裂齿矩形翅片板翅式换热器优化设计的分析

对裂齿矩形翅片板翅式换热器中的裂齿矩形翅片的传热效率作了分析,并以单位质量材耗的换热能力最大为目标函数,分析研究了在不同雷诺数(Re)的操作条件下裂齿矩形翅片间角度、翅片厚、长度、宽度及极厚之间的关系。结果表明:在气体换热的场合下,当Re在某一范围时翅片可有效地起到强化传热的作用。当板厚为5mm,翅片厚为3mm,翅片间夹角为45°～70°,Re为2×10~3～8×10~3,最佳翅片纵向间距与翅片长度和翅片厚度乘积的平方根的比为1.5～2.5,最佳翅片尺寸系数为3～5时,传热强化效果较好。     

井巷掘进控制斜形炮孔钻孔精度的试验研究

井巷掘进爆破工程中，工作面按设计要求，布置各种斜形炮孔，利用量角器和垂直尺控制钎杆与工作面夹角，使炮孔钻孔精度与设计炮孔角度基本上符合，在生产中取得了良好的爆破效果．     

非电量微机采集系统

实现水电厂电量快速微机巡回检测，温度采集较其它信号更为困难，本文着重讨论温度信号转换及与微机系统的连接。且介绍某水电厂微机控系统中非电量检测装置的硬件结构和软件编制。     

Role of macrophage overactivation in the development of acute pancreatic injury in rats

PURPOSE: To report quantitative changes in the anterior chamber configuration after small-incision cataract surgery with implantation of a posterior chamber intraocular lens by means of ultrasound biomicroscopy. METHODS: We examined the anterior chamber configuration of 20 eyes of 20 patients before and 3 months after small-incision cataract surgery (phacoemulsification and aspiration plus foldable intraocular lens implantation through a 3.0- to 4.0-mm self-sealing wound) by means of ultrasound biomicroscopy. The following variables were measured: the anterior chamber depth at the center of the cornea, the angle-opening distance 250 microns from the scleral spur (AOD250), the angle-opening distance 500 microns from the scleral spur (AOD500), and the trabecular-iris angle. RESULTS: The anterior chamber depth at the center of the cornea, AOD250, AOD500, and trabecular-iris angle increased significantly after surgery. The preoperative anterior chamber depth at the center of the cornea and trabecular-iris angle were negatively correlated with the differences between the postoperative and preoperative values (P < .01). The preoperative values of all variables examined were negatively correlated with the ratios of the postoperative value to the preoperative value (P < .002). CONCLUSIONS: The present results showed that small-incision cataract surgery significantly deepened the anterior chamber and widened its angle. The more shallow the preoperative anterior chamber was, the greater the postoperative change of the chamber was; and the more narrow the preoperative angle was, the greater the postoperative change of the angle was.     

Rat mature sympathetic neurones derive neurotrophin 3 from peripheral effector tissues

In a previous study we have demonstrated that endogenous neurotrophin 3 (NT3) is required for the survival of most sympathetic neurones in postnatal rats. However, the mechanisms underlying the action of NT3 on sympathetic neurones is not known. Neither is it understood whether NT3 is retrogradely transported from peripheral tissues or acts locally in an autocrine fashion. In the present study, NT3-mRNA was quantified in sympathetic effector tissues and NT3 protein was localized in intact and lesioned sympathetic nerves in rats. NT3-mRNA is expressed and developmentally regulated in many effector tissues including mesenteric arteries, salivary gland, heart and kidney but hardly detectable in the superior cervical ganglia of adult animals. The majority of sympathetic neurones express immunoreactivity for TrkA and TrkC in both neonatal and adult rats. Sympathetic somata are normally immunoreactive for NT3, but the immunoreactivity is abolished by systemic administration of NT3 antibodies or axotomy of postganglionic neurones, suggesting an accumulation of NT3 from extraneuronal sources. Furthermore, the detection of NT3-immunoreactivity in the internal carotid nerve as early as 3 h following a compression and only on the distal side indicates endogenous NT3 is retrogradely transported by sympathetic neurones. These studies provide evidence indicating that NT3, like nerve growth factor, is an effector tissue-derived neurotrophic factor for sympathetic neurones both during development and in the adult animal. Thus, we have provided a clear example that one type of neurone derives, through a retrograde transport mechanism, two neurotrophic factors simultaneously from its peripheral effector tissues.     

PVDF中空纤维滤膜的形态结构

用Ｌ－Ｓ相转换法制备了聚偏氟乙烯（ＰＶＤＦ）中空纤维不对称滤膜。铸膜液由聚合物、溶剂和添加剂组成。用电子显微镜（ＳＥＭ）考察了聚合物浓度、添加剂用量及种类对膜形态结构的影响。实验结果表明，聚合物浓度对膜形态结构有显著影响，当铸膜液中聚合物浓度较低时，无论用什么种类添加剂，都能形成大、且多的孔，但孔的形状随添加剂不同而异。当恒定聚合物浓度时，添加剂的用量对膜形态结构有很大的影响，但孔的大小及多少与添加剂含量的多少不成正比。     

潘庄引黄灌区泥沙处理对策探讨

潘庄引黄灌区在多年的引黄泥沙处理利用工作中,探索并总结出一套适合灌区特点的泥沙处理模式,取得了较好的效果。主要针对灌区引黄灌溉中的泥沙处理问题,在综述了灌区泥沙处理和利用的现状和新形势下传统泥沙处理方式所存在问题的基础上,从自然条件、工程条件等方面进行泥沙处理的探讨。