Modeling Temperature in Coupled Electrical and Thermal Simulations of the Electroconsolidation® Process

Electroconsolidation® is a process for densifying complex-shaped parts by using electrically conductive particulate solids as a pressure-transmitting medium. The part is immersed in a bed of the particulate medium contained in a die chamber. Sintering temperature is achieved by resistive heating of the medium while applying compaction pressure. The process is capable of ultrahigh temperatures and short cycle times and offers the potential for low processing costs.

Control of the process and selection of process conditions require knowledge of the temperatures within the die. Temperature gradients exist because of the high heating rate and because of variations of density and electrical resistivity of the medium due to the presence of the part. Direct measurement of temperature with thermocouples or other conventional means is impractical because of the high temperatures, high currents, and high pressures that are involved. Therefore, a computer model was developed to predict temperature as a function of time and applied voltage for any location in the die. The computer model is composed of three parts: a geometrical model to approximate the density and resistivity variations in the medium, a finite-element model to calculate the rate of resistive heating within each element, and a finite-difference model to calculate the temperature distribution based on solution of the heat-transfer equations. Predicted temperatures have been shown to be in excellent agreement with measurements, and numerical simulation provided encouraging consistency and reasonably accurate predictions of temperature profiles within the die. The model demonstrated the feasibility of a new process to achieve simultaneous application of pressure and heat to powder densification in Electroconsolidation.     

Characteristics of estrogen decomposition by ozonation.

Since the natural estrogens 17 beta-estradiol (E2) and estron (E1), and the synthetic estrogen 17 alpha-ethynyl estradiol (EE2) have strong endocrine disrupting effects and the tendency to persist in effluent from wastewater treatment plants, effective measures are needed to remove them from wastewater. In this research, to gain an understanding of the characteristics of estrogen decomposition by ozonation, experiments were conducted using effluent from an actual wastewater treatment plant. In this experiment, estrogen was added to effluent at a concentration of 200 ng/l and 20 ng/l before the ozonation experiments. The results showed 90% or more of estrogen concentration and estrogenic activity of E2, El and EE2 to be removed at an ozone dose of 1 mg/l. At an ozone dose of 3 mg/l, the estrogen concentration and estrogenic activity of E2, El and EE2 in the treated water fell below the detection limit. The removal rate was not influenced by the kind of estrogen. No generation of byproducts with estrogenic activity was observed. The authors conclude that estrogen in secondary treated wastewater can be almost entirely removed at the practical ozone dose rate applied for the purpose of disinfection, which is up to about 5 mg/l.     

A simple fiber-optic vehicle axle detector for roadways

This paper presents a fiber-optic vehicle axle detector for roadways. It is based on a fiber-optic Michelson interferometer that is mounted directly into the road surface. The fully dielectric design allows for remote operation of the sensor via a long section of optical fiber. A simple signal-processing scheme of the output signals has been adopted that allows for reliable detection of commercial and personal vehicles.     

Design of radiation-emission measurements of an air-traffic surveillance radar

The current work presents the procedure of designing and carrying out measurements of radiation emission from an air-traffic surveillance radar. The system requirements are first given, and then the equipment used is described. The steps to determine the operating characteristics of the radar are specified in detail. The necessary methods for manual power measurements and calculations are next explained. Since the final measurement system was fully automated, its main features (topology, protocol of operation) are also given. Finally, some measurement results taken during the initial phase of system operation are presented and discussed.     

Phase Separation in Ternary Liquid Systems Tetradecane-n-Octanol (or Cyclohexanone)-Lanthanide(III) Nitrate Solvates with Tri-n-Butyl Phosphate

The phase diagrams of ternary liquid systems tetradecane-n-octanol (or cyclohexanone)-lanthanide(III) nitrate solvates with tri-n-butyl phosphate [Ln(NO₃)₃(TBP)₃, Ln = La, Ce, Pr, or Sm] at T = 298.15 K were studied. These diagrams contain areas of homogeneous solutions and an area of separation into two liquid phases (I, II). Phases I and II are enriched in tetradecane and Ln(NO₃)₃(TBP)₃, respectively. n-Octanol and cyclohexanone mainly pass into phase II.     

The likelihood of violent behaviour: Predictions, postdictions, and hindsight bias.

Studied the effects of variations in base rate (BR) information and temporal context on predictions of violence and hindsight bias (HB). 270 undergraduates estimated the likelihood of violent offenders committing another violent offense based upon fictitious case history information. Ss were given 1 of 2 population BRs of the likelihood of reoffending (30% or 70%) and a recidivism estimation question that was phrased either predictively, predictively with a given outcome of either recidivism or no recidivism, or postdictively. Although different offenders were perceived as differentially likely to reoffend, estimated likelihood of recidivism was affected by neither BR nor temporal phrasing of the estimation task. A 2nd study of 182 undergraduates, using shorter case histories, also found no BR effect. HB effects were weak and inconsistent in both studies. (French abstract) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Algorithms for qualitative analysis of complex systems

Algorithms are proposed that construct first integrals and Lyapunov functions for stability analysis of stationary solutions of differential equations describing mechanical systems of linked bodies.Translated from Kibernetika i Sistemnyi Analiz, No. 1, pp. 138–148, January–February, 1992.