泛型直线螺线管型电磁阀运动分析和改进的电压控制

在直线螺线管型高速电磁阀的整个运动过程中，由于铁磁材料的磁化需要一个动态过程，导致其电磁吸力随着铁磁材料的磁化而变化。为了获得一种不依赖电磁阀材料各异性的最优电压控制方法，从静态磁场出发，由电磁阀的理论静态吸力公式建立电磁阀衔铁的动力学模型，通过分析电磁阀的衔铁启动过程，上升运动过程和下落过程，得到各阶段的位移、电流随时间的变化。然后经过前面过程分析得到了采用两段梯形电压控制电磁阀的控制策略，实现了精准控制占空比的目的。     

基于儿童使用主体的建成环境评价尺度研究

评价尺度是建筑使用后评价的基 本问题之一，它是使用者评判建成环境好 坏、优劣的重要测度标准。为弥补目前环境 评价尺度研究方面的缺失，建立与儿童使用 主体相一致的建成环境评价尺度，对儿童常 用语义量词进行汇总和筛选，采用五级线 分刻度方法进行问卷调查研究。基于儿童的 理解，通过问卷试验分析，结果表明：双侧 5级区间评价尺度为：很（负面）；有点（负 面）；中等；有点（正面）；很（正面）；单侧 5级区间评价尺度为：不；好像有点；比较； 很；特别。     

Spreading and Curing Behaviors of a Thermosetting Droplet-Silicone on a Heated Surface

Thermosetting materials are widely used as encapsulation in the electrical packaging to protect the core electronic components from external force, moisture, dust, and other factors. However, the spreading and curing behaviors of such kind of fluid on a heated surface have been rarely explored. In this study, we experimentally and numerically investigated the spreading and curing behaviors of the silicone(OE6550 A/B, which is widely used in the light-emitting diode packaging) droplet with diameter of ～2.2 mm on a heated surface with temperature ranging from 25 ℃ to 250 ℃. For the experiments, we established a setup with high-speed camera and heating unit to capture the fast spreading process of the silicone droplet on the heated surface. For the numerical simulation, we built a viscosity model of the silicone by using the Kiuna's model and combined the viscosity model with the Volume of Fluid(VOF) model by the User Defined Function(UDF) method. The results show that the surface temperature significantly affected the spreading behaviors of the silicone droplet since it determines the temperature and viscosity distribution inside the droplet. For surface temperature varied from 25 ℃ to 250 ℃, the final contact radius changed from ～2.95 mm to ～1.78 mm and the total spreading time changed from ～511 s to ～0.15 s. By further analyzing the viscosity evolution of the droplet, we found that the decreasing of the total spreading time was caused by the decrease of the viscosity under high surface temperature at initial spreading stage, while the reduction of the final contact radius was caused by the curing of the precursor film. This study supplies a strategy to tuning the spreading and curing behavior of silicone by imposing high surface temperature, which is of great importance to the electronic packaging.     

紫色马铃薯酒发酵工艺优化及主发酵期花青素与色泽的动态变化

以紫色马铃薯为原料，在单因素的基础上，通过响应面法对紫色马铃薯酒的发酵工艺参数进行优化。最佳发酵工艺参数为:马铃薯与面粉比1:0.6、料水比1:1 (g/mL)、α-淀粉酶添加量8.5 U/g、酒曲添加量0.45%。此工艺在28 ℃下发酵14 d，得到的紫色马铃薯酒酒精度13.5%vol，花青素含量166.34 mg/mL，酒体澄清透明呈紫红色，酸甜适中，有独特酒香，综合感官评定得分90分。测定主发酵期花青素和色泽的动态变化，分析表明，紫色马铃薯酒在发酵过程中花青素呈现先上升后下降的趋势，色度呈现先下降后趋于平缓的趋势，色调则与之相反。聚合色度和褐变指数总体均呈现逐渐上升的趋势。试验结果为工业化生产紫色马铃薯酒提供理论依据。     

严寒地区室内多层贯通空间热湿环境实测研究

通过对严寒地区贯通空间温湿度在水平方向及垂直方向上的连续实测，分析了供暖前后，太阳辐射、建筑开口、供暖等因素对贯通空间热湿环境的影响有很大差异。结果表明供暖前贯通空间受到太阳辐射、建筑开口的影响较大，温湿度波动明显；供暖期间受供暖因素影响，温差波动不稳定但幅度小。水平方向上非供暖期最大温差为2℃，供暖期最大温差为8℃；垂直方向上非供暖期的最大温差为3℃，供暖期最大温差为7℃。     

基于小波变换的分数阶微分算法在肝脏肿瘤CT图像纹理增强中的应用

图像纹理增强过程中容易丢失平滑区域纹理细节，而分数阶微分增强虽然能够非线性保留平滑区域纹理细节，但对频率分辨率敏感。针对这个问题，提出一种基于小波变换的分数阶微分纹理增强算法，应用于平扫计算机断层扫描（CT）图像的肝脏肿瘤区域的纹理增强。首先，通过小波变换将图像感兴趣区分解成多个子带分量；其次，基于分数阶微分定义构造一个带补偿参数的分数阶微分掩膜；最后，使用该掩膜与每个高频子带分量进行卷积并利用小波逆变换重组图像感兴趣区。实验结果表明，该方法在使用较大分数阶次显著增强肿瘤区域的高频轮廓信息的同时，有效地保留了低频平滑的纹理细节：增强后的肝细胞癌区域与原区域相比，信息熵平均增加36.56%，平均梯度平均增加321.56%，平均绝对差值平均为9.287；增强后的肝血管瘤区域与原区域相比，信息熵平均增加48.77%，平均梯度平均增加511.26%，平均绝对差值平均为14.097。     

冷链条件下气调包装酱卤鸭肉制品货架期预测模型的建立

目的 以气调包装酱卤鸭肉制品为研究对象,在冷链温度范围内建立一套准确、高效的货架期预测模型。方法 利用选择性培养基测定不同温度下产品各微生物数量,确定4~25℃条件下产品优势腐败菌。对乳酸菌数量与感官评定值进行了回归分析确定最小腐败量Ns。分别采用修正的Gompertz方程和平方根方程建立一、二级模型,并通过预测值与实测值对比验证模型的可靠性。结果 确定了4~25℃条件下产品优势腐败菌为乳酸菌,最小腐败量Ns=6.14(lg(cfu /g))。一、二级模型拟合度均良好,三种温度下模型预测值与实际值间的差异均在30％左右,波动幅度在10%以内。结论 实现了对4~25℃内任何时间点产品剩余货架期的预测,为冷链条件下气调包装酱卤鸭肉制品品质的变化提供了理论指导。     

Chromium evaporation and oxidation characteristics of alumina-forming austenitic stainless steels for balance of plant applications in solid oxide fuel cells

The chromium (Cr) evaporation behavior of several different types of iron (Fe)-based AFA alloys and benchmark Cr₂O₃-forming Fe-based 310 and Ni-based 625 alloys was investigated for 500 h exposures at 800 °C to 900 °C in air with 10% H₂O. The Cr evaporation rates from alumina-forming austenitic (AFA) alloys were ~5 to 35 times lower than that of the Cr₂O₃-forming alloys depending on alloy and temperature. The Cr evaporation behavior was correlated with extensive characterization of the chemistry and microstructure of the oxide scales, which also revealed a degree of quartz tube Si contamination during the test. Long-term oxidation kinetics were also assessed at 800 to 1000 °C for up to 10,000 h in air with 10% H₂O to provide further guidance for SOFC BOP component alloy selection.