Electrochemical oxidation of ethylene glycol on Pt-based catalysts in alkaline solutions and quantitative analysis of intermediate products

Electrocatalytic activities of Pt/C, Pt-Ru/C, and Pt-Ni/C for the oxidation of ethylene glycol in a basic solution are evaluated by cyclic voltammetry and quasi-steady state polarization. Based on the results of Tafel slopes from quasi-steady state polarization, the catalytic activities for ethylene glycol oxidation are in the order of Pt-Ru/C > Pt-Ni/C > Pt/C. The analysis of intermediate products for ethylene glycol oxidation by higher performance liquid chromatograph (HPLC) demonstrates that the degree of ethylene glycol oxidation is dependent on catalysts. Pt-Ru/C shows the highest current densities for ethylene glycol oxidation, but shows lower fuel utilization. On the other hand, Pt-Ni/C shows higher ability to cleavage C–C bonds, but is suffered from catalyst poisoning. To improve the tolerance for catalyst poisoning, we construct a novel Pt-Ni-SnO₂/C catalyst, compare its catalytic activities, and evaluate the intermediates. Pt-Ni-SnO₂/C shows superior catalytic activities for ethylene glycol oxidation, resulting in the highest degree of complete electro-oxidation of ethylene glycol to CO₂.     

Capillary rise properties of porous mullite ceramics prepared by an extrusion method using organic fibers as the pore former

Porous mullite ceramics with unidirectionally oriented pores were prepared by an extrusion method to investigate their capillary rise properties. Rayon fibers 16.5 μm in diameter and 800 μm long were used as the pore formers by kneading with alumina powder, kaolin clay, China earthen clay and binder with varying Fe₂O₃ contents of 0, 5 and 7 mass%. The resulting pastes were extruded into cylindrical tubes (outer diameter (OD) 30–50 mm and inner diameter (ID) 20–30 mm), dried at room temperature and fired at 1500 °C for 4 h. The bulk densities of the resulting porous ceramics ranged from 1.31 to 1.67 g/cm³, with apparent porosities of 43.2–59.3%. The pore size distributions measured by Hg porosimetry showed a sharp peak at 10.0 μm in the sample without Fe₂O₃ and at 15.6 μm in the samples containing Fe₂O₃; these pores, which arose from the burnt-out rayon fibers, corresponded to total pore volumes ranging from 0.24 to 0.34 ml/g. SEM showed a microstructure consisting of unidirectionally oriented pores in a porous mullite matrix. Prismatic mullite crystals were well developed on the surfaces of the pore walls owing to the liquid phase formed by the Fe₂O₃ component added to color the samples. The bending strengths of the tubular samples ranged from 15.6 to 26.3 MPa. The height of capillary rise, measured under controlled relative humidities (RH) of 50, 65 and 85%, was greater in the ceramics containing Fe₂O₃ than in those without Fe₂O₃, especially in the thinner samples. The maximum capillary rise reached about 1300 mm, much higher than previously reported. This excellent capillary rise ability is thought to be due to the controlled pore size, pore distribution and pore orientation in these porous mullite ceramics.     

A high-density rice genetic linkage map with 2275 markers using a single F2 population

A 2275-marker genetic map of rice (Oryza sativa L.) covering 1521.6 cM in the Kosambi function has been constructed using 186 F2 plants from a single cross between the japonica variety Nipponbare and the indica variety Kasalath. The map provides the most detailed and informative genetic map of any plant. Centromere locations on 12 linkage groups were determined by dosage analysis of secondary and telotrisomics using > 130 DNA markers located on respective chromosome arms. A limited influence on meiotic recombination inhibition by the centromere in the genetic map was discussed. The main sources of the markers in this map were expressed sequence tag (EST) clones from Nipponbare callus, root, and shoot libraries. We mapped 1455 loci using ESTs; 615 of these loci showed significant similarities to known genes, including single-copy genes, family genes, and isozyme genes. The high-resolution genetic map permitted us to characterize meiotic recombinations in the whole genome. Positive interference of meiotic recombination was detected both by the distribution of recombination number per each chromosome and by the distribution of double crossover interval lengths.     

Deformation Theory of Dynamic Link Matching

Dynamic link matching is a self&hyphenorganizing topographic mapping between a template image and a data image. The mapping tends to be continuous, linking two points sharing similar local features, which, as a result, can lead to its deformation to some degree. In analyzing such deformation mathematically, we reduced the model equation to a phase equation, which enabled us to clarify the principles of the deformation process and the relationship between high&hyphendimensional models and low&hyphendimensional ones. We also elucidated the characteristics of the model in the context of the standard regularization theory.     

Pial arteriovenous malformation with massive perinidal edema

The dental, clinical, radiological, pedigree and dermatoglyphic findings of a patient showing hypoplasia of enamel and intrinsic staining of the teeth from erythroblastosis fetalis are presented.     

Self-expanding nitinol stents for treatment of bilateral main bronchial stenosis caused by esophageal cancer]

A 68-year-old man was admitted because of dyspnea. Nine months earlier, he had undergone radiotherapy for esophageal carcinoma. Chest CT scan obtained on admission showed a tumor shadow behind the tracheal carina. Bronchoscopy revealed that the lower trachea and bilateral main bronchi were compressed from the back and narrowed by the esophageal cancer. To maintain the airway, under fluoroscopic and guide-wire control, a self-expanding nitinol stent (SENS, Accuflex, Microvasive) was implanted in the lower trachea and left main bronchus. At the same time, other SENS was similarly implanted in the lower trachea and right main bronchus. During the implantation, the left nitinol stent was connected to the side of the right nitinol stent to form a T-shape. There was little sputum at the joint portion of the stents and the ventilation of both lungs remained adequate. Severe dyspnea markedly improved after placement of two nitinol stents. Knitted SENS is made of a nickel titanium alloy. SENS was formulated for use in the management of biliary obstruction. However, it is highly flexible and easy to implant. So, it is suitable for the treatment of airway obstruction. Although the implantation of SENS in extensive tracheobronchial stenosis has not previously been reported, it should be useful for prevention of airway obstruction.     

Metaiodobenzylguanidine and heart rate variability in heart failure

It is assumed that the low-frequency power (LF) of heart rate variability (HRV) increases with progress of congestive heart failure (CHF), therefore positively correlating with cardiac 123I-metaiodobenzylguanidine (MIBG) washout. It is demonstrated here that HRV, including normalized LF, correlated inversely with MIBG washout and positively with the ratio of heart-to-mediastinum MIBG activity in controls and CHF patients, whereas these correlations were not observed within CHF patients. Thus MIBG washout may increase and HRV including normalized LF may decrease with CHF, although the HRV and MIBG measures may not similarly change in proportion to the severity of the cardiac autonomic dysfunction in CHF.     

Changes in stable isotopes, lignin-derived phenols, and fossil pigments in sediments of Lake Biwa, Japan: implications for anthropogenic effects over the last 100 years

We measured stable nitrogen (N) and carbon (C) isotope ratios, lignin-derived phenols, and fossil pigments in sediments of known ages to elucidate the historical changes in the ecosystem status of Lake Biwa, Japan, over the last 100 years. Stable N isotope ratios and algal pigments in the sediments increased rapidly from the early 1960s to the 1980s, and then remained relatively constant, indicating that eutrophication occurred in the early 1960s but ceased in the 1980s. Stable C isotope ratios of the sediment increased from the 1960s, but decreased after the 1980s to the present. This decrease in stable C isotope ratios after the 1980s could not be explained by annual changes in either terrestrial input or algal production. However, when the C isotope ratios were corrected for the Suess effect, the shift to more negative isotopic value in atmospheric CO(2) by fossil fuel burning, the isotopic value showed a trend, which is consistent with the other biomarkers and the monitoring data. The trend was also mirrored by the relative abundance of lignin-derived phenols, a unique organic tracer of material that originated from terrestrial plants, which decreased in the early 1960s and recovered to some degree in the 1980s. We detected no notable difference in the composition of lignin phenols, suggesting that the terrestrial plant composition did not change markedly. However, we found that lignin accumulation rate increased around the 1980s. These results suggest that although eutrophication has stabilized since the 1980s, allochthonous organic matter input has changed in Lake Biwa over the past 25 years.     

Adsorptive Recovery of Palladium(II) and Platinum(IV) on the Chemically Modified-Microalgal Residue

A biomass waste of microalgae was chemically modified by immobilizing the functional group of polyethyleneimine to prepare a new type of adsorbent. The adsorption test revealed that this adsorbent exhibited remarkably high selectivity for Pd(II) and Pt(IV) over base metal ions in HCl solution. From the adsorption isotherm, its maximum adsorption capacity for Pd(II) and Pt(IV) was evaluated as 2.0 and 0.8 mmol/g, respectively. This adsorbent also exhibited high affinity and selectivity for Pd(II) and Pt(IV) even in the presence of high concentrations of base metals in actual leach liquor.