CO2 reduction using hydrothermal method for the selective formation of organic compounds

The reduction of CO₂ under hydrothermal conditions has been investigated. In typical experiment, Fe-powder, Ni-powder, solvent, and CO₂ have been reacted in a batch-type micro autoclave under hydrothermal conditions for several hours. Methane, formic acid, and hydrogen were generated after treatment in water. With the rise of Ni amount, the methane yield increased while hydrogen and formic acid decreased. It is supposed that Ni has acted as a hydrogenation catalyst. In basic solution, CO₂ was converted to formic acid selectively at 300°C involved with trace of methane. Considering the reduction characteristics of formic acid, the reaction pathway has been discussed. In experiments with the mixture of Fe and Fe₃O₄, trace of methanol was detected at the experiments with less amount of metallic Fe. It is inferred that the control on the effect of reductant is indispensable for oxygenated organic compound formation. Experiment on the effect of water has been conducted using hydrogen. Ethane yield increased with the amount of water, while there was no drastic change in the yield of methane. From these results, it is supposed that the steam reforming reaction of methane was involved in the reduction of CO₂, and effected on the C–C bond formation.     

Variations of stress intensity factor of a semi-elliptical surface crack subjected to mixed mode loading

Maximum stress intensity factors of a surface crack usually appear at the deepest point of the crack, or a certain point along crack front near the free surface depending on the aspect ratio of the crack. However, generally it has been difficult to obtain smooth distributions of stress intensity factors along the crack front accurately due to the effect of corner point singularity. It is known that the stress singularity at a corner point where the front of 3 D cracks intersect free surface is depend on Poisson's ratio and different from the one of ordinary crack. In this paper, a singular integral equation method is applied to calculate the stress intensity factor along crack front of a 3-D semi-elliptical surface crack in a semi-infinite body under mixed mode loading. The body force method is used to formulate the problem as a system of singular integral equations with singularities of the form r ⁻³ using the stress field induced by a force doublet in a semi-infinite body as fundamental solution. In the numerical calculation, unknown body force densities are approximated by using fundamental density functions and polynomials. The results show that the present method yields smooth variations of mixed modes stress intensity factors along the crack front accurately. Distributions of stress intensity factors are indicated in tables and figures with varying the elliptical shape and Poisson's ratio.     

A parallel method for large sparse generalized eigenvalue problems using a GridRPC system

In this paper we present a master–worker type parallel method for finding several eigenvalues and eigenvectors of a generalized eigenvalue problem , where A and B are large sparse matrices. A moment-based method that finds all of the eigenvalues that lie inside a given domain is used. In this method, a small matrix pencil that has only the desired eigenvalues is derived by solving large sparse systems of linear equations constructed from A and B. Since these equations can be solved independently, we solve them on remote servers in parallel. This approach is suitable for master–worker programming models. We have implemented and tested the proposed method in a grid environment using a grid RPC (remote procedure call) system called OmniRPC. The performance of the method on PC clusters that were used over a wide-area network was evaluated.     

Visualizing Intramolecular Dynamics of Membrane Proteins

Membrane proteins play important roles in biological functions, with accompanying allosteric structure changes. Understanding intramolecular dynamics helps elucidate catalytic mechanisms and develop new drugs. In contrast to the various technologies for structural analysis, methods for analyzing intramolecular dynamics are limited. Single-molecule measurements using optical microscopy have been widely used for kinetic analysis. Recently, improvements in detectors and image analysis technology have made it possible to use single-molecule determination methods using X-rays and electron beams, such as diffracted X-ray tracking (DXT), X-ray free electron laser (XFEL) imaging, and cryo-electron microscopy (cryo-EM). High-speed atomic force microscopy (HS-AFM) is a scanning probe microscope that can capture the structural dynamics of biomolecules in real time at the single-molecule level. Time-resolved techniques also facilitate an understanding of real-time intramolecular processes during chemical reactions. In this review, recent advances in membrane protein dynamics visualization techniques were presented.     

Effect of Hypoxia on Pulmonary Endothelial Cells from Bleomycin-Induced Pulmonary Fibrosis Model Mice

Pulmonary fibrosis is a progressive and fatal disorder characterized by dysregulated repair after recurrent injury. Destruction of the lung architecture with excess extracellular matrix deposition induces respiratory failure with hypoxia and progressive dyspnea. The impact of hypoxia on pulmonary endothelial cells during pulmonary fibrogenesis is unclear. Using a magnetic-activated cell sorting system, pulmonary endothelial cells were isolated from a mouse model of pulmonary fibrosis induced by intratracheally administered bleomycin. When endothelial cells were exposed to hypoxic conditions, a hypoxia-inducible factor (HIF)-2α protein was detected in CD31- and α-smooth muscle actin (SMA)-positive cells. Levels of plasminogen activator inhibitor 1, von Willebrand factor, and matrix metalloproteinase 12 were increased in endothelial cells isolated from bleomycin-treated mice exposed to hypoxic conditions. When endothelial cells were cultured under hypoxic conditions, levels of fibrotic mediators, transforming growth factor-β and connective tissue growth factor, were elevated only in endothelial cells from bleomycin-treated and not from saline-treated lungs. The increased expression of α-SMA and mesenchymal markers and collagen production in bleomycin- or hypoxia-stimulated endothelial cells were further elevated in endothelial cells from bleomycin-treated mouse lungs cultured under hypoxic conditions. Exposure to hypoxia damaged endothelial cells and enhanced fibrogenesis-related damage in bleomycin-treated pulmonary endothelial cells.     

Multiresidue method for pesticides and veterinary drugs in bovine milk using GC/MS and LC/MS/MS

A simple, sensitive and selective method with gas chromatography/mass spectrometry (GC/MS) and liquid chromatography/tandem mass spectrometry (LC/MS/MS) has been developed to detect 342 pesticides and veterinary drugs contaminating bovine milk at the maximum residue limits (MRLs) defined in the "positive list system". Sample preparation was performed by extracting the analytes with acetonitrile, followed by salting-out with sodium chloride. For some pesticides, the extract was further cleaned up by n-hexane partitioning and PSA cartridge column chromatography. GC/MS-EI or -NCI was used to determine pesticide residues, while LC/MS/MS-ESI was applicable to the determination of pesticide and veterinary drug residues. The variation of the recoveries of these drugs at MRL was relatively wide; however the relative standard deviations of the recovery of each drug were within 28%, suggesting that the present method is good enough for use as a screening test for contaminants at the MRLs. These results show that this method is useful for multiresidue analysis of numerous pesticides and veterinary drugs in bovine milk.     

Investigation of the Aroma Profile of Green Tea Leaves Using Organic Synthesis and Conventional Analytical Techniques

Although many aroma components have been identified in green tea leaves, the aroma compounds contributing to green tea＇s characteristic odor have not yet been reported. The authors recently reported that aroma components with a matcha-like odor are present in both green tea and black tea prepared from the Sayamakaori tea cuttivar. This matcha-like odor is similar to the odor of commercial available matcha （high-quality powdered green tea）, and is a specific odor feature of green tea leaves. At present, the green-tea odor is thought to arise from the combination of a large number of constituents. Recent reports indicate that a complex interaction between olfactory receptors and odorants is important for the evaluation of the odors. Taking into consideration these findings, the authors investigated the aroma profile of green tea, focusing on the characteristic molecular structures of the constituents that give matcha-like odor. Using a combination of organic synthesis and gas chromatography-mass spectrometry plus gas chromatography-olfactometry, the authors identified aroma components with matcha-like odors in five other tea cultivars. This investigation also revealed that several compounds with a formyl group were important constituents of the aroma of green tea leaves, although the odor of each constituent was not individually similar to the tea＇s overall aroma. The authors found for the first time a group of key components that have the matcha-like odor.     

Methodology to optimize radiation protection in radioactive waste disposal after closure of a disposal facility based on probabilistic approach

We propose a methodology to optimize radiation protection in radioactive waste disposal after the closure of a disposal facility based on a probabilistic approach. In this methodology, a set of alternative options of the disposal system design with the associated uncertainties estimated through a probabilistic approach are developed. Then, the methodology evaluates the advantages and disadvantages of each option for the optimization of radiation protection, in which it is possible to determine the compliance with a dose constraint of 0.3 mSv/y and to collect information for making a decision on the optimization. In particular, the obtained information on the exposure, which is the mode and width of the dose distribution, can be converted into information on engineering measures and site conditions for the options. This process allows us to discuss which option should be selected as the optimal option by considering the balance between the exposure and the engineering, economic, and social feasibility of the option. This methodology is helpful for providing clear reasons why an optimal disposal system design is selected by combining quantitative information on the exposure and the feasibility of each option.     

Three-dimensional rainbow schlieren measurements in underexpanded sonic jets from axisymmetric convergent nozzles

The rainbow schlieren deflectometry has been combined with the computed tomography to obtain three-dimensional density fields of shock containing free jets and we call the method the schlieren CT. Experiments on the schlieren CT have been performed at a nozzle pressure ratio of 4.0 by using an axisymmetric convergent nozzle with an inner diameter of 10 mm at the exit where the nozzle was operated at an underexpanded condition. Multidirectional rainbow schlieren pictures of an underexpanded sonic jet can be acquired by rotating the nozzle about its longitudinal axis in equal angular intervals and the three-dimensional density fields are reconstructed by the schlieren CT. The validity of the schlieren CT is verified by a comparison with the density fields reconstructed by the Abel inversion method. As a result, it is found that excellent quantitative agreement is reached between the three-dimensional jet density fields reconstructed from both methods.