Anti-GBM glomerulonephritis in mice lacking nitric oxide synthase type 2

To determine the relationship between quantitative Doppler parameters of portal, hepatic, and splanchnic circulation and hepatic venous pressure gradient (HVPG), variceal size, and Child-Pugh class in patients with alcoholic cirrhosis, we studied forty patients with proved alcoholic cirrhosis who underwent Doppler ultrasonography, hepatic vein catheterization, and esophagoscopy. The following Doppler parameters were recorded: time-averaged mean blood velocity, volume flow of the main portal vein flow, and resistance index (RI) of the hepatic and of the superior mesenteric artery. Doppler findings were compared with HVPG, presence and size of esophageal varices, and Child-Pugh class. There was a significant inverse correlation between portal velocity and HVPG (r = -.69), as well as between portal vein flow and HVPG (r = -.58). No correlation was found between RI in the hepatic artery or superior mesenteric artery and HVPG. No correlation was found between portal vein measurements and presence and size of varices. Severe liver failure was associated with lower portal velocity and flow. In patients with alcoholic cirrhosis, only portal vein blood velocity and flow, but neither hepatic nor mesenteric artery RI, are correlated to the severity of portal hypertension and to the severity of liver failure.     

Solving partial differential equations of gas–solid reactions by orthogonal collocation

In this work the solution of the coupled partial differential equations for noncatalytic gas–solid reactions has been considered by orthogonal collocation. First of all, by an integral transformation and then by applying the orthogonal collocation method, these partial differential equations are converted to the ordinary differential equations. Then the equations are solved and the conversion–time profiles are obtained. The solution of the equations for volume reaction model, grain model and grain model with product layer resistance, modified grain model, random pore model, nucleation model and reaction of two gas with one solid has been presented in this work. The orthogonal collocation is a rapid method for solving of these equations and shows a good accuracy with respect to other solution techniques in the literature.     

Preformed particle gels of sulfonated polyacrylamide: preparation,characterization, and application as permeability modifier

In this study, a preformed particle gel (PPG) was synthesized from sulfonated polyacrylamide and chromium metal cross-linker with specific concentration. The main characteristics of PPG, such as gelation time, gel fraction, swelling properties and salt sensitivity factor were investigated. The gel fraction of 94.1% practically indicated an appropriate conversion of gelant to the gel. The equilibrium swelling ratios of particle gels in distilled water and formation water at 80 °C were 470.49 and 12.61, respectively. Additionally, the rheological properties of gel were studied by a dynamic rheometer. The ultimate storage modulus of gel was measured 35.4 kPa. The linear viscoelastic behavior was observed at strain between 1 and 82.6% and gel structure was stable up to strain of 1120% with small reduction of storage modulus. The kinetics of gelation were also studied at different temperatures and tested against Avrami equation to determine the kinetic parameters. The Avrami exponents for two kinetic steps were about 2.29 and 0.80, respectively, indicating the rapid formation of the gel network at first step due to nucleation and two-dimensional growths of gel nuclei. Furthermore, a core flooding experiment was conducted to study PPG performance in porous media. The residual resistance factor of water and oil was 41.58 and 12.91, respectively. A value of 3.22 for the ratio of these two factors indicated the ability of the synthesized PPG to decrease water-effective permeability compared to oil-effective permeability in porous media.

     

Novel CPG algorithm for tracking fast sudden changes based on tangent rule

ABSTRACT

This paper proposes a novel tracking method to deal with fast changes of solar irradiation and power limit change in order to increase tracking efficiency. This goal is achieved by estimating (i) next operating mode and (ii) next step point with the use of tangent rule in triangle. After every fast response to sudden changes, accurate response phase starts in order to track desired power in each operating mode by adaptive step size. Drift problem in defining next operating mode is eliminated in proposed method by estimating next operating mode, and settling time is decreased to about 25 percent of settling time of other methods by estimating next step point. Simulation and experimental results show the performance of proposed method.     

Preparation of Electrolytic Quasi-Solid-State Nanofibers for Dye-Sensitized Solar Cells

JOM - Nanofibers were prepared from a poly(acrylonitrile-co-vinyl acetate) [P(AN-co-VAC)]/polyvinylidene fluoride (PVDF) blend and used as a quasi-solid (QS) electrolyte for dye-sensitized solar...     

The impact of alphabet size on pattern complexity of maxmin-$$\omega$$ω cellular automata

Natural Computing - We present an analysis of an additive cellular automaton (CA) under asynchronous dynamics. The asynchronous scheme is maxmin-$$\omega$$, a deterministic system, introduced in...     

Numerical thermal analysis of nanofluid flow through the cooling channels of a polymer electrolyte membrane fuel cell filled with metal foam

Improvement in the cooling system performance by making the temperature distribution uniform is an essential part in design of polymer electrolyte membrane fuel cells. In this paper, we proposed to use water-CuO nanofluid as the coolant fluid and to fill the flow field in the cooling plates of the fuel cell stack by metal foam. We numerically investigated the effect of using nanofluid at different porosities, pore sizes, and thicknesses of metal foam, on the thermal performance of polymer electrolyte membrane fuel cell. The accuracy of present computations is increased by applying a three-dimensional modeling based on finite-volume method, a variable thermal heat flux as the thermal boundary condition, and a two-phase approach to obtain the distribution of nanoparticles volume fraction. The obtained results indicated that at low Reynolds numbers, the role of nanoparticles in improvement of temperature uniformity is more dominant. Moreover, metal foam can reduce the maximum temperature for about 16.5 K and make the temperature distribution uniform in the cooling channel, whereas increase in the pressure drop is not considerable.