Effect of [6,6]‐phenyl‐C61‐butyric acid methyl ester on the morphology of poly(3‐hexylthiophene) film

The change of morphology of poly(3‐hexylthiophene) (P3HT) film as a result of blending with [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PCBM) was studied using a freeze‐dry method. A porous structure was observed as the P3HT/PCBM solution was freeze‐dried. The pore size decreased as the proportion of PCBM increased in the P3HT/PCBM blended film. Additionally, the freeze‐dried P3HT/PCBM film was more resistant to the formation of PCBM crystals than that prepared by a spin‐coating method during the thermal annealing process. Homogeneous distribution of PCBM in the freeze‐dried P3HT/PCBM film was the main reason for the reduction of large PCBM crystal formation. Copyright © 2011 Society of Chemical Industry     

Functional acrylic acid as stabilizer for synthesis of smart hydrogel particles containing a magnetic Fe3O4 core

This paper reports a novel method to synthesize magnetic, stimuli-sensitive latex nanoparticles made with magnetite/poly(N-isopropylacrylamide-co-acrylic acid) (Fe₃O₄/P(NIPAAm-co-AAc)). To form a stabilized suspended core, iron oxide (Fe₃O₄) was functionalized with AAc such that further polymerization with NIPAAm and AAc monomers could occur. The P(NIPAAm-co-AAc) shell layer exhibited thermosensitive properties. The inclusion of Fe₃O₄ into the latex nanoparticles was confirmed using transmission electron microscopy, X-ray photoelectron spectroscopy, X-ray diffraction spectroscopy, thermogravimetric analyzer (TGA), and superconducting quantum interference device magnetometer. The NIP–(AAc2.6–Fe) latex nanoparticles contained 2.25% Fe₃O₄ (by weight), as determined by TGA analysis. The particle diameters measured approximately 160–240 nm with a lower critical solution temperature of 35 °C. These novel magnetic stimuli-responsive latex nanoparticles have potential applications in numerous fields, such as catalyst supports, protein immobilization, cancer therapy, target drug delivery systems, and other biomedical applications.     

Free-standing single-walled carbon nanotube/SnO2 anode paper for flexible lithium-ion batteries

Free-standing single-walled carbon nanotube/SnO₂ (SWCNT/SnO₂) anode paper was prepared by vacuum filtration of SWCNT/SnO₂ hybrid material which was synthesized by the polyol method. From field emission scanning electron microscopy and transmission electron microscopy, the CNTs form a three-dimensional nanoporous network, in which ultra-fine SnO₂ nanoparticles, which had crystallite sizes of less than 5 nm, were distributed, predominately as groups of nanoparticles on the surfaces of single walled CNT bundles. Electrochemical measurements demonstrated that the anode paper with 34 wt.% SnO₂ had excellent cyclic retention, with the high specific capacity of 454 mAh g^?1 beyond 100 cycles at a current density of 25 mA g^?1, much higher than that of the corresponding pristine CNT paper. The SWCNTs could act as a flexible mechanical support for strain release, offering an efficient electrically conducting channel, while the nanosized SnO₂ provides the high capacity. The SWCNT/SnO₂ flexible electrodes can be bent to extremely small radii of curvature and still function well, despite a marginal decrease in the conductivity of the cell. The electrochemical response is maintained in the initial and further cycling process. Such capabilities demonstrate that this model hold great promise for applications requiring flexible and bendable Li-ion batteries.     

Microwave sintering and grain growth behavior of nano-grained BaTiO3 materials

In this paper, we investigated the effect of microwave sintering parameters on the development of the microstructure of nano-grained BaTiO₃ materials co-doped with Y and Mg species. It is observed that the materials can not only be sintered densely at a lower temperature (1150 °C) and a shorter soaking time (20 min), but also the grain growth can be suppressed by 2.45 GHz microwave heating process. However, the grain growth exhibits a unique tendency in some processing conditions such as microwave sintering for longer intervals (≧60 min) or at higher temperatures (1200 °C). The grain growth behavior after densification was investigated in terms of the phenomenological kinetics, and the activation energy for grain growth using microwave sintering (59.4 kJ/mol) is considerably less than that of the conventionally sintered ones (96.0 kJ/mol), which indicates that microwave sintering process can accelerate the densification rate of the BaTiO₃ materials comparing with the conventional sintering process.     

Effect of coupling agent content on properties of composites made from polylactic acid and chrysanthemum waste

Chrysanthemum flower is among one of the highly sought after and widely planted flower crops, in particular for cultural and religious ceremonies. However, the chrysanthemum stem and stalk have little value and usually discard as by‐product waste from floristry. The objective of this research is to investigate the potential value of utilizing chrysanthemum stem and stalk as reinforcing fillers for thermoplastic composites. In this study, 2‐mm thick composite sheet containing predefined formulations of polylactic acid (PLA), chrysanthemum waste filler (CWF) ranging from 15 to 60 phr, and maleated polyethylene (MAPE) coupling agent up to 5 phr were prepared with the aid of Haake internal mixer and compression molding. The effect of MAPE loading on tensile, thermal, and morphological properties of PLA/CWF composites was investigated. The findings revealed that PLA/CWF composite attained improved tensile modulus compared to the neat PLA, and the tensile modulus increases with higher concentration of CWF. However, both tensile strength and elongation at break reduces with increase loading of CWF. Overall, PLA/CWF composites with MAPE shows better performance compared to those without MAPE, where an optimum strength of 21.8 MPa can be achieved with 60 phr CW and 3 phr MAPE. The measured tensile strength is comparable to alternatives natural fiber thermoplastic composites demonstrating its potential to be used in non‐structurally demanding application. J. VINYL ADDIT. TECHNOL., 26:10–16, 2020. © 2019 Society of Plastics Engineers     

Protective Effect of Caffeic Acid on Paclitaxel Induced Anti-Proliferation and Apoptosis of Lung Cancer Cells Involves NF-κB Pathway

Caffeic acid (CA), a natural phenolic compound, is abundant in medicinal plants. CA possesses multiple biological effects such as anti-bacterial and anti-cancer growth. CA was also reported to induce fore stomach and kidney tumors in a mouse model. Here we used two human lung cancer cell lines, A549 and H1299, to clarify the role of CA in cancer cell proliferation. The growth assay showed that CA moderately promoted the proliferation of the lung cancer cells. Furthermore, pre-treatment of CA rescues the proliferation inhibition induced by a sub-IC(50) dose of paclitaxel (PTX), an anticancer drug. Western blot showed that CA up-regulated the pro-survival proteins survivin and Bcl-2, the down-stream targets of NF-κB. This is consistent with the observation that CA induced nuclear translocation of NF-κB p65. Our study suggested that the pro-survival effect of CA on PTX-treated lung cancer cells is mediated through a NF-κB signaling pathway. This may provide mechanistic insights into the chemoresistance of cancer calls.     

A facile pathway to prepare molybdenum boride powder from molybdenum and boron carbide

Molybdenum boride is an ideal hard and wear-resistant material. In this study, a new method is proposed for preparing molybdenum boride, by which Mo first reacts with B₄C to generate the mixture of molybdenum boride and C, and then the product is decarburized by molten Ca to generate CaC₂. Pure molybdenum boride could be obtained after acid leaching to remove the by-product CaC₂. According to the experimental and thermodynamic calculation results, it is concluded that the single-phase MoB could be successfully prepared, while Mo₂B, Mo₂B₅, and MoB₄ could not be synthesized by this method. Moreover, it was found that the particle size of finally prepared MoB is determined by particle size of raw Mo powder. The residual carbon content of the product could be decreased to 0.10 wt% after first reaction at 1673 K for 6 hours and then decarburization reaction at 1673 K for 6 hours.     

Effects of the organometallic coupling agents on adhesion of the carbon fiber–BMI composites

In order to increase the chemical bonding force between fiber and resin, several kinds of organometallic coupling agent (such as titanate, zirconate, and zircoaluminate) were chosen and added in the BMI resin formulation, which possess the same solvent system with those coupling agents. The DSC analysis technique was used to find the best curing condition, and TGA was used to investigate the thermal stability property of the best curing condition. For the purpose of analyzing the bonding structure, ESCA surface element analysis techniques was applied in this study. Beside that, the mechanical properties of tensile, flexural, and short-beam shear strengths were measured for the effect of adding coupling agents, and the SEM of fracture surfaces were taken to study the fractural analysis. The results showed that composites with the application of organometallic coupling agents of [RO–Ti(OX–R′NH₂)₃] structure in the treatment of BMI resin were highly thermal stable. Also, it was shown that the mechanical strengths of composites fabricated by pretreatment of the carbon fibers with coupling agents were higher than those fabricated by adding coupling agents in resins, but there was no obvious improvement of mechanical properties with higher concentration of coupling agents. However, the SEM showed that the adhesion between fiber and resin can actually be improved by adding proper amount of coupling agents in the BMI resin formulation.     

Paired electrooxidation IV. Decarboxylation of sodium gluconate to D-arabinose

A paired electrooxidative method has been developed to synthesize D-arabinose in a divided cell. D-arabinose is a material which has an important role in the production of vitamin B2 and DNA. Sodium gluconate was directly oxidized at the anode and indirectly oxidized in the catholyte by bubbling oxygen which was reduced to H₂O₂ and OH free radicals. In the catholyte, indirect oxidation of sodium gluconate was mediated by Fe³⁺ and OH free radicals. The optimal current efficiencies for D-arabinose production in the anolyte and catholyte were found to be 88.37% and 39.12%, respectively, and the total current efficiency of the paired electrooxidation was 127.49%. The paired electrosynthesis of D-arabinose is more economical in terms of power consumption than electrosynthesis that employ a single anode or cathode as the working electrode. The influence of cathodic/anodic CV and I/E curves, redox mediators and the amount of charge passed were also examined.     

Gas-Phase Catalysis by Micelle Derived Au Nanoparticles on Oxide Supports

The reactivity of gold clusters (8–22 nm diameter) supported on different metal oxides (titanium dioxide (TiO₂), zinc oxide (ZnO), zirconium oxide (ZrO₂), and silicon dioxide (SiO₂)) was investigated in a continuous flow reactor. Clusters were encapsulated within polymer in toluene solution, impregnated onto the bulk supports, and reduced by calcination at 300 °C. Support dependent sintering (TiO₂>ZrO₂>ZnO) was observed following heating in air at 300 °C. For both CO oxidation and propylene hydrogenation, Au nanoclusters on TiO₂ exhibit the highest activity compared to other supports.