SEHGAL不动点定理的改进

改进了Ｓｅｎｇａｌ不动点定理的条件．在新的条件下证明了Ｍｅｎｇｅｒ－ＰＭ空间的压缩映象不动点定理．     

超薄型金属氧化物／搪瓷复合辐射涂层蓄电池加热装置

为了解决战斗车辆在冬季使用中由于气温太低而造成蓄电池输出容量下降和充电困难问题,我们研制了一种超薄型红外线加温装置。该装置采用金属氧化物搪瓷复合涂料作为辐射层,具有发射率高、电一热转换效率高、抗腐蚀、不易脱落等特点。该加热装置体积小,重量轻,坚固实用,经3个冬季实车试验,效果令人满意。     

激光等离子体空间分辨XUV光谱技术

本文描述了环面镜-掠入射光栅谱仪系统获得激光等离子体空间分辨XUV光谱的原理,系统结构参数和实验结果,并讨论了这种环面镜技术和交叉狭缝技术各自的优缺点。     

制备软X光多层膜的转速控厚法

本文提出了一种新的监控软X光多层膜膜厚的方法——转速控厚法,利用这种方法镀制的设计周期厚度分别为8.4和10nm,周期数达50对和30对的W/C多层膜,经小角X光衍射测试,结果表明周期厚度随机误差在0.1nm左右。     

硅中硼离子注入校准样品的研制

本文主要介绍了硅中硼离子注入校准样品的制备与研究。分别用三台SIMS仪器对样品进行了深度剖析与比对,并对用作校准目的的样品主要参数进行了定值。     

离子束混合工艺对材料抗蚀性能的影响

本文介绍了离子束混合工艺方法。与直接注入相比较,离子束混合所使用的设备造价低1/4—1/2,而生产效率可提高1—2个数量级,因而使生产成本大幅度降低,这无疑对离子束工艺的实际应用将产生巨大的促进作用。 通过对轴承材料(GCr15和Cr4Mo4V)经Cr、N、Ta不同元素的混合处理后,在0.5M H_2SO_4和0.1M NaCl的缓冲溶液中的阳极极化曲线表明经混合处理后的两种材料试样,其抗蚀能力和抗点蚀能力均大大提高,这与直接注入的试样效果是一致的。 通过俄歇谱仪和透射电镜的分析结果表明混合是成功的,且在一定的条件下,形成非晶组织。 本文的结论是,无论是离子的直接注入还是离子束混合,对提高轴承材料的抗腐蚀性能都是有效的方法,特别是离子束混合技术具有更大的应用前景。     

A finite-element-boundary integral formulation for scattering bythree-dimensional cavity-backed apertures

A novel numerical technique is proposed for the electromagnetic characterization of the scattering by a three-dimensional cavity-backed aperture in an infinite ground plane. The technique combines the finite element and boundary integral methods to formulate a system of equations for the solution of the aperture fields and those inside the cavity. Specifically, the finite element method is used to formulate the fields in the cavity region, and the boundary integral approach is used in conjunction with the equivalence principle to represent the fields above the ground plane. Unlike traditional approaches, the proposed technique does not require a knowledge of the cavity's Green's function and is, therefore, applicable to arbitrary shape depressions and material fillings. Furthermore, the proposed formulation leads to a system having a partly full and partly sparse as well as symmetric and banded matrix which can be solved efficiently using special algorithms     

Molecular dynamics investigation on the morphology of HNIW affected by the growth condition

The crystal morphology of Hexanitrohexaazaisowurtzitane (HNIW) in vacuum and ethyl acetate was investigated by attachment energy (AE) model through molecular dynamics (MD). The simulated solvent-affected outcome agrees well with the experimental crystal habit cultivated from ethyl acetate. The influence of model size on the modified AE was discussed, and a reasonable model size was obtained. The model size can be broadened to calculate the morphology of other compounds. The radial distribution function (RDF) analyses and diffusion coefficient analyses were performed to explore the adsorption and diffusion behaviors of ethyl acetate molecules on HNIW surfaces. The simulation results can provide some guidance for the further crystallization process of HNIW.     

湍流两相流内弹道模型

采用双流体两相流模型,推导有粘的两相流内弹道基本方程,并且建立了两相相互作用的气固两相湍流数学模型。