Bending fatigue strength of case-carburized helical gears with large helix angles up to 40 degrees

Case-carburizing of helical gears with large helix angles may form too large hardened layers near the tooth width end on the acute angle side (ACUTE-END), and adversely affect the bending fatigue strength. We investigated the bending fatigue strength of casecarburized helical gears with large helix angles up to approximately 40° through a bending fatigue test, hardness test, and residual stress measurement. We found that the case-carburizing formed large hardened layers near ACUTE-END, reduced the compressive residual stress near ACUTE-END, and restricted the improvement of the bending fatigue strength in a meshing state where tooth root stress became large near ACUTE-END. Based on the obtained bending fatigue limits, we revealed that ISO 6336-3:2006 overestimated the rate of increase of the permissible circumferential loads for helix angles exceeding approximately 30°, and ISO/DIS 6336-3:2018 underestimated this rate for helix angles near 30°.

     

Effects of Using Alternative Extreme Pressure (EP) and Anti-Wear (AW) Additives with Oxy-Nitrided Samples

Oxy-nitriding is a widely used industrial process aiming to improve the tribological properties and performance of components. Previous studies have shown the effectiveness of the treatment with friction and wear performance, but very few have focussed on optimising this behaviour. The lubrication properties of several EP and AW additives were examined to investigate their effectiveness in improving the tribological properties of the layers formed after treatment. Previous studies showed the presence of an oxide layer on the sample could improve the effectiveness of the sulphurised olefin (SO) and tricresyl phosphate (TCP) additives. The friction and wear behaviour of oxy-nitrided samples were analysed using a tribometer and surface profiler. Scanning electron microscope, energy-dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy were employed to identify the morphologies and chemical compositions of the treated surface before and after testing. No real effect on friction was observed when using the SO or TCP additives, mostly due to lack of interaction with the less reactive iron nitride layer and their roles as anti-wear additives. However, when the zinc dialkyldithiophosphate-containing lubricant was used, a higher friction coefficient was observed. Greater improvements in anti-wear properties with the presence of additives in comparison with only using base oil were reported, with the TCP additive producing the lowest wear rates. The study effectively demonstrated that the additive package type used could impact the tribological and tribochemical properties of oxy-nitrided surfaces.     

Electrophoretic cell manipulation and electrochemical gene-function analysis based on a yeast two-hybrid system in a microfluidic device

A novel microfluidic device with an array of analytical chambers was developed in order to perform single-cell-based gene-function analysis. A series of analytical processes was carried out using the device, including electrophoretic manipulation of single cells and electrochemical measurement of gene function. A poly(dimethylsiloxane) microstructure with a microfluidic channel (150 microm in width, 10 microm in height) and an analytical chamber (100 x 20 x 10 microm (3)) were fabricated and aligned on a glass substrate with an array of Au microelectrodes. Two microelectrodes positioned in the analytical chamber were employed as a working electrode for the electrophoretic manipulation of cells and electrochemical measurements. A yeast strain ( Saccharomyces cerevisiae Y190) carrying the beta-galactosidase reporter gene was used to demonstrate that the device could detect the enzyme. Target cells flowing through the main channel were introduced into the chamber by electrophoresis using the ground electrode laid on the main channel. When the cell was treated with 17beta-estradiol, gene expression was triggered to produce beta-galactosidase, catalyzing the hydrolysis of p-aminophenyl-beta- D-galactopyranoside to form p-aminophenol (PAP). The enzymatically generated PAP was detected by cyclic voltammetry and amperometry at the single-cell level in the chamber of the device. Generator-collector mode amperometry was also applied to amplify the current response originating from gene expression in the trapped single cells. After electrochemical measurement, the trapped cells were easily released from the chamber using electrophoretic force.     

Imprinting of Igf2 and H19 from a 130 kb YAC transgene

A stringent test for imprint control elements is to examine their function at ectopic loci in transgenic experiments. Igf2 and H19 are part of a larger imprinting region and as a first step, we examined these reciprocally imprinted genes in transgenic experiments using a 130 kb YAC clone. After paternal inheritance, H19 was appropriately repressed and Igf2 was expressed, irrespective of copy number or genetic background. After maternal inheritance H19 was consistently expressed, albeit with some variability. The levels of H19 expression per copy of the transgene inversely correlated with Igf2 (-lacZ) expression in cis. The consistent imprinting of H19 from this YAC contrasts with the previously described imprinting of mini-H19 transgenes, which only occurs at multi-copy loci, is inconsistent, and is prone to genetic background effects. We propose a novel model in which silencing of the H19 gene is the default state and its activation after maternal inheritance is the key mechanistic event for imprinting in this region. In addition, in situ analysis of the Igf2-lacZ reporter indicates that additional mesoderm-specific enhancers are present within the YAC clone. No obvious phenotype was detected from the excess gene dosage of H19.     

Atrophy of the cerebellum and brainstem in dentatorubral pallidoluysian atrophy. Influence of CAG repeat size on MRI findings

To elucidate how the size of the expanded CAG repeat of the gene for dentatorubral pallidoluysian atrophy (DRPLA) and other factors affect the atrophy of the brainstem and cerebellum, and the appearance of high-intensity signals on T2-weighted MRI of the cerebral white matter of patients with DRPLA, we quantitatively analyzed the MRI findings of 26 patients with DRPLA, the diagnosis of which was confirmed by molecular analysis of the DRPLA gene. When we classified the patients into two groups based on the size of the expanded CAG repeat of the DRPLA gene (group 1, number of CAG repeat units > or = 66; group 2, number of CAG repeat units < or = 65), we found strong inverse correlations between the age at MRI and the areas of midsagittal structures of the cerebellum and brainstem in group 1 but not in group 2. Multiple regression analysis, however, revealed that both the patient's age at MRI and the size of the expanded CAG repeat correlated with the areas of midsagittal structures. Involvement of the cerebral white matter as detected on T2-weighted images was observed more frequently in patients belonging to group 2 than in group 1 patients. Furthermore it was demonstrated that high-intensity signals can be detected on T2-weighted images of the cerebral white matter of patients with a largely expanded CAG repeat (group 1) in their thirties. These results suggest that patient age as well as the size of the expanded CAG repeat are related to the degree of atrophy of the brainstem and cerebellum, and the white matter changes in patients with DRPLA.     

Size effect in the low-field Hall coefficient of single-crystal copper films

Measurements of the low-field Hall coefficientR _H of single-crystal copper films were made at 4.2 K by the use of a SQUID. The surface normaln of the samples was directed in the [100], [110], and [111] directions and the ratio of the thickness to the mean free path ranged from 0.1 to 0.7. It is found that the effect of surface scattering causesR _H to decrease whenn [100], whereas it causesR _H to increase whenn [110] and [111]. This behavior is interpreted in terms of the geometrical characteristics of the Fermi surface.     

Detection of serum p53 antibodies in patients with esophageal squamous cell carcinoma: correlation with clinicopathologic features and tumor markers

The significance of serum p53-Abs in patients with esophageal squamous cell carcinoma was determined. Examination of clinicopathological features and assessment of tumor marker sensitivities of carcinoembryonic antigen (CEA), squamous cell carcinoma antigen (SCC-Ag) and CYFRA21-1 were performed. Thirty-three (58%) of 57 patients were positive for serum p53-Abs, however, no relation with cancer progression existed. Fourteen of the 33 sero-positive patients revealed normal levels of all tumor markers tested. Thus, serum p53-Abs appears to be a useful marker for the detection of esophageal squamous cell carcinoma.     

Clonidine reduces dopamine and increases GABA in the nucleus accumbens: an in vivo microdialysis study

The spectrum of infectious disease (ID) emergencies in hospitalized patients was assessed in a prospective study of 3,626 inpatient ID consultations in a 1,350-bed teaching hospital. ID emergencies, defined by a need or anticipated need for advanced life support or by irreversible organ damage leading to permanent functional loss, were encountered in 175 patients. Infections of the central nervous system (26.3%), cardiovascular system (14.9%), alimentary system (13.1%), and lower respiratory tract (7.4%) and adverse reactions to antimicrobial agents (7.4%) were most common. In 18.9% of the cases, the referring clinicians were unaware of the emergency at the time of referral. Drug reactions (46.1%), severe alimentary and peritoneal infections (32.0%), upper respiratory tract infections (28.6%), and skin and soft-tissue infections (27.3%) were most frequently missed. The emergency ID conditions were not recognized because they had an atypical presentation (51.5%), were not commonly seen in the referring specialty (24.2%), were due to rare organisms (15.2%), or had unusual anatomical sites of involvement (9.1%). A close liaison between clinicians and the ID team is crucial for recognition of ID emergencies at their early stages so that appropriate investigations and management can be instituted expediently, before the occurrence of irreversible damage.     

Increase in the expression of biglycan mRNA expression Co-localized closely with that of type I collagen mRNA in the infarct zone after experimentally-induced myocardial infarction in rats

Biglycan, a small dermatan sulphate proteoglycan, has been postulated to interact with other components of the extracellular matrix (ECM), specifically collagens. We hypothesized that biglycan messenger ribonucleic acid (mRNA) is increased in the myocardial infarct zone. Biglycan mRNA expression after acute myocardial infarction (AMI) in rats was determined with the use of Northern blotting and in situ hybridization, and its expression pattern was compared to that of type I collagen mRNA [alpha1(I) collagen]. The left coronary artery was ligated in male Sprague-Dawley rats, and the hearts were excised on days 2 and 7. The Northern blot analysis demonstrated that expression of biglycan mRNA in the infarct on days 2 and 7 were 4.0- and 6.8-fold higher, respectively, compared to the sham-operated hearts. The in situ hybridization revealed intense signals for both biglycan and alpha1(I) collagen mRNA on day 2 in the spindle-shaped mesenchymal cells located between the surviving myocytes in the infarct peripheral zone. On day 7, biglycan mRNA signals were observed in the interior of the infarct around the infarct granulation tissue, a distribution that was essentially the same as that of alpha1(I) collagen. These results demonstrated that the increases in the infarct biglycan mRNA expression produced by mesenchymal cells (presumably myofibroblasts and fibroblasts) was closely co-localized with that of type I collagen mRNA, indicating that biglycan contributes to the infarct healing processes.