In this paper, we develop a framework of Question Answering Pages (referred to as QA pages) recommendation. Our proposed framework consists of the two modules: the off-line module to determine the importance of QA pages and the on-line module for on-line QA page recommendation. In the off-line module, we claim that the importance of QA pages could be discovered from user click streams. If the QA pages are of higher importance, many users will click and spend their time on these QA pages. Moreover, the relevant relationships among QA pages are captured by the browsing behavior on these QA pages. As such, we exploit user click streams to model the browsing behavior among QA pages as QA browsing graph structures. The importance of QA pages is derived from our proposed QA browsing graph structures. However, we observe that the QA browsing graph is sparse and that most of the QA pages do not link to other QA pages. This is referred to as a sparsity problem. To overcome this problem, we utilize the latent browsing relations among QA pages to build a QA Latent Browsing Graph. In light of QA latent browsing graph, the importance score of QA pages (referred to as Latent Browsing Rank) and the relevance score of QA pages (referred to as Latent Browsing Recommendation Rank) are proposed. These scores demonstrate the use of a QA latent browsing graph not only to determine the importance of QA pages but also to recommend QA pages. We conducted extensive empirical experiments on Yahoo! Asia Knowledge Plus to evaluate our proposed framework. 相似文献
In this paper, we propose an architecture with two different kinds of neural networks for on-line determination of optimal cutting conditions. A back-propagation network with three inputs and four outputs is used to model the cutting process. A second network, which parallelizes the augmented Lagrange multiplier algorithm, determines the corresponding optimal cutting parameters by maximizing the material removal rate according to appropriate operating constraints. Due to its parallelism, this architecture can greatly reduce processing time and make real-time control possible. Numerical simulations and a series of experiments are conducted on end milling to confirm the feasibility of this architecture. 相似文献
In the study of mass transfer between partially miscible liquids, temperature perturbations have been found to have an important effect in the generation of interfacial activity. Micro- and macro-generated interfacial convection usually occurs in combination with one another even in fairly simple heat or mass transfer events. These combinations are responsible for the enhancement of mass transfer rates. In an effort to acquire a better understanding of the heat transfer effects in ternary liquid-liquid systems, temperature difference profiles were measured when contacting two partially miscible phases. A vertical and a rotational transfer cell were designed to contact the partially miscible phases without inducing external disturbances. Five thermocouples were immersed in the bottom liquid phase at predetermined positions below the interface. In order to understand the influence of the convection generated, the vertical cell was designed to hinder convection in one phase, while the rotational cell permits convection in both phases. The experimental results showed larger temperature differences in the rotational cell after the contact of the phases. Also, systems which were initially unsaturated presented larger heat effects than those in which the partially miscible solvents were initially saturated. Several parameters indicating the importance of heat effects in the ternary systems studied are reported. 相似文献
Activity recognition (AR) is a key enabler for a context‐aware smart home since knowing what the residents’ current activities helps a smart home provide more desirable services. This is why AR is often used in assistive technologies for cognitively impaired people to evaluate their abilities to undertake activities of daily living. In a real‐life scenario, multiple‐resident AR has been considered as a very challenging problem, primarily due to the complexity of data association. In addition, most prior research has not considered the potential interpersonal interactions among residents to simplify complexity, especially in an environment monitored by ambient sensors. In this study, we propose two types of multiuser activity models, both of which are derived from an interaction‐feature enhanced multiuser model learning framework. These two models consider interpersonal interactions and data association for multiuser AR using ambient sensors. We then compare their performance with the other two baseline models with or without consideration of data association and interpersonal interactions. The experimental results show that the derived models outperform other baseline classifiers. Therefore, the proposed approach can increase the opportunities for providing context‐aware services for a multiresident smart home. 相似文献
A new type of mesoporous silica has been prepared which showed 780 m2/g of BET surface area and 0.6 ml/g of primary mesopores narrowly distributed around 4.2 nm. More importantly however, is that it showed short-range zeolite crystallinity as demonstrated by FTIR and XRD analysis, and hydrophobicity as demonstrated by water and n-hexane adsorption.
This material was synthesized via a dual-template, three-step hydrothermal–flocculation–steaming synthesis procedure developed by us recently. Briefly, MFI nanoprecursors (NPs) were first prepared by a low-temperature hydrothermal step using TPAOH as template for zeolite structure, and then flocculated using a surfactant that served as the template for the mesopores. The collected NPs are mesoporous silica exhibiting short-range MFI domains when directly calcined. However, the steaming step promoted the crystallization of the NPs and created uniform mesopores. It was found that almost every detail in these procedures affected the properties of the final product. The most important variables, however, were identified as the duration the flocculants were kept in contact with the liquid phase, and the humidity under which the steaming was conducted. By properly adjusting the procedures, the said mesoporous silica, as well as nanocrystals having high external surface area, could be produced at will. 相似文献
The effects of platinum (Pt) and silver (Ag) metallisation in the photocatalytic oxidation of resorcinol at pH 3 ± 0.5 have been investigated. The photocatalytic degradation of resorcinol was significantly improved by Pt/TiO2, while the presence of Ag/TiO2 enhanced the initial photocatalytic degradation rate of resorcinol slightly. Likewise, the photocatalytic mineralisation of resorcinol continued to be enhanced by Pt/TiO2, but it was retarded when Ag/TiO2 was used.
The function of Pt and Ag deposits on the surface of TiO2 has been found to be markedly influenced by the interaction of resorcinol and its degradation products with the metal deposits. The presence of Pt or Ag on the surface of TiO2 altered the distribution of degradation products of resorcinol as well as the production of photoactive species for the photocatalytic oxidation of resorcinol. The X-ray photoelectron spectroscopy (XPS), zeta potential and transmission electron microscopy (TEM) analyses have indicated that the contrasting effect of Pt and Ag deposits were governed by the oxidation states and the catalytic property of metal deposits. In addition to that, it has been found that the roles of metal deposits are specific and should not be generalised. 相似文献
To help make a good polymer blend by melt blending, the properties of polycarbonate (PC)/acrylonitrile-butadiene-styrene (ABS) systems with various compositions have been investigated. As ABS is blended into PC to form a binary system, Brabender torque is reduced, a phenomenon that results in Improved processability of PC. With increasing ABS content, the mechanical properties of the blends such as tensile strength, modulus, hardness, and shrinkage decrease. However, with the variation of composition, Izod impact strength shows a maximum, while elongation at break exhibits a minimum. These phenomena are discussed with dynamic viscoelasticities and scanning electron microscopic morphological results. The value of ΔTg(TgβPC ? TgβABS) is at its smallest when the ratio of PC to ABS is 90:10, However, the value rises with an increase in ABS because the butadiene content of the ABS hinders compatibility in the binary system. At the 90:10 composition, the damping height is optimal. In addition, the dispersed phase of the ABS is most ideal, absorbing the impact force and showing high impact strength. Composition ratios other than 90:10 present high damping as well as undesirable phase separation because of poor adhesion between two phases. As a result, the mechanical properties are reduced. 相似文献
Nano-titania (TiO2) incorporated into polyimide (PI) matrix can significantly enhance the adhesion strength for PI/TiO2 hybrid film and copper system. Surface modifications by various plasma treatments (Ar, Ar/N2 and Ar/O2) were also applied in this study to improve the adhesion strength. The Ar/N2 plasma treatment is regarded as the more effective way in promoting the adhesion strength. The maximum adhesion value of 9.53 N/cm was obtained for the PI/TiO2-1 wt% hybrid film with Ar/N2 plasma treatment. It is enhanced about 10 times as large as pristine PI. Furthermore, by Ar/O2 plasma treatment, a weak boundary of copper oxide was formed at the interlayer between PI/TiO2 hybrid film and copper which decreases the adhesion strength. The effects of plasma treatment and content of nanosized TiO2 on the adhesion strength between PI/TiO2 hybrid film and copper system were studied. Atomic force microscope and contact angle analyses were used to measure the changes in surface morphology and surface energy as a result of plasma treatment. Besides, the interfacial states of peeled-off polymer side and copper side were investigated by X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). Based on the result of XPS spectra, the peeled-off failure mode between PI/TiO2 hybrid film and copper was proposed in this study. 相似文献