Some prospective applications of silicon electrodeposition from molten fluorides to solar cell fabrication

Electrodeposition of both epitaxial and polycrystalline continuous films of dense, coherent, and well-adherent silicon coatings was achieved from molten fluorides. A dissolving Si anode and an operating temperature of about 750 C were utilized. Silicon electrocrystallization epitaxy (ECE) produced films with the (111) orientation on Si substrates of the same orientation. The unintentionally doped films were of p-type character with a resistivity in the range 0.05 - 0.10 Ω-cm. Polycrystalline Si films were similarly electroplated onto various polycrystalline metal substrates. Uniform coherent, and well-adherent coatings with grain diameters as large as 40 – 50 μm were obtained. The useful rate of electrodeposition of Si could be significantly increased by the application of an alternating square wave pulse (ASWP)₂technique. Cathodic current pulses as high as 300 mA/cm² (growth rate of about 5 μm/min) were demonstrated. The cathodic current efficiencies, for all modes of growth, were about 70 – 100%. The effects of the various operating parameters, and some prospective applications to the fabrication of solar cells, are discussed. This was paper A-6 in the 18th Annual Electronic Materials Conference, Salt Lake City, June 23–25, 1976.     

Effective discrepancy and numerical experiments

Many problems require the computation of a high dimensional integral, typically with a few tens of input factors, with a low number of integrand evaluations. To avoid the curse of dimensionality, we reduce the dimension before applying the Quasi-Monte Carlo method. We will show how to reduce the dimension by computing approximate Sobol indices of the variables with a two-levels fractional factorial design. Then, we will use the Sobol indices to define the effective discrepancy, which turns out to be correlated with the QMC error and thus enables one to choose a good sequence for the integral estimation.     

A continuous-wave hybrid AlGaInAs-silicon evanescent laser

We report a novel laser architecture, the hybrid silicon evanescent laser (SEL), that utilizes offset AlGaInAs quantum wells (QWs) bonded to a silicon waveguide. The silicon waveguide is fabricated on a silicon-on-insulator wafer using a complimentary metal-oxide-semiconductor-compatible process, and is subsequently bonded with the AlGaInAs QW structure using low temperature O/sub 2/ plasma-assisted wafer bonding. The optical mode in the SEL is predominantly confined in the passive silicon waveguide and evanescently couples into the III-V active region providing optical gain. The SEL lases continuous wave (CW) at 1568 nm with a threshold of 23 mW. The maximum temperature for CW operation is 60/spl deg/C. The maximum single-sided fiber-coupled CW output power at room temperature is 4.5 mW.     

Task Switching After Cerebellar Damage.

The authors of this study investigated task switching following cerebellar damage. The study group consisted of 7 children and adolescents (M age = 13.8 years) who underwent surgical removal of a benign posterior fossa tumor. They were tested at a sufficient interval after surgery (M lag = 6.13 years) for restoration of normal cognitive skills and intelligence. Although all showed normal learning of the task compared with control participants, when rapid behavioral changes were required (short preparation time), they exhibited behavioral rigidity manifested by enhanced switching cost. These results are in line with another study on serial reaction time with the same patients (A. Berger et al., in press). They have important implications for our understanding of the cognitive sequelae of early cerebellar damage as well as the involvement of the cerebellum in task switching. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Background Checks: Series introduction

Networks dominate today's computing landscape and commercial technical protection is lagging behind attack technology. As a result, protection programme success depends more on prudent management decisions than on the selection of technical safeguards. Managing Network Security takes a management view of protection and seeks to reconcile the need for security with the limitations of technology.     

State‐level Emergency Response to the September 11 Incidents: the Role of New Jersey's Department of Environmental Protection

Disaster preparedness and emergency response in the United States have become increasingly decentralised with state and local governments assuming a larger share of these responsibilities. Policy planners generally view these as positive developments because of the presumed greater adaptability of lower levels of government rapidly evolving crisis conditions. The terrorist incidents of September 11, 2001 required disaster managers across the country to take charge of a situation of an unanticipated type and magnitude. During the events' aftermath public attention was transfixed on activities at the World Trade Center in New York and the Pentagon outside of Washington, DC. However, emergency responders nation‐wide were simultaneously taking preventative measures to secure nuclear power plants, water resources, and other exposed facilities. This analysis highlights the immediate response activities implemented in New Jersey under the aegis of the state's Department of Environmental Protection (NJDEP). The discussion also considers several of the longer‐term initiatives carried out in the state during the subsequent period due to on‐going threat vulnerability assessments and actual events such as anthrax contamination. The conclusion assesses the implications of the September 11 incidents on emergency preparedness at the state level.     

Scaling Gross Primary Production (GPP) over boreal and deciduous forest landscapes in support of MODIS GPP product validation

The Moderate Resolution Imaging Radiometer (MODIS) is the primary instrument in the NASA Earth Observing System for monitoring the seasonality of global terrestrial vegetation. Estimates of 8-day mean daily gross primary production (GPP) at the 1 km spatial resolution are now operationally produced by the MODIS Land Science Team for the global terrestrial surface using a production efficiency approach. In this study, the 2001 MODIS GPP product was compared with scaled GPP estimates (25 km²) based on ground measurements at two forested sites. The ground-based GPP scaling approach relied on a carbon cycle process model run in a spatially distributed mode. Land cover classification and maximum annual leaf area index, as derived from Landsat ETM+ imagery, were used in model initiation. The model was driven by daily meteorological observations from an eddy covariance flux tower situated at the center of each site. Model simulated GPPs were corroborated with daily GPP estimates from the flux tower. At the hardwood forest site, the MODIS GPP phenology started earlier than was indicated by the scaled GPP, and the summertime GPP from MODIS was generally lower than the scaled GPP values. The fall-off in production at the end of the growing season was similar to the validation data. At the boreal forest site, the GPP phenologies generally agreed because both responded to the strong signal associated with minimum temperature. The midsummer MODIS GPP there was generally higher than the ground-based GPP. The differences between the MODIS GPP products and the ground-based GPPs were driven by differences in the timing of FPAR and the magnitude of light use efficiency as well as by differences in other inputs to the MODIS GPP algorithm—daily incident PAR, minimum temperature, and vapor pressure deficit. Ground-based scaling of GPP has the potential to improve the parameterization of light use efficiency in satellite-based GPP monitoring algorithms.