Photochromic Polymers Based on the Photoinduced Opening and Thermal Closing of [1,3]Oxazine Rings

Two macromolecular constructs incorporating a single polymer backbone with multiple photochromic side chains are developed. Both systems are prepared from preformed photochromic [1,3]oxazines after the ring‐opening polymerization of their norbornene appendages. In solution, UV illumination of these polymers opens the [1,3]oxazine rings in their side chains in less than 6 ns and with a quantum yield of 0.09 in both instances. The photogenerated species incorporate a 4‐nitrophenolate chromophore, and hence, their formation is accompanied by the appearance of an intense band in the visible region of the absorption spectrum. The photoproducts revert spontaneously to the original state with first‐order kinetics in microseconds. Furthermore, both photochromic polymers tolerate hundreds of switching cycles with no sign of degradation, even in the presence of molecular oxygen. Thus, this design logic and choice of functional building blocks can translate into the realization of innovative photoresponsive materials with excellent photochromic performance.     

Failure Analysis of a Location Axle in Tracked Tractor

In this study, a failure analysis was performed on the location axle (brace axle) of a blade on a tracked tractor used in agricultural areas. The analysis included evaluation of the macrostructure of the damage and the microstructure of the material, as well as a chemical analysis of the material. A commercial finite element method software package was used to determine the behavior of the location axle under the defined boundary conditions. After all the examination steps were completed, the main reason for the damage was determined to be manufacture and material error despite the presence of fatigue tracks in the damaged area. In addition, a heat treatment was carried out with the specimens taken from the damaged area and microstructure was re-examined. The experimental and simulation evaluation results provide a technical basis for suggestions to prevent future damage to the location axle.     

Thermodynamic analysis of the interaction between 3-aminophenylboronic acid and monosaccharides for development of biosensor

The special interaction between 3-aminophenylboronic acid and monosaccharides, particularly glucose, fructose and galactose, has been investigated and used for the development of electrochemical and surface plasmon resonance (SPR) based saccharide sensors. The binding constants and thermodynamic parameters of interaction such as free energy of binding (ΔG), enthalpy (ΔH) and entropy (ΔS) were determined for the first time using isothermal titration calorimetry revealed the enthalpic and entropic contributions to the free energies of binding. Effects of pH and buffer on the binding constants (k) between 3-aminophenylboronic acid and monosaccharides were also examined. The binding constant of fructose was found to be six times higher than glucose and four times higher than galactose at pH 11, leading the specific detection of fructose. SPR and potentiometric calibration for fructose were linear in the concentration range of 10–120 mM and 8–84 mM, respectively. Limit of detection of the SPR and potentiometric method were found to be as 8.9 mM and 1.4 mM, respectively.     

Integrity tests: Overlooked facts, resolved issues, and remaining questions.

Comments on W. J. Camara and D. L. Schneider's (see record 1994-23870-001) summary of reports on integrity tests (ITs). It is argued that in reviewing empirical findings about the validity of ITs, they overlooked critical findings regarding how well they work and what they measure. Also, their concerns regarding research on ITs conducted by test publishers are unfounded. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Effect of gamma irradiation on the properties of tyre cords

Gamma irradiation of high tenacity Nylon 6.6 (Ny 66) and polyester (PET) tyre cords was investigated. The untreated and treated tyre cords with different twist levels were irradiated at different dose rates in air. The effects of irradiation on both Ny 66 and PET cords were not found to be depending on the twist levels of the cords. The changes in the mechanical and thermal properties with absorbed dose at two different dose rates were measured. The mechanical properties were observed to deteriorate with increasing dose for Ny 66 cords, whereas remained almost unchanged for PET cords both in greige and dipped forms. Hot shrinkage value for the greige Ny 66 cords was found to be improved, i.e. decreased. This decrease was much lower for greige PET than Ny 66 cords. It is concluded that PET cord has higher radiation resistance than Ny 66 cord and the effects of high energy irradiation on tyre cords have to be taken into consideration during tyre design if pre-vulcanization with high energy radiation is to be applied.     

Characterization and elemental analysis of wood pellets obtained from low-valued types of wood

In this study, we compared the quality of wood pellets obtained from several different raw materials, i.e., Rhododendron ponticum (Type 1), Laurus nobilis (Type 2), and Castanea sativa (Type 3). The quality of the wood pellets was characterized mainly by their bulk density, moisture content, ash content, volatiles, sulfur content in the ash, total sulfur content, heating values, elemental analysis of the ash, and chlorine content. The results showed that bulk density was similar for each type of pellet. In quality values, ash content and the sulfur content in the ash were found to be lower for Type 3 (Chestnut wood pellets) than they were for the other two types. The results also showed that dry samples of Type 1, Type 2, and Type 3 wood pellets had heating values of 5057, 4691, and 4571 kcal/kg, respectively, whereas the original (undried) samples had heating values of 4571, 4409, and 4293 kcal/kg, respectively.     

Optimising clarification of carrot juice by bacterial crude pectinase

This study was undertaken to search for potential use of crude bacterial pectinase enzyme produced from Bacillus subtilis grown on hazelnut shell hydrolysate in clarification of carrot juice and to optimize the enzyme load, pH and time using the Box–Behnken response surface methodology (RSM). The carrot juice was treated with the crude pectinase enzyme (5.60 U mL^?1) at different concentrations (0.1–0.5%), pH (4–7), and time (2–6 h). The obtained enzyme was also compared with commercial fungal pectinase at identical conditions. RSM provided optimal clarification conditions of 0.5% (w/v) enzyme load, 7.0 pH, and 6 h of time estimating 100% clarity, whose experimental counterpart was 94.47 ± 0.01%. High values of coefficient of determination (R² = 0.9631), predicted R² (0.8989) and insignificant lack‐of‐fit (0.12) also showed that the model was successful in predicting % clarity for various combinations. This study also indicated that crude bacterial pectinase providing about 95% clarity is superior to commercial fungal pectinase, which gave 78% clarity under tested conditions, in terms of clarification ability for carrot juice.     

Effect of harvesting hour on some physical and mechanical properties of Rosa damascena Mill

BACKGROUND: Mechanization of Rosa damascena flower harvest is limited because of the asynchronous flowering period, the necessity for the harvest operation to take place in the early hour of the morning, and a lack of knowledge regarding the physical–mechanical properties of R. damascena. This study investigated the effect of harvesting hour on some physical–mechanical properties of R. damascena. RESULTS: The terminal velocity of the rose flower ranged from 4.00 to 2.38 m s^?1. The highest picking force was found to be 6.29 N for the harvesting hour of 06:00 am. Tear forces of petal changed from 1.54 to 0.97 N for the harvesting hour of 06:00 am and 12:00 pm, respectively. The tension force of pedicel varied between 8.25 and 7.76 N. The weight of the rose flower was measured as an average of 1.61 and 1.50 g at 06:00 am and 12:00 pm, respectively. Horizontal and vertical projection areas of rose flowers were positively correlated with harvesting hour, with an R² of 0.97 and 0.75, respectively. Results showed that there was a minor loss in colour for both inner and outer surfaces of petals. CONCLUSION: The results of physical–mechanical properties of R. damascena obtained from this study should be considered for the operation of flower harvest mechanization. Copyright © 2011 Society of Chemical Industry     

Role of social desirability in personality testing for personnel selection: The red herring.

Response bias continues to be the most frequently cited criticism of personality testing for personnel selection. The authors meta-analyzed the social desirability literature, examining whether social desirability functions as a predictor for a variety of criteria, as a suppressor, or as a mediator. Social desirability scales were found not to predict school success, task performance, counterproductive behaviors, and job performance. Correlations with the Big Five personality dimensions, cognitive ability, and years of education are presented along with empirical evidence that (a) social desirability is not as pervasive a problem as has been anticipated by industrial-organizational psychologists, (b) social desirability is in fact related to real individual differences in emotional stability and conscientiousness, and (c) social desirability does not function as a predictor, as a practically useful suppressor, or as a mediator variable for the criterion of job performance. Removing the effects of social desirability from the Big Five dimensions of personality leaves the criterion-related validity of personality constructs for predicting job performance intact. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Environmental optimization of chromium recovery from tannery sludge using a life cycle assessment approach

Life cycle assessment (LCA) was used to evaluate the environmental impact of an oxidative chromium recovery method from tannery sludge, in comparison with the usual landfilling process. Three improvement options (water reduction, byproduct use and anaerobic sludge digestion) were considered. The results showed that the proposed chromium recovery process would be better environmentally than conventional landfilling in all the evaluated impact categories if the amount of chromium recovered was 43 kg per ton of sludge. This amount could be recovered if the chromium concentration was about 20 times higher than that considered in this study. Alternatively, a lower chromium concentration would produce a better result if the recovery method was optimized and implemented at industrial rather than laboratory scale, and if more accurate data were provided on environmental credits for avoiding the chromium production process. Thus, the recovery method is environmentally beneficial when tannery sludge contains a chromium concentration of about 100,000 ppm. According to the literature, such concentrations are not unusual. The results could serve as the basis for further environmental improvements in chromium recovery and tannery sludge management and should be used in decision-making processes, especially for end-of-pipe treatments.