Voltage-time characteristics for steep-front impulse voltages ofparticle-contaminated spacers in SF6 gas-insulated switchgear

The voltage-time characteristics of spacer surfaces for steep-front impulse waves are investigated under a particle-contaminated condition in SF₆ gas. The characteristics are measured as a function of particle length, particle position, and space shapes. Flashover voltages monotonically increase in the submicrosecond region as time to flashover is shorter, and are a minimum in the 1 μs region. Applicability of the equal voltage-time area criterion for estimating the voltage-time characteristics is discussed and the estimation is clarified. Moreover, it is demonstrated that an optimized spacer with ribs greatly improves flashover voltages in the submicrosecond region as well as in the 1 μs and power frequency region     

Screening demand-side management programs with a value-based test

A value-based test is presented for economic screening of electric utility demand-side management (DSM) programs. The widely used least cost test is valid if the programs do not alter the amount or value of energy services provided to customers. But, in general, DSM programs have such effects and, as a result, the value consumers receive is changed. A more general economic efficiency test, the most value test, provides a practical method for considering the effects of DSM on customer value. The version presented allows for multiple load periods and can account for rate impacts on several customer classes. Four typical DSM programs are evaluated as illustrations     

Efficacy and pharmacokinetics of gallopamil in patients with coronary artery disease

We prospectively studied 10 patients with stable exertional ischaemia, selected from a larger group of patients referred for suspected coronary artery disease or to detect residual ischaemia after myocardial infarction, to evaluate pharmacokinetic changes during chronic treatment with gallopamil and its correlation with clinical efficacy in patients with coronary artery disease. Our study consisted of a 1-week run-in single-blind placebo treatment and a 4-week single-blind gallopamil treatment. At the end of the run-in period patients underwent two different exercise tests, the first 2 hours and the second 7 hours after placebo administration. During active treatment all patients underwent two different exercise tests, the first 2 hours and the second 7 hours after gallopamil (50 mg) administration on the 1st and 28th days of gallopamil therapy. On the same days in eight of the patients we evaluated gallopamil pharmacokinetic changes. Our data revealed a rapid increase of unchanged gallopamil and its metabolite (norgallopamil) in the plasma, and a peak concentration of these substances about 2 hour after oral administration on both the 1st and 28th day of observation. Moreover, our results demonstrated an increase between the first and 28th day of treatment in peak concentration of unchanged gallopamil in the plasma, and of AUC 0-infinity and AUC o-c values during chronic treatment with gallopamil. Our clinical data showed an improvement in exercise results during gallopamil therapy related to increased concentration of the drug.     

ON THE GLOBAL AND LOCAL STRUCTURAL PROPERTIES OF PACKED BEDS OF NONEQUILATERAL CYLINDRICAL PARTICLES

The structure of a series of packed beds of non-equilateral cylindrical particles has been investigated and compared with those of beds of spheres and equilateral cylinders of similar dimensions. It is found that the mean voidage of beds of equilateral cylinders is consistently lower than the corresponding values for beds of spheres and non-equilateral cylinders of aspect ratios 0.25, 0.5, 2 and 3. End effects do not appear to be present in beds of cylinders of aspect ratios of 0.25 and 0.5 and generally, both wall and end effects are significantly weaker than corresponding effects in beds of spheres and equilateral cylinders. This suggests that chanelling is reduced in beds of non-equilateral cylindrical pellets. Whilst the axial voidage distribution of beds of non-equilateral cylinders appears to be almost uniform, the radial voidage distribution bears the effect of confining walls and an oscillatory profile is observed in most cases, but is seen to be irregular for aspect ratios 0.25 and 0.5. The orientation effect of particles of aspect ratio 0.25 in adjacent layers causes an irregular pattern in the axially averaged radial voidage distribution. Observed axially averaged radial voidage profiles suggest that a uniform structure may be achieved by modifying the basic cylindrical shape.     

Cutoff frequencies and noise power law model of spectral density:adaptation of the multivariance method for irregularly spaced timingdata using the lowest-mode estimator approach

The concept of structure functions, which is an extension of the variance approach, is useful to determine the variance (the structure function) which is optimized for a type of noise and for an order of drift. The multivariance method was developed to use different variances over the same signal. It is then possible to select a set of variances in which each variance is optimized to the determination of one parameter (of one noise level, drift, or cutoff frequency). Recently, we adapted this method to irregularly spaced timing data. In this connection, we replaced the structure functions by another method of spectral density estimation: the lowest-mode estimator, introduced by J.E. Deeter and P.E. Boynton (1982, 1984) for the analysis of pulsar timing data. Different lowest-mode estimators can be constructed according to two priorities: the order of drifts that must be removed and the type of noise for which the sensitivity must be maximum. Thus, a multivariance system is developed using a set of different estimators. The details of this method are described, and the results for different signals are discussed in this paper     

Some factors affecting the electrical properties of carbon-black-loaded butyl rubber during vulcanization

Butyl rubber mixtures loaded with 70 phr general purpose furnace black (GPF) and tetramethyl thiuram disulphide (TMTD)/S as vulcanizing system were prepared. The kinetics of their electrical conductivity development during the vulcanization process were followed by using an especially devised system. It was found that the increase in the electrical conductivity during vulcanization obeys an exponential growth function with time constant τ, which markedly decreases with increasing vulcanization temperature as well as with the efficiency of the vulcanizing system. After completion of the vulcanization process, about 80 min, the samples obtained possess reasonable stability and reproducibility of electrical conductivity.     

Mathematical analysis of dynamic channel selection in indoor mobilewireless communication systems

Dynamic channel selection (DCS) is an algorithm for flexible resource sharing in mobile radio systems. The digital enhanced cordless telecommunications (DECT) standard implements a version of DCS based on time as well as frequency multiplexing. In this paper, mathematical models are developed to evaluate the probabilities of channel availability, desired carrier power, and the carrier-to-interference ratio (CIR) for a constant traffic load. These results can be used to compute the call setup blocking probability. The models reported in this study are based on a decentralized DCS according to the DECT standard specifications. The results show that blocking due to availability of a channel (resource blocking), not interference blocking, generally is the most important factor in overall call blocking. Furthermore, it is seen that resource blocking is sensitive to the implementation of portable sets. Also, with homogeneous static traffic, this type of DCS ran be as good as fixed channel allocation (FCA) with respect to resource blocking