Microstructure of Interfacial Region Between Cold-Sprayed Copper Coating and AlN Substrate Coated with Sputtered Titanium and Copper

Cold spraying has been developed as a high-quality coating technique. In this article, copper is deposited on an AlN substrate coated by the sputtering of titanium and copper at a low pressure of less than 1.0 MPa, making this approach suitable for a wide range of engineering applications. In order to understand the adhesion mechanism at the atomic scale, the interfacial regions are carefully observed in thin foil samples from the cross sections of the specimens with a HREM. We find a unique wavy boundary between the sputtered titanium and the sputtered copper. It is assumed that the shear-instability phenomenon occurs due to the cold-spraying process and influences the adhesive strength. Furthermore, the cold-sprayed copper particles are connected directly without any oxidation layer due to the appearance of new metallic surfaces during the impact process. The TEM data clearly reveal the phenomena and mechanisms related to the impact of powder sprayed on the substrate.     

Correlation for boiling heat transfer of R-134a in horizontal tubes including effect of tube diameter

A Chen-type correlation for flow boiling heat transfer of R-134a in horizontal tubes was modified taking into account the effect of tube diameter. The effect of tube diameter on flow boiling heat transfer coefficient was characterized by the Weber number in gas phase. Results showed that this correlation could be applied to a wide range of tube diameters (0.5–11-mm-ID). In addition, the dryout point and the heat transfer characteristics after the dryout point were also investigated based on the annular flow model. The proposed experimental expressions to predict both the dryout quality and the post-dryout heat transfer coefficient could also be applied to a wide range of tube diameter (0.5–11-mm-ID).     

Boiling heat transfer of HFO-1234yf flowing in a smooth small-diameter horizontal tube

The flow boiling heat transfer coefficient of the low-GWP (global warming potential) refrigerant HFO-1234yf inside a smooth small-diameter horizontal tube (inner diameter: 2 mm) was experimentally investigated. The local heat transfer coefficient was measured at heat fluxes of 6-24 kW m⁻², mass fluxes of 100-400 kg m⁻² s⁻¹, an evaporating temperature of 288.15 K, and an inlet vapor quality of 0-0.25. The results show that the effect of heat flux on the heat transfer was large at low vapor quality, while the effect of mass flux was large at high vapor quality. The heat transfer coefficient of HFO-1234yf was almost the same as that of R-134a. The heat transfer coefficients calculated based on correlations with Saitoh et al. agreed well with the measured values compared to other correlations. The measured pressure drop agreed well with that predicted by the Lockhart-Martinelli correlation.     

Photoinduced piezooptical changes caused by microsecond CO2 Infrared lasers in lead-germanate rare earth tridoped glasses

We have observed substantial influence of the illumination by 3.5 μs CO₂ laser on the piezooptical coefficients of 59 PbO - 41 GeO₂ (in wt.%) glasses prepared with Tm₂O₃, Er₂O₃, Yb₂O₃ using the following concentrations (in wt.%): B-Tm₂O₃ (0.5)/Yb₂O₃ (1.0)/Er₂O₃(0.5); C-Tm₂O₃(0.5)/Yb₂O₃(1.0)/Er₂O₃ O(1.0); D-Tm₂O₃ (0.5)/Yb₂O₃ (1.0)/Er ₂O₃ (2.0). We have found that the maximal changes were observed for B samples that contain the lowest concentration of Er₂O₃. The maximal changes are observed around 360 nm near the fundamental absorption edge. There exists some correlation between the maximal intensities of the photoluminescence and the maximal piezooptical changes. The CO₂ lasers cause preliminary photothermal changes. The existence of the maxima may be caused by a competition between the phonon and anharmonic phonon subsystems, which are very sensitive to the temperature.     

Modulation of nanotube formation in apatite single crystal via organic molecule incorporation

Hydroxyapatite materials are potentially useful for biomedical application, especially as vehicles for functional molecules. Structural control of bulk apatite materials, such as in the fabrication of hollow microspheres or porous structures, has been studied for this purpose. However, control of the internal structure of the source apatite crystal itself is still a challenge. Here, we show that small organic molecules incorporated in apatite crystals act as porogens which control the porous structure of apatite single crystal. The presence of amino acid under apatite synthesis conditions leads to firm bindings and encapsulation of the amino acid in apatite single crystals. Amino acid elimination by heating or electron beam irradiation enhances the pore formation in apatite single crystal. Moreover, incorporation of an acidic amino acid in apatite induces peapod like nanotubes in apatite single crystals. This study suggests the potential of using small organics for nano-structural control of apatite single crystals which would be valuable for enhancing drug loadings or modulating material digestion in vivo.     

Nanometer resolution stress measurement of the Si gate using illumination-collection-type scanning near-field Raman spectroscopy with a completely metal-inside-coated pyramidal probe

We have proposed an illumination-collection-type scanning near-field Raman spectroscopy (SNRS) with a completely gold metal-inside-coated (MIC) pyramidal probe without an optical aperture in order to detect the Raman spectra of fine Si devices for local stress measurements. The gold MIC pyramidal probe has been studied to act as a plasmon resonance near-field optical probe with high power using a finite differential time domain (FDTD) simulation and the prototyped SNRS. In the simulation, the propagated optical power can be made available for SNRS. In the experiments, it is clear that the prototyped SNRS enhanced the Si Raman peak signal by plasmon resonance and could measure the Si Raman peak shift by line scanning the Si gate region and the Si active layer. Furthermore, compressive and tensile stresses localized around the Si gate were demonstrated by the Si Raman peak shift with a resolution of about 10 nm. It is clarified that the proposed SNRS has the possibility of detecting the Raman spectra of a local area.     

Aspects of dSpace in contemporary design

Computer dependent design space is illustrated with the recent international competition project for Kowloon Arts Center. The spatial condition of design resulted from the deployment of Euclidian geometry and use of the nonrational, complex surfaces. Another aspect of computer dependent space was rooted in the contemporary work situation where architects located on the three different continents collaborated in distributed mode over the internet. The resulting project confirms the creative potential of the above aspects of the digital space in contemporary design.     

Enzyme-modified organic conducting salt microelectrode.

A miniaturized enzyme-modified electrode has been constructed and evaluated. The tip of a capillary-encased, carbon-fiber electrode is recessed, and tetrathiafulvalene-tetracyanoquinodimethane crystals are electrochemically deposited in the recessed tip. Flavoenzymes are placed in the recess by cross-linking with glutaraldehyde. The specific enzymes used are glucose oxidase to form a microbiosensor for glucose, and a combination of acetylcholine esterase and choline oxidase to form a microbiosensor for acetylcholine. The sensor is operated in an amperometric mode with Eapp = 150 mV versus a sodium saturated calomel electrode, and the response appears to be limited by the kinetics of the enzyme reaction. The effective maximum current density for the glucose electrode is greater than 600 microA/cm2. At low concentrations of glucose, oxygen provides a significant interference by attenuating the signal. The device is simple to prepare and has a rapid response time. Interference from ascorbate has been significantly reduced by the design and by addition of a layer of ascorbate oxidase. Although not yet suitable for use in tissue, the biosensors are suitable for detection in situations where oxygen concentrations do not frequently change.     

Anionic polymerization of methyl methacrylate in the presence of chromium carbonyl [Cr(CO)6]

Summary The presence of Cr(CO)₆ in nBuLi-initiated anionic polymerization of methyl methacrylates (MMA) was found to effectively enhance stereoselectivity of the polymerization in toluene at 0°C. nBuLi/Cr(CO)₆ afforded an isotactic PMMA with 86 % of mm triad, and the polymers obtained with nBuLi/Cr(CO)₆/tBuOK were rich in heterotactic structures (mr = ca. 54%). In both cases, the selectivity was improved in ca. 10% compared to those of the polymerization conducted under the similar conditions without Cr(CO)₆. Received: 20 January 2003/Revised version: 21 April 2003/Accepted: 21 April 2003 Correspondence to Eiji Ihara