多喷管液体火箭动力系统尾焰辐射特性研究

为研究多喷管液体火箭动力系统尾焰辐射特性,以液氢/液氧和液氧/煤油发动机组成的多喷管动力系统为模型,采用CFD技术对尾焰流场进行计算,利用气体辐射传输方程和大气透过率计算模型对尾焰辐射特性进行计算,结果表明:复燃反应主要发生在尾焰的边界与空气掺混区域,导致尾焰的辐射特性增强;随着飞行高度及观测角的增加,尾焰辐射特性逐渐增强;可视化计算可以有效捕捉到尾焰流场的结构。     

基于Wi-Fi即时定位与映射像素模板匹配的室内运动地图构建与定位

传统指纹定位方法由于建库人力时间开销大、系统通用性不强约束着指纹定位系统的推广,为了解决该问题同时结合即时定位与映射(SLAM)技术的优势,该文提出一种新的Wi-Fi/微机电系统(MEMS)融合室内运动地图构建与定位方法。首先利用行人航迹推算(PDR)、最小描述长度(MDL)原则和基于密度的空间聚类算法(DBSCAN)对众包运动轨迹进行预处理,提出基于轨迹主路径的运动地图构建方法。之后提出基于像素模板的地图匹配方法获取地图的绝对位置,并采用抗差扩展卡尔曼滤波(EKF)对目标位置进行最优估计。实验结果表明,所提聚类方法可以准确构建各区域运动地图,在少量的人力时间开销下实现较高的定位精度。     

Bone Plate Composed of a Ternary Nanohydroxyapatite/Polyamide 66/Glass Fiber Composite: Biocompatibility In Vivo and Internal Fixation for Canine Femur Fractures

Bone plates have been applied to fix fractures for over a hundred years. Metal plates are the gold standard. However, an increasing number of clinical practices and animal experiments have shown that metal plates have had incidents of failure due to their rigid fixation and long‐term complications. Degradable composites present the advantages of a lower elastic modulus and absorbable properties but are unsuitable for load‐bearing applications. Nondegradable bone plates composed of a nanohydroxyapatite/polyamide 66/glass fiber (n‐HA/PA66/GF) composite are prepared, which have enough strength and a low elastic modulus for an internal fixation device. To better assess its function as a bone plate, animal experiments are conducted using a canine load‐bearing femur fracture model. The results show that the n‐HA/PA66/GF plate can fix fractures effectively. Gross observation, radiographic films, and histological analysis all show that the n‐HA/PA66/GF plate leads to a secondary (indirect) union with obvious callus formation, whereas the titanium plate leads to primary (direct) union due to rigid fixation. Furthermore, the histological results reveal that new bone grows at the interface and that the n‐HA/PA66/GF plate can integrate with native bone tissue. Consequently, the n‐HA/PA66/GF composite shows good potential as a bone plate to fix loading‐bearing bone fractures.     

光电导及光反射法测量AlGaN薄膜的Al组分

ＡｌＧａＮ／ＧａＮ异质结兰光激光器和发光管近年来得到很大的发展．高速和高功率的ＡｌＧａＮ／ＧａＮ异质结场效应管（ＨＦＥＴ）的研究也得到很大的重视．ＡｌＧａＮ 薄层中的Ａｌ组分是决定此类器件的设计和性能的一个重要参量． 传统的测量组分的方法如ＸＰＳ和Ａｕｇｅｒ等方法需要大型的仪器,而且大多数方法是破坏性的,注意到ＡｌＧａＮ的禁带宽度Ｅｇ和Ａｌ组分有直接的关系,可以通过光学方法先测出Ｅｇ,用下式推算出Ａｌ的组分： Ｅｇ（ＡｌＧａＮ）＝ Ｅｇ（ＧａＮ）（１－ｘ）＋Ｅｇ（ＡｌＮ）ｘ－ｂｘ（１－ｘ）．其中ｘ是…     

基于盲信号分离算法的立体声回波抵消的研究

当处理混合语音信号时,传统的立体声回波抵消技术不具备修正参数的能力.因此,传统的立体声回波抵消技术对于信号传输的可靠性存在很大的问题,论文中,我们提出一种基于盲信号分离方法(BSS)的立体声回波抵消技术.在我们提出的系统中,我们通过分离回波信号和说话人的语音信号来达到移除回波信号的目的.结果证明,本方法对于传输信号的可靠性有明显的提高.     

Metabolic Regulation of Tumor Microenvironment with Biohybrid Bacterial Bioreactor for Enhanced Cancer Chemo-Immunotherapy

Immunogenic cell death (ICD) induced by specific chemotherapeutic agents is often hampered by the immunosuppressive tumor microenvironment (TME). Here, a bacterial bioreactor E@Fe-DOX, is developed, to enhance ICD-mediated antitumor immunity by in situ manipulation of tumor metabolism-immune interactions. The E@Fe-DOX bioreactor is constructed by depositing doxorubicin-loaded iron-polyphenol nanoparticles on Eubacterium hallii, which can specifically target hypoxic tumor regions and release doxorubicin and Fe³⁺ to induce ICD. In addition, Eubacterium hallii can continuously convert intratumoral lactate to butyrate, which inhibits the polarization of pro-tumoral M2-like macrophages and improves the function of tumor-infiltrating cytotoxic T cells. Furthermore, E@Fe-DOX promotes the formation of immune cell-aggregated tertiary lymph structures (TLS) to augment ICD-induced antitumor immunity. In murine tumor models, E@Fe-DOX significantly inhibits tumor growth and enhances immune checkpoint blockade (ICB) therapy. Overall, the developed living biomaterial offers a promising strategy to potentiate cancer chemo-immunotherapy by continuously regulating the intratumoral immuno-metabolic microenvironment.     

Deepening Insights into Aggregation Effect of Intermolecular Charge-Transfer Aggregates for Highly Efficient Near-Infrared Non-Doped Organic Light-Emitting Diodes over 780 nm

Though urgently needed, high-efficiency near-infrared (NIR) organic light-emitting diode (OLED) is still rare due to the energy-gap law. Formation of intermolecular charge-transfer aggregates (CTA) with nonadiabatic coupling suppression can decelerate non-radiative decay rates for high-efficiency NIR-OLEDs. However, the aggregation effect of CTA is still not fully understood, which limits the rational design of CTA. Herein, two CTA molecules with a same π-framework but different terminal substituents are developed to unveil the aggregation effect. In highly ordered crystalline states, the terminal substituents substantially affect the molecular packing motifs and intermolecular charge-transfer states, thus leading to distinct photophysical properties. In comparison, in amorphous states, these two CTA demonstrate similar photophysical behaviors and properties due to their similar molecular packing and intermolecular interactions as evidenced by molecular dynamics simulations. Importantly, the formations of amorphous CTA trigger multifunction improvements such as aggregation-induced NIR emission, aggregation-induced thermally activated delayed fluorescence, self-doping and self-host features. The non-doped OLEDs demonstrate NIR emissions centered at 788 and 803 nm, and high maximum external quantum efficiencies of 2.6% and 1.5% with small efficiency roll-off, respectively. This study provides deeper insight into the aggregation effect of CTA and lays a foundation for the development of high-efficiency NIR non-doped OLEDs.     

Ultraefficient Non-Doped Deep Blue Fluorescent OLED: Achieving a High EQE of 10.17% at 1000 cd m−2 with CIEy<0.08

The pursuit for efficient deep blue material is an ever-increasing issue in organic optoelectronics field. It is a long-standing challenge to achieve high external quantum efficiency (EQE) exceed 10% at brightness of 1000 cd m⁻² with a Commission International de L'Eclairage (CIE_y) <0.08 in non-doped organic light-emitting diodes (OLEDs). Herein, this study reports a deep blue luminogen, PPITPh, by bonding phenanthro[9,10-d]imidazole moiety with m-terphenyl group via benzene bridge. The non-doped OLED based on PPITPh exhibits an exceptionally high EQE of 11.83% with a CIE coordinate of (0.15, 0.07). The EQE still maintains 10.17% at the brightness of 1000 cd m⁻², and even at a brightness as high as 10000 cd m⁻², an EQE of 7.5% is still remained, representing the record-high result among non-doped deep-blue OLEDs at 1000 cd m⁻². The unprecedented device performance is attributed to the reversed intersystem crossing process through hot exciton mechanism. Besides, the maximum EQE of orange phosphorescent OLED with PPITPh as host is 32.02%, and remains 31.17% at the brightness of 1000 cd m⁻². Such minimal efficiency roll-off demonstrates that PPITPh is also an excellent phosphorescent host material. The result offers a new design strategy for the enrichment of high-efficiency deep blue luminogen.     

Properties of Indium-Doped ZnO Films Prepared in an Oxygen-Rich Plasma

Indium-doped zinc oxide (ZnO:In) films were prepared in an Ar:O₂ plasma by reactive magnetron sputtering. The x-ray diffraction (XRD) patterns presented the crystal structures of ZnO:In films, while transmission spectra and photoluminescence (PL) spectra showed the changed band gap and the visible emission from defects, as compared to the PL spectra of undoped ZnO films. It was concluded that the increase of substrate temperature enhanced the crystal quality of ZnO:In films; the incorporation of In made the c-axis constant of the samples larger than that of undoped ZnO films; the blue emission was due to the transition from an unknown donor level by indium doping to the valance band; and the orange-green emission originated from acceptor defects (O_Zn) formed in the O-rich plasma. Meanwhile, the current- voltage characteristics and persistent photoconductivity phenomenon also could be explained by the increased acceptor defects (O_Zn) that formed when the substrate temperature was increased.     

柠酸酸发酵废醪提取食用色素的研究

采用树脂法从柠檬酸废醪中提取食用色素—焦糖色素和黄色素。产品质量分别达到国家标准,同时使排放废液的ＣＯＤ由１０～１４万ｍｇ／ｌ降至１万ｍｇ／ｌ左右,ｐＨ由４．５～５．０升至７．０左右