Effect of type of processing on the microstructural features and mechanical properties of Al-Cu/SiC metal matrix composites

In this study, an aluminum based metallic matrix (Al-2wt.% Cu) was reinforced with SiC particulates using a conventional casting technique and a new disintegrated melt deposition technique. Microstructural characterization studies conducted on the samples taken from disintegrated melt deposition technique revealed a more uniform distribution of SiC particulates and good interfacial integrity between SiC particulates and metallic matrix when compared to the conventionally cast composite samples. Results of ambient temperature mechanical tests demonstrate an increase in 0.2% YS and ultimate tensile strength of samples taken from disintegrated melt deposition technique when compared with the unreinforced and conventionally cast composite samples. The results of microstructural characterization and mechanical testing were finally rationalized in terms of the nature of processing technique employed to reinforce Al-2wt.% Cu metallic matrix with SiC particulates.     

Conservation laws and shock waves in the theory of relaxation heat transfer

A set of divergent forms of heat-transfer equations are presented. New laws are established that govern the behavior of the temperature field behind the front of a strong discontinuity. Comparison of theoretical and experimental data on the propagation of nonlinear waves in a sapphire crystal and liquid helium is carried out. Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 70, No. 2, pp. 318–325, March–April 1997.     

The MiniWiD-Coater. III. Effect of Application Temperature on the Dissolution Profile of Sustained-Release Theophylline Pellets Coated with Eudragit Rs 30 D

Theophylline pellets were coated with Eudragit RS 30 D in a miniature fluid-bed pan coater called MiniWiD developed recently. The dispersions were plasticized with varying amounts of triethyl citrate (TEC), dibutyl phthalate (DBP), and polyethylene glycol 6000 (PEG) and applied at different temperatures ranging from 25 to 45 °C. Theophylline release was tested by dissolution using the USP Apparatus 2 (paddle) in 0.1 N hydrochloric acid under sink conditions over 6 hours.

At a coating level of 4 % (0.7 mg/cm²) sustained-release profiles were obtained from dispersions plasticized with TEC or DBP. By reducing the amount of plasticizer from 20 to 10%, films with higher permeabilities were obtained. This effect was compensated by tempering the pellets at 50 deg;C for 24 hours. The coating temperature had little effect on the dissolution profiles of TEC-plasticized films and no effect on films with DBP.

Coatings plasticized with 20% PEG were applied at temperatures ranging from 25 to 45 °C. These films required a coating level of about 18 % (3.3 mg/cm²) to provide comparable sustained-release properties. In contrast to DBP and TEC, a strong influence of the coating temperature on the release rates was observed in which higher temperatures led to slower release rates. This behavior can be explained by the minimum film-forming temperature (MFT). Since PEG does not lower the MFT of Eudragit RS 30 D, the application of these films below the MFT of 45 °C is associated with a lower degree of film formation.     

Parallel, self-organizing, hierarchical neural networks. II

For pt.I see IEEE Trans. Neural Networks, vol.1, p.167-78 (1990). Parallel, self-organizing, hierarchical neural networks (PSHNNs) involve a number of stages with error detection at the end of each stage, i.e., rejection of error-causing vectors, which are then fed into the next stage after a nonlinear transformation. The stages operate in parallel during testing. Statistical properties and the mechanisms of vector rejection of the PSHNN are discussed in comparison to the maximum likelihood method and the backpropagation network. The PSHNN is highly fault tolerant and robust against errors in the weight values due to the adjustment of the error detection bounds to compensate errors in the weight values. These properties are exploited to develop architectures for programmable implementations in which the programmable parts are reduced to on-off or bipolar switching operations for bulk computations and attenuators for pointwise operations     

The greenhouse effect; Impact upon and the role to be played by construction

The authors highlight several possible ways in which the construction industry could lower present emissions of the greenhouse gas, carbon dioxide. It is an excellent discussion document and is recommended reading.     

Far-infrared pump-probe measurement of the lifetime of the 2p−1 shallow donor level in n-GaAs

The low temperature lifetime of electrons excited in the 2p^?1 donor level of n-GaAs has been studied in a far-infrared pump-probe experiment. The measurement has been carried out using a pulsed far-infrared molecular gas laser working at a wavelength of 292µm, with the sample in a magnetic field of 5.1 T, resonant with the 1s_o?2p^?1 transition. Two FIR pulses are sliced from one FIR-laser pulse by means of optical switching techniques using two Q-switched Nd:YAG lasers. The first pulse is used to saturate the transition, while the second pulse probes the return of the population in the excited state towards thermal equilibrium as a function of the time delay after the excitation pulse. The value of 350±50 ns found for the lifetime falls in line with CW saturation results on materials with other doping concentrations.     

Laminar flame theory. Part II

The laminar flame theory under the condition of minimum entropy production is presented. The equation of the temperature boundary layer is obtained for Le=0, and its general solution is found. It is shown that the mechanism of laminar flame propagation can be treated from the viewpoint of stationary thermal explosion in a cylindrical vessel of radius 2 as the critical regime in which the burnup is taken into account in an unusual form. Tomsk. Translated from Fizika Goreniya i Vzryva, Vol. 29, No. 5, pp. 22–30, September–October, 1993     

Irrigation Modelling in the Context of Basin Water Resources

Management practices for irrigation schemes can often be improved by modelling the behaviour of a scheme and by evaluating its efficiency statistics. However, looking at an irrigation scheme without regard for other water uses within the river basin may not be effective. Efficiencies computed in this way are local and, since water may be used many times within the same basin, may not be realistic. Changes in water uses (e.g. irrigation, industrial, power production, urban water supply, navigation, environmental, recreational) will often have effects on other uses; and changes in irrigation schemes (management,structural, crop pattern) may affect other users within the basin. In addition, all water users will be affected by external changes such as changes in land cover or in climate. As demand for water increases, these links become more important until, at some stage, there is insufficient water for all users and hard choices must be made. Hydrological modelling is a tool that can be used to relate irrigation schemes to the other water uses within a river basin and can help in assessing real productivities and in evaluating alternative patterns of water usage. This paper discusses the techniques available to simulate irrigation schemes within overall basin water resources using, as an example, an intensively utilized basin in western Turkey.     

Evaluation of the quality of compacting water-saturated sands by sounding

Various methods of sounding were investigated for evaluating the quality of compacting water-saturated fine and medium sands. A comparative analysis of the data obtained with the data of direct soil sampling was carried out. The given recommendations can be used when preparing the new edition of the building codes for engineering surveys for construction. Translated from Osnovaniya, Fundamenty i Mekhanika Gruntov, No. 4, pp. 17–20, July–August, 1994