Single-carrier-type dominated impact ionisation in multilayer structures

A new structure for III-V avalanche photodetectors in which multiplication is dominated by a single-carrier type is proposed. Calculations for a GaAs-AlGaAs detector are reported predicting multiplication dominated by electrons. The reason for this is that electrons are injected into GaAs multiplication layers from high-electric-field AlGaAs layers, while holes are injected into the GaAs layers from low-electric-field AlGaAs layers.     

Growth and properties of Hg1-x Cdx Te epitaxial layers

The growth of epitaxial layers of mercury-cadmium-telluride (Hg_1-xCd_xTe) with relatively low x (0.2-0.3) from Te-rich solutions in an open tube sliding system is studied. The development of a semiclosed slider system with unique features permits the growth of low x material at atmospheric pressure. The quality of the films is improved by the use of Cd_1-yZ_yTe and Hg_1-xCd_xTe substrates instead of CdTe. The substrate effects and the growth procedure are discussed and a solidus line at a relatively low temperature is reported. The asgrown epitaxial layers are p-type with hole concentration of the order of 1·10¹⁷ cm⁻³, hole mobility of about 300 cm²·V⁻¹ sec⁻¹ and excess minority carrier life-time of 3 nsec, at 77 K.     

Decision making and personality in traffic offenders: a study of Israeli drivers

Traffic offences present danger to the offender, and to others. This study examines differences in decision making and personality between traffic offenders and non-offenders. Fifty-one traffic offenders participating in penalty courses were compared to a control group of 36 drivers who were not penalized for traffic offences in the 5 years prior to the study. All participants performed the Iowa Gambling Task (IGT), a popular decision task employed for assessing cognitive impulsivity, and completed the "big five" personality questionnaire. The results showed that traffic offenders made fewer advantageous choices on the IGT; and an analysis with a formal cognitive model, the Expectancy Valance model, suggests that this results from offenders' high weighting of gains compared to losses. An examination of personality factors reveals that traffic offenders were more extraverted. The predictive power of IGT performance was comparable to that of the personality factor. These results demonstrate that the IGT can be useful for studying individual differences in risk taking in a real-world task, and combined with the EV model, identify the sources of these differences.     

Detection of gaseous plumes in IR hyperspectral images using hierarchical clustering

The emergence of IR hyperspectral sensors in recent years enables their use in remote environmental monitoring of gaseous plumes. IR hyperspectral imaging combines the unique advantages of traditional remote sensing methods such as multispectral imagery and nonimaging Fourier transform infrared spectroscopy, while eliminating their drawbacks. The most significant improvement introduced by hyperspectral technology is the capability of standoff detection and discrimination of effluent gaseous plumes without need for a clear reference background or any other temporal information. We introduce a novel approach for detection and discrimination of gaseous plumes in IR hyperspectral imagery using a divisive hierarchical clustering algorithm. The utility of the suggested detection algorithm is demonstrated on IR hyperspectral images of the release of two atmospheric tracers. The application of the proposed detection method on the experimental data has yielded a correct identification of all the releases without any false alarms. These encouraging results show that the presented approach can be used as a basis for a complete identification algorithm for gaseous pollutants in IR hyperspectral imagery without the need for a clear background.     

Self-assembled lamellar MoS2, SnS2 and SiO2 semiconducting polymer nanocomposites

Lamellar nanocomposites based on semiconducting polymers incorporated into layered inorganic matrices are prepared by the co-assembly of organic and inorganic precursors. Semiconducting polymer-incorporated silica is prepared by introducing the semiconducting polymers into a tetrahydrofuran (THF)/water homogeneous sol solution containing silica precursor species and a surface-active agent. Semiconducting polymer-incorporated MoS(2) and SnS(2) are prepared by Li intercalation into the inorganic compound, exfoliation and restack in the presence of the semiconducting polymer. All lamellar nanocomposite films are organized in domains aligned parallel to the substrate surface plane. The incorporated polymers maintain their semiconducting properties, as evident from their optical absorption and photoluminescence spectra. The optoelectronic properties of the nanocomposites depend on the properties of both the inorganic host and the incorporated guest polymer as demonstrated by integrating the nanocomposite films into light-emitting diodes. Devices based on polymer-incorporated silica and polymer-incorporated MoS(2) show no diode behaviour and no light emission due to the insulating and metallic properties of the silica and MoS(2) hosts. In contrast, diode performance and electroluminescence are obtained from devices based on semiconducting polymer-incorporated semiconducting SnS(2), demonstrating that judicious selection of the composite components in combination with the optimization of material synthesis conditions allows new hierarchical structures to be tailored for electronic and optoelectronic applications.     

Reducing the formation of glucose degradation products in peritoneal dialysis solutions by ultrahigh temperature ohmic heating

Peritoneal dialysis (PD) is commonly performed by using preprepared dialysis solutions containing glucose, which are thermally treated to achieve commercial sterilization. A series of glucose degradation products (GDPs) are being formed, which react with the tissue during the dialysis procedure, thus baring a negative effect on the patient and the dialysis process. The present study tested the efficacy of ohmic heating as an alternative thermal treatment for continuous sterilization of PD solutions. The process was compared to conventional retort treatment, and GDPs accumulation was measured. Thermal treatments using the ohmic heating system were performed at three temperatures (105, 125, and 150 degrees C) with residence time at each temperature ranging from 0.84 to 12.0 s. The resulting concentrations of glyoxal (GO), methylglyoxal (MGO), and 3-deoxyglucosone (3-DG) in the PD solutions were measured. None of these GDPs were found in PD fluids treated by ohmic heating at 105 degrees C. The concentration of 3-DG, after a standard sterilization treatment (121 degrees C, 20 or 40 min) was one order of magnitude higher (approximately 140 and 242 microM) than after ohmic heating treatment at 125 degrees C. The results of the present study suggest that this technique can be used to produce solutions with much lower content of GDPs. It also demonstrates the advantage of using the ohmic heating technology as a tool for high temperature short time treatment of PD fluids.     

Fate of antibiotics in activated sludge followed by ultrafiltration (CAS-UF) and in a membrane bioreactor (MBR)

The fates of several macrolide, sulphonamide, and trimethoprim antibiotics contained in the raw sewage of the Tel-Aviv wastewater treatment plant (WWTP) were investigated after the sewage was treated using either a full-scale conventional activated sludge (CAS) system coupled with a subsequent ultrafiltration (UF) step or a pilot membrane bioreactor (MBR) system. Antibiotics removal in the MBR system, once it achieved stable operation, was 15-42% higher than that of the CAS system. This advantage was reduced to a maximum of 20% when a UF was added to the CAS. It was hypothesized that the contribution of membrane separation (in both systems) to antibiotics removal was due either to sorption to biomass (rather than improvement in biodegradation) or to enmeshment in the membrane biofilm (since UF membrane pores are significantly larger than the contaminant molecules). Batch experiments with MBR biomass showed a markedly high potential for sorption of the tested antibiotics onto the biomass. Moreover, methanol extraction of MBR biomass released significant amounts of sorbed antibiotics. This finding implies that more attention must be devoted to the management of excess sludge.     

Single‐Plasmid‐Based System for Efficient Noncanonical Amino Acid Mutagenesis in Cultured Mammalian Cells

We describe a new expression system for efficient non‐canonical amino acid mutagenesis in cultured mammalian cells by using the pyrrolysine tRNA synthetase/tRNA_CUA^Pyl pair. A significant improvement in the incorporation of non‐canonical amino acids into proteins was obtained by combining all the required genetic components into a single and compact vector that can be efficiently delivered to different mammalian cell lines by conventional transfection reagents.     

New Process for Recovery of Zinc Sulfate and Sulfuric Acid from Zinc Electrowinning Bleed Solutions

Acid-base couple extractants extract sulfuric acid and zinc sulfate efficiently, selectively and reversibly. Their properties allowed development of a new, solvent extraction process for treating zinc electrowinning waste streams. In this process, about 95% of the sulfuric acid and 95% of the zinc can be recovered at concentrations high enough to be directly recycled to zinc production. Lime consumption and gypsum formation are substantially reduced. Only one extractant is used in the process, and zinc is recovered as zinc sulfate.     

Vertical cavity lasers for telecom applications

The authors review the development of long-wavelength vertical cavity lasers (VCLs) for telecommunications applications. Long-wavelength VCLs provide an attractive choice for inexpensive fiber optic communication. The different designs of such lasers are presented, along with the advantages and disadvantages of each. System requirements and experiments are also presented at 2.5 Gb/s over 200 km of optical fiber