Polypyrrole materials doped with weakly coordinating anions: influence of substituents and the fate of the doping anion during the overoxidation process

The influence of weakly coordinating anions with different shapes and substituents has been studied to get the overoxidation resistance limit of the material, ORL. The anions utilized are derivatives of [Co(C₂B₉H₁₁)₂]⁻, [B₁₂H₁₂]²⁻ and [B₁₂H₁₁NH₃]⁻. The following tendencies have been established (1) boron cluster monoanions are to date the anions that offer the highest stability to overoxidation of PPy doped materials (2) the ORL stability of the material can not be attributed only to the shape of the cluster (3) monoanionic clusters are far superior than dianionic to get an ORL rise (4) cluster charge density reduction results in ORL rise as has been observed in [Co(C₂B₉H₁₁)₂]⁻ after incorporation of electron-withdrawing substituents with no electron back-donation (5) globular, rigid and large monoanions are less suitable for enhanced ORL values than elongated and non-rigid species (6) adequate anion's substitution produce a rise in the ORL of the material, thus polyether side-arms are beneficial with [Co(C₂B₉H₁₁)₂]⁻, whereas, T-shaped methylaryl groups are appealing in [B₁₂H₁₁NH₃]⁻ based materials, respectively, (7) substituents on the anions usually imply higher difficulty in the materials' growth. The high boron contents in these materials has permitted to learn on the fate of the doping anions during the overoxidation process. There is a built-up of the concentration of the doping anion in the electrolyte near surface area, whereas, a depletion is observed in the nearest inner layers.     

Statistische Sicherheit bei der Modalanalyse von Werkzeugmaschinen

Zusammenfassung Bei der experimentellen Modalanalyse von Maschinen führen Fehler der Frequenzgangmessung und die getroffenen Annahmen bei der Formulierung der elastomechanischen Gleichungen zu Abweichungen zwischen gemessenen und modellierten Frequenzg?ngen. Im vorliegenden Beitrag wird ein auf einer linearen Modellierung beruhendes Frequenzbereichsverfahren diskutiert, das eine Absch?tzung der statistischen Unsicherheiten der dynamischen Modellparameter Eigenfrequenz, D?mpfung und Schwingungsform erlaubt. Es wird gezeigt, da? bei der Relativerregung eine andere Gleichung für die Parametersch?tzung zu w?hlen ist, als bei der absoluten Erregung von Maschinen. Wird die Relativerregung im Modell nicht berücksichtigt, treten erhebliche Fehler bei Ermittlung der Schwingungsformen auf, die exemplarisch diskutiert werden. Der vorgestellte Bericht ist aus den Arbeiten des von der Deutschen Forschungsgemeinschaft (DFG) gef?rderten Sonderforschungsbereiches 121 „Ger?usch- und Schwingungsvorg?nge an Maschinen” hervorgegangen     

Einführung in Informationsmanagementsysteme (III): Praktische Umsetzung von Informationssicherheitsstandards

Zusammenfassung  Nachdem wir unser Augenmerk in den beiden ersten Teilen dieser Reihe auf die bestehenden Standards für Informationssicherheitsmanagementsysteme (ISMS), deren theoretische Grundlagen und die wichtigsten Unterschiede gerichtet hatten, m?chten wir diesmal zeigen, was bei der praktischen Implementierung zu beachten ist. Detlef Kilian ist Senior Consultant, Lehrbeauftragter für IT-Security an der FH Braunschweig/Wolfenbüttel und lizenzierter Auditor für ISO 27001 Audits auf Basis von IT-Grundschutz des Bundesamtes für Sicherheit in der Informationstechnik (BSI).     

Monolithic ZnTe-based pillar microcavities containing CdTe quantum dots

Micropillars of different diameters have been prepared by focused ion beam milling out of a planar ZnTe-based cavity. The monolithic epitaxial structure, deposited on a GaAs substrate, contains CdTe quantum dots embedded in a ZnTe λ-cavity delimited by two distributed Bragg reflectors (DBRs). The high refractive index material of the DBR structure is ZnTe, while for the low index material a short-period triple MgTe/ZnTe/MgSe superlattice is used. The CdTe quantum dots are formed by a novel Zn-induced formation process and are investigated by scanning transmission electron microscopy. Micro-photoluminescence measurements show discrete optical modes for the pillars, in good agreement with calculations based on a vectorial transfer matrix method. The measured quality factor reaches a value of 3100.     

Large‐scale Synthesis of Urchin‐like Mesoporous TiO2 Hollow Spheres by Targeted Etching and Their Photoelectrochemical Properties

A versatile targeted etching strategy is developed for the large‐scale synthesis of urchin‐like mesoporous TiO₂ hollow spheres (UMTHS) with tunable particle size. Its key feature is the use of a low‐temperature hydrothermal reaction of surface‐fluorinated, amorphous, hydrous TiO₂ solid spheres (AHTSS) under the protection of a polyvinylpyrrolidone (PVP) coating. With the confinement of PVP and water penetration, the highly porous AHTSS are selectively etched and hollowed by fluoride without destroying their spherical morphology. Meanwhile TiO₂ hydrates are gradually crystallized and their growth is preferentially along anatase (101) planes, reconstructing an urchin‐like shell consisting of numerous radially arranged single‐crystal anatase nanothorns. Complex hollow structures, such as core–shell and yolk–shell structures, can also be easily synthesized via additional protection of the interior by pre‐filling AHTSS with polyethylene glycol (PEG). The hollowing transformation is elucidated by the synergetic effect of etching, PVP coating, low hydrothermal reaction temperature, and the unique microstructure of AHTSS. The synthesized UMTHS with a large surface area of up to 128.6 m² g^‐1 show excellent light‐harvesting properties and present superior performances in photocatalytic removal of gaseous nitric oxide (NO) and photoelectrochemical solar energy conversion as photoanodes for dye‐sensitized mesoscopic solar cells.     

Removal of emerging contaminants of concern by alternative adsorbents

The effective removal of emerging contaminants of concern (ECCs) such as endocrine-disrupting chemicals, pharmaceutically active compounds, personal care products, and flame retardants is a desirable water treatment goal. In this study, one activated carbon, one carbonaceous resin, and two high-silica zeolites were studied to evaluate their effectiveness for the removal of an ECC mixture from lake water. Adsorption isotherm experiments were performed with a mixture of 28 ECCs at environmentally relevant concentrations (200–900 ng/L). Among the tested adsorbents, activated carbon was the most effective, and activated carbon doses typically used for taste and odor control in drinking water (<10 mg/L) were sufficient to achieve a 2-log removal for most of the tested ECCs. The carbonaceous resin was less effective than the activated carbon because this adsorbent had a smaller volume of pores in the size range required for the adsorption of many ECCs (6–9 Å). For the removal of ECC mixture constituents, zeolites were less effective than the carbonaceous adsorbents. Because zeolites contain pores of uniform size and shape, a few of the tested ECCs with matching pore size/shape requirements were well removed, but the adsorptive removal of others was negligible, even at zeolite doses of 100 mg/L. The results of this study demonstrate that effective adsorbents for the removal of a broad spectrum of ECCs from water should exhibit heterogeneity in pore size and shape and a large pore volume in the 6–9 Å size range.