锚注支护技术在修复巷道中的应用

新庄孜煤矿在总结各类支护型式优缺点的基础上 ,大力推广应用锚注支护技术 ,先后在修复高应力软岩冒落架棚巷道、修复砌碹巷道、修复大断面峒室等施工中灵活使用锚注支护技术 ,均取得良好的支护效果和显著的技术经济效益     

巴彦浩特探区钻井液技术初探

巴彦浩特探区钻井液工艺技术的重点是，解决疏松砂砾岩地层水涌漏同层、侏罗系地层水的HCO3^-污染及可能出现的火成岩地层井塌复杂。结合内蒙古巴彦浩特探区地层和井身结构特点，采用了两性聚合物／氯化钾钻井液和氯化钾／石膏-聚磺钻井液体系。该体系抑制能力强，性能稳定．容易实现低固相、低密度近平衡钻井，保护储层效果好。对复杂情况采取了有针对性的处理办法：平稳操作和合理的钻井工程措施是预防水层涌漏同层和火成岩井塌复杂的重要手段；用井场易得的固井水泥或石膏配合烧碱处理HCO3^-污染简便易行；处理火成岩井塌复杂，控制合适的钻井液性能是必要的。     

静压下ZnS：Te中Te等电子陷阱的发光

研究了4块ZnS：Te薄膜样品(Te组分从0．5％到3．1％)的光致发光谱在常压下的温度特性．对于Te组分较小的2块样品观察到2个发光峰，分别来自Te1和Te2等电子陷阱；而对Te组分较大的2块样品则只观察到1个来自Te2等电子陷阱的发光．我们还研究了这些发光峰在低温1．5K下的流体静压压力行为．观察到与Te1有关的发光峰压力系数比ZnS带边的要大很多，而与Te2有关的发光峰压力系数则比带边小．根据Koster-Slater模型，价带态密度半宽随压力的增加是Te1中心有较大压力系数的主要原因，而Te1和Te2中心的不同压力行为则是由于压力对两者缺陷势增强的不同效果引起的．     

利用煤化工艺设备对洗油深加工

利用工业萘生产装置 ,在工业萘生产的空余时间 ,对洗油进行深加工 ,制取工业萘及甲基萘等产品 ,实现一套装置的多种使用 ,提高企业经济效益     

利用预曝光技术制备复合结构光纤光栅传感器

报道利用预曝光技术制备的复合结构光纤光栅传感器。提出利用预曝光技术使某一小段光纤的折射率变大,而后在预曝光部分和未曝光部分的交接处一次性写入光栅,即可得到具有两个透射峰的透射谱。实验研究了该复合结构光纤光栅在温度和应力传感上的应用。实验结果表明,利用该复合结构光纤光栅可以实现温度与应变的同时测量。     

基于FPGA+POWERPC(VIRTEX-II PRO)的雷达数字伺服控制系统

VIRTEX IIPRO是美国Xilinx公司最新一代的FPGA产品,内嵌了IBM的POWERPC405,它的功能十分强大、扩展性能优越,在工业和军用设备中有着很好的应用前景。本文对该芯片的特点进行了简单介绍,并介绍了一种基于FPGA+PPC为核心的雷达数字伺服控制系统。     

低渗透油田套管损坏机理分析及防治措施

在注水开发油田,油水井套管损坏是一种极为普遍的现象,但又各具特点.通过对鄯善油田套管损坏井的自身特点进行统计、归纳,深入分析低渗透砂岩油藏套管变形影响因素和作用机理,提出了套管损坏井的预防及相应治理措施.     

关于气井产能、气田稳产特征和气区开采潜力的探讨

根据气田开发特点和国内外开发实践，对气田平均产能评价方法、开发速度与稳产的关系以及气区开采潜力等问题进行了探讨，以提高开发评价、开发建设及投资决策的科学性与可靠性，达到高效开发和稳定供气的目的。分析评价了国内外常用的6种气井产能评价方法，指出了其适用条件。利用中国、土库曼斯坦和俄罗斯部分开发历史较长的气田开发实例分析了开发速度与稳产的关系，结果表明四川裂缝系统稳产情况最好，而土库曼斯坦气田稳产关系最差。利用俄罗斯已枯竭老气区、正在开发的大型主力气区以及中国四川开采历史较长气区的开发实例，对气区开采潜力进行综合分析和探讨，认为在预测气田（或气区）的开发潜力、稳定供气水平和年限时，要全面评价、预计尚未探明储量的规模、质量、投产时间、投产顺序以及储量的可信度和可靠性，以降低开发决策的风险，提高中、长期开发规划的科学性。图5表2参10     

Novel algorithms for shared segment protection

The major challenges in designing survivable schemes are how to allocate a minimal amount of spare resources (e.g., bandwidth) using fast (e.g., polynomial-time) algorithms, and, in case a failure occurs, to be able to recover quickly from it. All existing approaches invariably make tradeoffs. We propose novel shared segment protection algorithms which make little or no compromise . We develop an elegant integer linear programming (ILP) model to determine an optimal set of segments to protect a given active path. Although the ILP approach is useful for a medium-size network, it is too time consuming for large networks. Accordingly, we also design a fast heuristic algorithm based on dynamic programming to obtain a near-optimal set of segments. Although the heuristic algorithm has a polynomial time complexity, it can achieve a bandwidth efficiency as high as some best-performing shared path protection schemes and, at the same time, much faster recovery than these shared path protection schemes. The proposed scheme is also applicable to a wide range of networking technologies, including Internet Protocol and wavelength-division multiplexing networks under the generalized multiprotocol label switched framework.     

Achieving fast and bandwidth-efficient shared-path protection

Dynamic provisioning of restorable bandwidth guaranteed paths is a challenge in the design of broad-band transport networks, especially next-generation optical networks. A common approach is called (failure-independent) path protection, whereby for every mission-critical active path to be established, a link (or node) disjoint backup path (BP) is also established. To optimize network resource utilization, shared path protection should be adopted, which often allows a new BP to share the bandwidth allocated to some existing BPs. However, it usually leads the backup paths to use too many links, with zero cost in term of additional backup bandwidth, along its route. It will violate the restoration time guarantee. In this paper, we propose novel integer linear programming (ILP) formulations by introducing two parameters (/spl epsi/ and /spl mu/) in both the sharing with complete information (SCI) scheme and the distributed partial information management (DPIM) scheme. Our results show that the proposed ILP formulations can not only improve the network resource utilization effectively, but also keep the BPs as short as possible.