The insidious effects of failing to include design-driven correlated residuals in latent-variable covariance structure analysis.

In practice, the inclusion of correlated residuals in latent-variable models is often regarded as a statistical sleight of hand, if not an outright form of cheating. Consequently, researchers have tended to allow only as many correlated residuals in their models as are needed to obtain a good fit to the data. The current article demonstrates that this strategy leads to the underinclusion of residual correlations that are completely justified on the basis of measurement theory and research design. In many designs, the absence of such correlations will not substantially harm the fit of the model; however, failure to include them can change the meaning of the extracted latent variables and generate potentially misleading results. Recommendations include (a) returning to the full multitrait-multimethod design when measurement theory implies the existence of shared method variance and (b) abandoning the evil-but-necessary attitude toward correlated residuals when they reflect intended features of the research design. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Improved Bend Loss Formula Verified for Optical Fiber by Simulation and Experiment

This paper presents an improved curvature loss formula for optical waveguides, which is shown to accurately predict the bend loss of both single-mode and multimode fibers. The formula expands upon a previous formula derived by Marcuse, greatly improving its accuracy for the case of multimode fiber. Also presented are the results of bent fiber simulations using the beam propagation method (BPM), and experimental measurements of bend loss. Agreement among simulation, formula and measurement support the validity of both theoretical methods. BPM simulations showed that the lowest order modes of the bent fiber were reduced to their linearly polarized constituents prior to the onset of significant bend loss. This implies that certain LP mode orientations should propagate with much lower loss than previously expected, and should impact the mode stripping ability of bent large mode area fibers, as employed in fiber lasers and amplifiers.     

Mass spectrometry imaging for the proteomic study of clinical tissue

Over the last decade, MALDI-MS imaging has been used by researchers to explore areas of proteomics, lipidomics and metabolomics in samples of clinical origin for both targeted and global biomarker analysis. Numerous technological advancements in MS and clinical tissue MS imaging have been accomplished; hence, in this article we aim to critically discuss whether MS imaging has now in fact become a true champion of the ‘Omics Era’. In order to assess the potential for it to be routinely used in the clinical setting, it is pertinent to discuss some of its limitations, and to examine how these have been addressed by researchers. The key limitations of the technique we will discuss in this viewpoint article are as follows: sample throughput; relevance to patients, the availability of validated/standardised techniques; and integration with conventional pathology and other medical imaging techniques. Good progress has been made over the last 5 years in overcoming these limitations that had previously restricted the use of this technology in the clinical setting.     

Effectiveness of a participatory ergonomics intervention in improving communication and psychosocial exposures

A participatory ergonomics programme was implemented in an automotive parts manufacturing factory in which an ergonomics change team was formed, composed of members from management, the organized labour union and the research team. It was hypothesized that the participatory nature of this change process would result in enhanced worker perceptions of workplace communication dynamics, decision latitude and influence, which in conjunction with anticipated mechanical exposure reductions would lead to reduced worker pain severity. Utilizing a sister plant in the corporation as a referent group, a quasi-experimental design was employed with a longitudinal, repeat questionnaire approach to document pre-post intervention changes. Nine participatory activities (psychosocial interventions) were implemented as part of the process. Communication dynamics regarding ergonomics were significantly enhanced at the intervention plant compared to the referent plant. However, there were no significantly different changes in worker perceptions of decision latitude or influence between the two plants, nor did pain severity change. Possible explanations for these results include limited intervention intensity, context and co-intervention differences between the two plants, high plant turnover reducing the statistical power of the study and lack of sensitivity and specificity in the psychosocial measures used. Further research should include the development of psychosocial tools more specific to participatory ergonomic interventions and the assessment of the extent of change in psychosocial factors that might be associated with improvements in pain.     

Nutritional quality of complementary food prepared from unmalted and malted maize fortified with cowpea using extrusion cooking

The nutritional quality of extruded unmalted or malted maize fortified with cowpea as complementary food was assessed based on its proximate analysis, amino acid composition and results from rat feeding with the blends. Results indicated a slight decrease and increase in protein content due to malting and extrusion respectively. The changes in fat, crude fibre and ash content were not significant. The blends were a good source of energy, ranging from 1831 to 2045 kJ per 100 g. Extrusion significantly increased the amino acid content of the blends, while malting had a varied effect on each of the amino acids. There was no significant difference in the protein efficiency ratio (PER), net protein ratio (NPR) and weight gain of rats fed the blends when compared with the control (casein diet). The present study shows that malting improved the nutritional quality of the blends. Rats fed the casein diet had higher values for total digestibility (TD) and net protein utilisation (NPU). There was no significant difference (P > 0.05) in the internal organ weights of rats fed all blends except the protein‐free diet. © 2000 Society of Chemical Industry     

Combining beta-core fragment and total oestriol measurements to test for Down syndrome pregnancies

Recent articles by Cuckle et al., Canick et al., and Isozaki et al. have evaluated urine beta-core fragment as a screening test for Down syndrome in second-trimester pregnancies. They found over four-fold elevation of beta-core fragment levels in Down syndrome pregnancies, and between 62 and 88 per cent detection of this trisomy at a 5 per cent false-positive rate. Urine beta-core fragment may be a superior screening test for Down syndrome pregnancies. In the present study, urinary total oestriol has been evaluated as a marker to use in combination with beta-core fragment in screening for Down syndrome pregnancies. The two markers were evaluated separately in relation to the urine creatinine concentration. To amplify screening performance, we evaluated the ratio of beta-core fragment to total oestriol levels (creatinine-independent). beta-core fragment and total oestriol levels were determined (normalized to creatinine, ng/mg creatinine) in urine samples from 480 unaffected and 12 Down syndrome pregnancies, collected consecutively at a single prenatal diagnosis centre. The median beta-core fragment level in Down syndrome cases was 4.5 MOM. Fifty-eight per cent of Down syndrome cases had beta-core fragment levels exceeding the 95th centile of unaffected pregnancies. The median total oestriol level in Down syndrome cases was 0.33 MOM. Forty-two per cent of Down syndrome cases had total oestriol levels exceeding the 95th centile of unaffected pregnancies. We investigated the ratio of the two determinants (beta-core fragment, ng/ml divided by total oestriol, ng/ml) in our sample set. The median beta-core fragment:total oestriol ratio in Down syndrome cases was 13 MOM. Seventy-five per cent of Down syndrome cases had a ratio exceeding the 95th and the 99.5th centile of unaffected pregnancies. Total oestriol complements beta-core fragment in urine screening for Down syndrome pregnancies. A test measuring the ratio of the two urine determinants may be a significant improvement over current serum methods for detecting Down syndrome.     

Lentil lectin enriched microsomes from the plasma membrane of the human B-lymphocyte cell line H2LCL carry a heavy load of type-1 porin

Using an established biochemical approach, five subcellular fractions of human B lymphocytes were prepared by differential centrifugation. Crude membranes were passed over a lentil lectin column to enrich carbohydrate-coated cell surface microsomes. The lectin-bound fraction contained a high amount of plasma membrane-derived microsomes as indicated by cell surface markers. All subcellular fractions in Western blots proved to contain distinct but variable amounts of porin. There was a strong increase in porin content from crude membranes to plasma membrane-derived vesicles. The porin content of this fraction appeared to be higher than that of mitochondria. In the final step the plasma membrane-derived microsome fraction proved to be devoid of contamination by outer mitochondrial membranes, as revealed by antibodies against the established markers MAO B and Tom20 applied in Western blots. These data prove the extramitochondrial expression of human type-1 porin/ type-1 VDAC.     

Identification and characterization of human metabolites of CAI [5-amino-1-1(4''-chlorobenzoyl-3,5-dichlorobenzyl)-1,2,3-triazole- 4-carboxamide)

BACKGROUND: Bronchoscopic bronchoalveolar lavage in children to investigate bronchial disorders such as asthma has both ethical and procedural difficulties. OBJECTIVE: The aim of this study was to establish a standardized non-bronchoscopic method to perform bronchoalveolar lavage in children attending for elective surgery to obtain normal cellular data. METHODS: Bronchoalveolar lavage was performed on normal children (n = 55) by infusing saline (20 mL) through an 8 FG suction catheter passed after endotracheal intubation. Oxygen saturation, heart and respiratory rate were monitored during the bronchoalveolar lavage procedure. Cellular analysis and total protein estimation of the lavage fluid were performed. Epithelial lining fluid volume was calculated (n = 15) using the urea dilution method. RESULTS: The procedure was well tolerated by all children. Total cell count and differential cell count for children (macrophages 70.8 +/- 2.3%, lymphocytes 3.8 +/- 0.6%, neutrophils 5.7 +/- 1.0%, eosinophils 0.14 +/- 0.03%, epithelial cells 19.6 +/- 2.1%, mast cells 0.21 +/- 0.02%) were similar to those reported for adults. Age and sex comparisons revealed no differences between groups. The mean total protein recovered in the cell free supernatant was 49.72 +/- 4.29 mg/L and epithelial lining fluid volume was 0.82 +/- 0.11% of return lavageate. CONCLUSION: This method allows bronchoalveolar lavage to be performed safely and quickly on children attending for routine elective surgery. Using this method and taking the 'window of opportunity' of elective surgery, the presence or absence of airway inflammation could be studied in children with various patterns of asthma during relatively asymptomatic periods.     

Assessment of cohesion and adaptability in component family dyads: A question of convergent and discriminant validity.

In the assessment of family cohesion and adaptability, researchers typically overlook the possibility that different components of the family may be more cohesive or adaptable than others. This potential problem is often compounded by monomethodism, reliance on a single source of information. Using a multitrait-mutimethod approach, we obtained three measures of cohesion and adaptability in three component dyads of relatively healthy families. Mothers, fathers, and college students reported about cohesion and adaptability in the mother–student, father–student, and mother–father relationships. Using confirmatory factor analysis, we found significant differences in the convergent validities of mothers', fathers', and students' reports. Furthermore, significant differences emerged among the correlations between mother–father, mother–student, and father–student cohesion (and adaptability), which suggests that noteworthy differences exist between family subsystems on these constructs. Implications for assessment strategies in marital and family counseling are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Cyclic loading and fatigue in ice

Isotropic polycrystalline ice was subjected to cyclic loading in uniaxial compression at ?5°C, with stress limits 0–2 and 0–3 MPa, and frequencies in the range 0.043 to 0.5 Hz. Stress-strain records showed hysteresis loops progressing along the strain axis at non-uniform rates. The effective secant modulus, which was about half the true Young's modulus, decreased during the course of a test. The elastic strain amplitude and the energy dissipated during a loading cycle both increased with increase of time and plastic strain. Strain-time records gave mean curves which were identical in form to classical constant-stress creep curves, with a small cyclic alternation of recoverable strain about the mean curve. The inflection point of the “creep curve”, marking the transition from strain hardening to strain softening, occurred at a plastic strain of 1% (±0.1%), which is about the same as the “ductile failure strain” found in constant stress creep tests and in constant strain-rate tests on ice of the same type at the same temperature. The dissipation of strain energy up to this “failure point” was much higher for the cyclic tests than for corresponding quasi-static tests ? 100 to 600 kPa (or kN-m/m³) in comparison to about 30 kPa. The number of cycles taken to reach the “failure point” was of no direct significance, varying greatly with stress amplitude and with frequency. The results of the tests suggest that maximum resistance under compressive cyclic loading occurs at an axial plastic strain of about 1%, which is essentially the same as the failure strain for ductile yielding under constant stress and under constant strain-rate.