physical and Mathematical Modeling of Inert Gas-Shrouded Ladle Nozzles and Their Role on Slag Behavior and Fluid Flow Patterns in a Delta-Shaped, Four-Strand Tundish

Inert gas shrouding practices were simulated using a full-scale, four-strand water model of a 12-tone, delta-shaped tundish. Compressed air was aspirated into the ladle shroud to model volumetric flow rates that range between 2 and 10 pct of steel entry flows. Bubble trajectories, slag layer movements, and flow fields, were visualized. Flow fields were visualized using particle image velocimetry (PIV). A numerical model also was developed using discrete phase modeling (DPM) along with the standard k-ε turbulence model with two-way turbulence coupling. Predicted flow fields and bubble trajectories corresponded with the water model experiments.     

Exploring the simultaneous effect of nano‐silica reinforcement and electron‐beam irradiation on a model LDPE/EVA‐based TPE system

BACKGROUND: The technical properties of polyolefinic thermoplastic elastomer (TPE) systems can be modified significantly using fillers like nano‐silica. Controlled irradiation can potentially be an effective way of tailoring the technical properties of such nano‐silica‐filled TPE systems. RESULTS: The effect of controlled electron‐beam irradiation on the properties of a pristine silica nanoparticle‐filled model low‐density polyethylene/ethylene–(vinyl acetate) (LDPE/EVA) TPE system is explored in this paper. The morphology of such a filled system was investigated using scanning electron microscopy (SEM) and field‐emission SEM. The dispersion of silica particles was analysed using transmission electron microscopy which clearly indicates that at low loading a fine dispersion of silica occurs in the polymer matrix. Swelling studies and Fourier transform infrared analyses indicate the occurrence of a favourable EVA–silica interaction. On the whole, it is observed that electron‐beam irradiation induces a high degree of reinforcement in all the silica‐filled samples through interfacial crosslinking as well as controlled crosslinking in the two polymer phases. In a few samples the processing characteristics are remarkably preserved following concurrent nano‐silica reinforcement and irradiation, while the technical properties of TPE systems, including set, solvent swelling and mechanical properties, are improved. However, the improvement in properties is a strong function of sequence of addition of filler in the LDPE/EVA blends. CONCLUSION: The green technique studied can be potentially extended for the improvement of the technical properties of conventional TPE systems. Copyright © 2009 Society of Chemical Industry     

Enhancing effective depth-of-field by image fusion using mathematical morphology

Reduced depth-of-field (DOF) poses a problem in the light optical imaging system, since the objects present outside this zone appear blurry in the recorded image. The effective DOF of the sensor may be enhanced considerably without compromising the quality of the image by fusing images captured with different focused regions. This paper presents an image fusion technique suitable for combining multifocus images of a scene. The method employs morphological filters to select sharply focused regions from various images and then combines them together to reconstruct the image in which all the regions are properly focused. A performance measure based on image gradients is used to compare the results obtained by the proposed method with those obtained by other image fusion techniques.     

Decision on economical rail grinding interval for controlling rolling contact fatigue

Rail players around the world have been increasing axle loads to improve the productivity of freight and heavy haul operations. This has increased the risk of surface cracks at curves because of rolling contact fatigue. Rail grinding has been considered an effective process for controlling these cracks and reducing risks of rail breaks. The complexity of deciding the optimal rail grinding intervals for improving the reliability and safety of rails is because of insufficient understanding of the various factors involved in the crack initiation and propagation process. This paper focuses on identifying the factors influencing rail degradation, developing models for rail failures and analyzing the costs of various grinding intervals for economic decision making. Various costs involved in rail maintenance, such as rail grinding, downtime, inspection, rail failures and derailment, and replacement of worn‐out rails, are incorporated into the total cost model developed in this paper. Field data from the rail industry have been used for illustration.     

Thermoelectric Power Studies on YBa2?xCaxCu3O7?δ System

The temperature dependence of the thermoelectric power of calcium substituted YBa_2–x Ca _x Cu₃O_7– pellets with 0x1.5 is presented between 60 K and 300 K. A metal–insulator transition was reported earlier by us in this system and was attributed to the ionic size-dependent localization effect. While the sign of thermoelectric power of all the calcium substituted samples was found to be positive, its magnitude increases significantly with calcium content in YBCO. The normal state thermoelectric power data of substituted YBa_2–x Ca _x Cu₃O_7– (0x1.5) are discussed in light of a two-band model originally proposed by Gottwick et al. for heavy fermion systems and later modified by Forro et al.     

Relative merits of ultrasonography, computed tomography and cholangiography in patients of surgical obstructive jaundice

Fifty consecutive patients with surgical obstructive jaundice were evaluated prospectively with ultrasonography (US), computed tomographic scans (CT scan) and cholangiography-percutaneous transhepatic cholangiography (PTC) or endoscopic retrograde cholangio-pancreaticography (ERCP). The diagnostic accuracy of ultrasound in defining the level of obstruction was 86% as compared to 86% and 94.8% for CT scan and cholangiography, respectively. To measure the etiology of the obstruction, the accuracy of ultrasound, CT scan and cholangiography were 84%, 86% and 75%, respectively. The sensitivity of CT scans and cholangiography in the diagnosis of choledocholithiasis was 100%, 81.8% and 90%, respectively, whereas specificity was 97%, 100% and 100%, respectively. Sensitivity for a diagnosis of malignant disease was 100% for both US and CT scans whereas specificity was 90% and 81%, respectively. Ultrasonography as a single radiological investigation is sufficient in the evaluation of the majority of patients with surgical obstructive jaundice. CT scan and cholangiography should be done only when US gives equivocal findings or if concomitant therapeutic procedures like basketing and stenting are also planned.     

Metal ion and guanine nucleotide modulations of agonist interaction in G-protein-coupled serotonin1A receptors from bovine hippocampus

1. The serotonin type 1A (5-HT1A) receptors are members of a superfamily of seven transmembrane domain receptors that couple to GTP-binding regulatory proteins (G-proteins). We have studied the modulation of agonist binding to 5-HT1A receptors from bovine hippocampus by metal ions and guanine nucleotide. 2. Bovine hippocampal membranes containing the 5-HT1A receptor were isolated. These membranes exhibited high-affinity binding sites for the specific agonist [3H]OH-DPAT. 3. The agonist binding is inhibited by monovalent cations Na+, K+, and Li+ in a concentration-dependent manner. Divalent cations such as Ca2+, Mg2+, and Mn2+, on the other hand, show more complex behavior and induce enhancement of agonist binding up to a certain concentration. The effect of the metal ions on agonist binding is strongly modulated in the presence of GTP-gamma-S, a nonhydrolyzable analogue of GTP, indicating that these receptors are coupled to G-proteins. 4. To gain further insight into the mechanisms of agonist binding to bovine hippocampal 5-HT1A receptors under these conditions, the binding affinities and binding sites have been analyzed by Scatchard analysis of saturation binding data. Our results are relevant to ongoing analyses of the overall regulation of receptor activity for G-protein-coupled seven transmembrane domain receptors.     

Effect of inversion on barrier height in a metal-SiO2-Si tunnel system

The effect of strong inversion in a metal-SiO₂-p-Si system has been studied. It is seen that the plot of barrier height versus metal work function of the system becomes nonlinear when the metal work function is lowered below a critical value. These values of critical work function are calculated and analysed for different values of doping and oxide charge.