Fuzzy adaptive networks in machining process modeling: surface roughness prediction for turning operations

Due to the complexity of the machine tool structure and the cutting process, the dynamics of machining processes are still not completely understood. This is especially true due to the demand of high-speed machining to increase productivity. In order to model and control these complex processes, new approaches, which can represent complex phenomenon combined with learning ability, are needed. The combined neural–fuzzy approach appears to be ideally suited for this purpose. In this paper, the recently developed fuzzy adaptive network (FAN) is used to model surface roughness in turning operations. The FAN network has both the learning ability of neural network and linguistic representation of complex, not well-understood, vague phenomenon. Furthermore, it can continuously improve the initially obtained rough model based on the daily operating data. To illustrate this approach, a model representing the influences of machining parameters on surface roughness is established and then the model is verified by the use of the results of pilot experiments. Finally, a comparison with the results based on statistical regression is provided.     

中厚板在线30通道超声波探伤方法及应用

介绍了柳钢公司在生产锅炉板、压力容器板过程中，曾试用了６种探伤方法；而研制的３０通道在线超声波探伤法不仅可满足国家标准要求，而且能适应生产节奏，并具有快速、准确、简便的特点。     

TENSILE FRACURE IN AN Al-Li ALLOY 8090

ＴＥＮＳＩＬＥＦＲＡＣＵＲＥＩＮＡＮＡｌ－ＬｉＡＬＬＯＹ８０９０￥Ｊｉａｎｇ，Ｄａｍｉｎｇ；Ｗａｎｇ，Ｙｉｎｏｎｇ；Ｈｏｎｇ，Ｂａｎｄｅ；Ｌｅｉ，Ｔｉｎｇｑｕａｎ（ＨａｒｂｉｎＩｎｓｔｉｔｕｔｅｏｆＴｅｃｈｎｏｌｏｇｙ，Ｈａｒｂｉｎ１５００８０）Ｓｕ...     

Oxidation Behavior of Rh–30Ni–18Nb Refractory Superalloy

The isothermal-oxidation behavior of Rh–30Ni–18Nb refractory alloy was investigated up to a period of 312 hours in air from 1000 to 1350°C. A comparison of the oxidation behavior of this alloy with a conventional Ni-base superalloy (Inconel 713 C) shows an order-of-magnitude higher oxidation resistance. This experimental alloy oxidizes by forming alternate layers of Nb₂O₅ and RhO while NiO is on the surface in contact with air. Optical and scanning-electron microscopy (SEM) was used to study the microstructure and morphology for the characterization of the oxides. Thermal stability of the alloy for extended periods of exposure to air at 1400°C was studied using transmission-electron microscopy (TEM).     

CA6140车床数控改造中机械装置设计技巧

介绍了普通车床数控改造中机械装置的几个独特设计，使得数控车床纵向进给系统结构更简单、性能更可靠、装拆更方便。     

SHS制备陶瓷内衬复合管中多孔层抑制措施

研究了在重力自蔓延法制备陶瓷内衬复合钢管过程中在复合热管底部出现的多孔层现象,以及各类添加剂对其的影响,分析了多孔层出现的原因,探讨了抑制措施。试验结果表明,SiO2的存在是产生多孔层的主要原因,并且多孔层部分随着SiO2含量的增加而增加,助燃剂也能导致多孔层的出现。当SiO2的质量分数小于2%时,适量加入氟化物,可以有效减少多孔层的体积。     

一种内嵌导磁槽的圆感应同步器

圆感应同步器是一种高精度角度传感器,传统的圆感应同步器的转子需外引激励线以驱动其工作,鉴于圆感应同步器在使用过程中需要连续旋转,这将使得外引激励线存在绞线的问题,本文提出一种新的设计方法,在圆感应同步器的定、转子基体上嵌有环状的金属导磁槽,导磁槽内放入环状金属导线.通过给定子导磁槽内的环状金属导线施加激励信号,此激励信号可耦合到转子导磁槽内的环状金属导线中以驱动转子工作,这使得转子无需外引激励线,进而提高了系统应用的便利性以及可靠性.