A novel SAL-PINSCH quantum-well laser structure for a pinched beamdivergence

Summary form only given. An edge-emitting strained AlGaAs/InGaAs/GaAs quantum-well laser structure is reported. It has a periodic index separate confinement heterostructure (PINSCH) optical confinement layers for a small beam divergence and high output power. Preliminary measurements of AR/HR-coated self-aligned ridge waveguide lasers show a CW output power of up to 350 mW and a 20° transverse beam divergence at a 980-nm lasing wavelength. This low beam divergence results in a high coupling efficiency of 51% into single-mode fibers. The expanded optical field in PINSCH confinement layers significantly pinches the transverse beam divergence and increases the maximum output power     

Experimental investigation of natural convection from a horizontal ice surface melting in pure water

A study on natural convection from a horizontal ice surface melting in pure water was conducted experimentally for the ambient water temperature from 2▿C to 10°C. Natural convection flow around upward-or downward-facing horizontal ice plate was divided into three regions according to the temperature variation of ambient water. The flow patterns of three regions were no flow, two-dimensional steady laminar flow and unsteady flow. Mean Nusselt number for the upward-facing surface had its maximum value at about 3°C of ambient water temperature. However, in the case of the downward-facing surface it increased as the ambient water temperature increased.     

共面转换液晶显示器中获得对比度高于1:600的新技术

薄膜晶体管液晶电视(TFT-LCD TV)因为具有薄、轻、紧凑和可随意放置的特点，已经占据了大部分电视机市场。除了这些物理特性以外，最重要的特性是已具有了良好像质的对比度。为了将对比度提高到1：600以上，对偏振片膜、背光源板、滤色片树脂、电极锥角和摩擦条件等都进行了研究。优化的背光板组合，光滑的电极锥角和摩擦方法的控制是提高对比度的主要控制因素。应用新开发的滤色片树脂，对获得高对比度最为有效。     

Feature selection techniques and comparative studies for large-scale manufacturing processes

In order to efficiently and effectively control an overall process in the process industry, a few important parameters should be identified from high-dimensional, non-linear, and correlated data. Feature selection techniques can be employed to extract a subset of process parameters relevant to product quality. The performance of these techniques depends on the precision of the prediction model formulated to quantify the relationship between the process parameters and the quality characteristics. Although the neural network-based partial least squares (NNPLS) method has been proven to be effective in prediction models for the aforementioned industrial process data, feature selection techniques appropriate for NNPLS models have yet to appear. Here, several techniques for scoring the relevance of process parameters to product quality are proposed and validated by applying three datasets. These experiments show that the proposed techniques can discriminate relevant process parameters from irrelevant ones.     

Impedance matching by series condensers for power receivers of in vivo robotic capsules

An impedance matching technique using series condensers for the power receivers of in vivo robotic capsules is proposed. The power delivery function of the condenser ratio and its optimal ratio are derived. Experimental results validate the derived function.     

Aluminum deoxidation equilibrium in liquid Ni-Fe alloys equilibrated with CaO-Al2O3 slags

The deoxidation equilibrium for Al in Ni-Fe alloys was studied in the equilibrium experiments between CaO-Al₂O₃ slags and Fe-30, 50 and 70 % Ni alloys at 1873 K. By using the values for the first and second order interaction parameters between oxygen and nickel in liquid iron and those between oxygen and iron in liquid nickel, the effect of Ni on the activity coefficient of Al in liquid iron and that of Fe on the activity coefficient of Al in liquid nickel were determined in the whole composition range of Ni-Fe alloys. The oxygen contents in Ni-Fe alloys calculated by the iterative method based on pure iron were in good agreement with those based on pure nickel in the range of [% Al] < 0.03. From this fact, it was found that the Wagner's approximation relating to the multi-component solution was applicable to the deoxidation equilibrium in the whole composition range of Ni-Fe alloys in the restricted concentration of a deoxidizer.     

Numerical analysis of the warpage problem in TSOP

The reliability and the solderability of thin small outline package (TSOP) are significantly affected by the warpage that is generated after epoxy molding compound (EMC) molding process. This warpage problem mainly results from the mismatch of material properties such as Young's modulus, Poisson's ratio and coefficient of thermal expansion (CTE) and the geometric structure of each component for TSOP. The optimization of both material properties and geometric structures using the numerical analysis is necessary to reduce the warpage of TSOP. However, there are still some limitations for the numerical analysis to obtain proper results consistent with the practical warpage values. In this paper, the numerical analysis is performed under the assumption of elastic behavior for EMC. Furthermore, to solve the limitations, the material properties at the molding temperature and the degree of reaction rate at the end of the molding process of EMC are considered together for the analysis. This numerical analysis gives the higher warpage values than the measured ones, and is applicable to the practical design of the reliable electronic package.     

A comparison of lightness contrast effects in CRT and surface colours

The simultaneous contrast effect is investigated in this article. A total of 174 and 154 test/induction combinations were studied for CRT and surface colours respectively. Each combination was assessed by nine observers using a matching technique. The test and induction colours used for CRT colours were similar to surface colours using fabric samples. The results indicated a strong lightness contrast effect for both CRT and surface media; that is, the lightness of a test colour surrounded by a lighter induction colour was reduced for both CRT and surface colours. However, the effect in CRT medium was more pronounced than in the surface medium. © 2004 Wiley Periodicals, Inc. Col Res Appl, 30, 13–20, 2005; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.20074     

Effective sludge solubilization treatment by simultaneous use of ultrasonic and electrochemical processes.

Sludge disintegration treatment by using simultaneously ultrasonic irradiation and electrolysis was investigated experimentally. A lab-scale diaphragm cell irradiated with ultrasound at a constant oscillating frequency of 20 kHz was used as a reactor. The batch experiments were carried out under different conditions of electric outputs of the ultrasonic generator, electric current for the electrolysis and different initial SS concentrations. A simultaneous treatment in the cathodic compartment without any chemical doses considerably facilitated the sludge solubilization, compared to the sonication alone. An increase in the electric current up to 400 mA under a constant ultrasonic density decreased the specific energy by 55% within the experimental range. The specific energy consumption was also reduced when the initial SS concentration increased. In addition, before carrying out the simultaneous treatment, a brief electrolysis was effective for further reduction of the specific energy and the acceleration of soluble COD generation.