Association and physical gelation of ABA triblock copolymer in selective solvent

Association behavior and physical gelation mechanism of ABA triblock copolymer dissolved in B-selective solvent have been studied systematically from dilute to moderately concentrated solutions. Static and dynamic light scattering and nuclear magnetic resonance measurements for dilute solutions of poly(methyl methacrylate)-block-poly(tert-butyl acrylate)-block-poly(methyl methacrylate) (PMMA-PtBuA-PMMA) in 1-butanol (PtBuA selective solvent) indicated that PMMA-PtBuA-PMMA chains are molecularly dissolved above 50 °C. With decreasing temperature, the triblock copolymers form associated micelles consisting PMMA associated core and PtBuA shell. Linear dynamic viscoelastic measurements for solutions with moderate concentration (3.9-12.0 wt%) revealed that the system was viscous sol state at 60 °C. Drastic increase of shear storage modulus (G′) occurred with decreasing temperature, and at 25 °C, G′ showed rubbery plateau with weak frequency dependency, means the formation of elastic physical gel. The consistency between the temperature for micelle formation and that at the increase in G′ indicates that the physical gelation is owing to the network formation as the result of the association of PMMA chains and the bridging PtBuA chains connecting the PMMA cores. Master curves for the dynamic moduli were derived by time-temperature superposition along the frequency axis. Just above sol-gel transition concentration (C_gel), the master curves suggest the existence of fairy amount of aggregate that is not incorporated in the macroscopic network. With the increase in polymer concentration, the master curves become to reveal Maxwell-type viscoelasticity with narrow relaxation time distribution, suggesting the formation of transient network with easily generation and destruction of crosslinks. Concentration dependency of the plateau modulus is stronger than the theoretically expected, means the macroscopic transient network grows with polymer concentration by increasing the fraction of elastically effective bridging PtBuA chain above C_gel.     

Application of the Solvothermal Process in the Synthesis of High-performance Ag/γ-Al_2O_3 Catalysts

1 INTRODUCTION Since Cu-ZSM-5 was reported as an effective catalyst for the selective catalytic reduction (SCR) of NO by hydrocarbons in the presence of excess oxygen, the SCR of NOx has received much attention as a kind of potential technology for cleaning NOx in various oxygen-rich exhausts of diesel engine, lean burning gasoline engine and gas engine. Although a number of catalysts have been tested, to date, it still seems to be difficult to find a catalyst that is completely suit…     

Simple method of determining plasma impedance of streamer discharge in atmospheric air

For atmospheric streamer discharges using a lightning impulse generator, we demonstrate a method of determining the plasma impedance in a streamer region by analyzing the periodic attenuated discharge waveforms having high-frequency components. When the streamer region in the plasma can be treated as an equivalent series circuit model including resistance and inductance elements, the regression waveforms obtained by reducing and smoothing the discharge waveforms are analyzed in the equivalent circuit. We found that the streamer resistance increased exponentially with time after the discharge, whereas the streamer inductance and series impedance were constant at 4.0 Ω for longer than the first period of the discharge waveforms. Moreover, the slope of the regression curve increases more rapidly for the positive streamer resistance than for the negative resistance. Finally, the absolute values of the streamer impedance versus time were 3.3-19 Ω and 3.5-9.0 Ω for positive and negative discharges, respectively.     

The Visual Computing of Projector‐Camera Systems

This article focuses on real‐time image correction techniques that enable projector‐camera systems to display images onto screens that are not optimized for projections, such as geometrically complex, coloured and textured surfaces. It reviews hardware‐accelerated methods like pixel‐precise geometric warping, radiometric compensation, multi‐focal projection and the correction of general light modulation effects. Online and offline calibration as well as invisible coding methods are explained. Novel attempts in super‐resolution, high‐dynamic range and high‐speed projection are discussed. These techniques open a variety of new applications for projection displays. Some of them will also be presented in this report.     

Transflective IPS‐LCD with improved reflective contrast ratio

Abstract— In order to improve the reflective contrast ratio of transflective IPS‐LCDs, a novel pixel design for a normally white reflective IPS has been proposed. In this design, the large‐inter‐electrode‐spacing layout using a novel driving method and a double‐layered electrode have effectively reduced the light leakage. By applying these two technologies, a transflective IPS‐LCD has been successfully demonstrated with a high contrast ratio (15:1) in the reflective mode and a wide‐viewing‐angle characteristic in the transmissive mode.     

3He Melting Pressure Measurements in High Magnetic Fields

Experimental methods and preliminary results of high-precision measurements of the ³ He melting curve in high magnetic fields have been described. The purpose of this work is twofold. One is to establish a reliable millikelvin temperature scale in high fields (T 10 mK, B 15 T), The other is to investigate a high field region of the magnetic phase diagram of solid ³ He by measuring the melting pressure down to temperatures below 1 mK. Besides the two superfluid transitions, the phase transition temperatures between the spin ordered solid and the paramagnetic solid, T _HFP , were determined at B = 12 and 10 T with good accuracy, which is an extension of previous measurements up to 8 T. The present T _HFP (B) line can not be scaled to that at a higher density with a single Grüneisen parameter, indicating a variation of density dependencies of the multiple-spin exchange interactions.     

Dynamic defocus and occlusion compensation of projected imagery by model-based optimal projector selection in multi-projection environment

This paper presents a novel model-based approach of dynamic defocus and occlusion compensation method in a multi-projection environment. Conventional defocus compensation research applies appearance-based method, which needs a point spread function (PSF) calibration when either position or orientation of an object to be projected is changed, thus cannot be applied to interactive applications in which the object dynamically moves. On the other hand, we propose a model-based method in which PSF and geometric calibrations are required only once in advance, and projector’s PSF is computed online based on geometric relationship between the projector and the object without any additional calibrations. We propose to distinguish the oblique blur (loss of high-spatial-frequency components according to the incidence angle of the projection light) from the defocus blur and to introduce it to the PSF computation. For each part of the object surfaces, we select an optimal projector that preserves the largest amount of high-spatial-frequency components of the original image to realize defocus-free projection. The geometric relationship can also be used to eliminate the cast shadows of the projection images in multi-projection environment. Our method is particularly useful in the interactive systems because the movement of the object (consequently geometric relationship between each projector and the object) is usually measured by an attached tracking sensor. This paper describes details about the proposed approach and a prototype implementation. We performed two proof-of-concept experiments to show the feasibility of our approach.     

Design of discrete time adaptive PID control systems with parallel feedforward compensator

This paper deals with the design of an adaptive PID control system with a parallel feedforward compensator (PFC) for discrete-time SISO systems and its application to water level control of a 3-tank system. The proposed method utilizes the characteristics of almost strict positive realness (ASPR) of the controlled plant. A conventional design scheme of a PFC which realizes an ASPR augmented controlled plant is also proposed. Further it is shown that the introduction of an internal model improves the control performance of the control system with the PFC. The effectiveness of the proposed method is confirmed through water level control experiments on a three-tank SISO system.