Volumetric three‐dimensional up‐conversion display medium

Abstract— Several rare‐earth‐doped fluoride crystals that are excited to emit visible light by sequential two‐photon absorption have been investigated as display‐medium candidates for static volumetric three‐dimensional displays. Dispersion of powders of these materials in a refractive‐index‐matched polymer is reported because such a medium may result in a scalable display. The scattering problem in such a medium is greatly reduced by index‐matching the polymer to the crystalline particles. An index‐matching condition that optimizes the performance is identified.     

Reducing Algorithm Complexity for Computing an Aggregate Uncertainty Measure

In the theory of evidence, two kinds of uncertainty coexist, nonspecificity and discord. An aggregate uncertainty (AU) measure has been defined to include these two kinds of uncertainty, in an aggregate fashion. Meyerowitz et al. proposed an algorithm for calculating AU and validated its practical usage. Although this algorithm was proven to be absolutely correct by Klir and Wierman, in some cases, it remains too complex. In fact, when the cardinality of the frame of discernment is very large, it can be impossible to calculate AU. Therefore, based on Klir's and Harmanec's seminal work, we give some justifications for restricting the computation of AU(Bel) to the core of the corresponding belief function, and we also propose an algorithm to calculate AU(Bel), the F-algorithm, which reduces the computational complexity of the original algorithm of Meyerowitz et al. We prove that this algorithm gives the same results as Meyerowitz's algorithm, and we outline conditions under which it reduces the computational complexity significantly. Moreover, we illustrate the use of the F-algorithm in computing AU in a practical scenario of target identification.     

Microstructural Modelling of Nb Microalloyed Steels during Thin Slab Direct Rolling Processing

The microstructural evolution during the hot rolling of coarse grain sized austenite has been modeled considering all the microstructural mechanisms (dynamic, static and metadynamic recrystallization, strain induced precipitation) that can take place during an industrial TSDR production of three Nb microalloyed steels. Based on the results obtained from the model, processing maps have been drawn for 0.02%, 0.035% and 0.05% Nb microalloyed steels. Optimum processing conditions to exploit all the benefits of the Nb microalloying have been defined considering a final gauge thickness range between 1.5 and 12.65 mm. In addition, and facing the difficulties present in the production of thick hot strip, several alternative thermomechanical schedules are proposed, which would originate microstructures with a suitable combination of homogeneity and retained strain prior to transformation.     

煤气管道膨胀节腐蚀和在线包焊技术应用

简单分析了高炉煤气中Cl元素的存在对不锈钢膨胀节的应力腐蚀问题和防止途径，作为一种临时性的防范措施，简要介绍了煤气膨胀节包焊实施步骤和措施。     

Handling degenerate cases in exact geodesic computation on triangle meshes

The computation of exact geodesics on triangle meshes is a widely used operation in computer-aided design and computer graphics. Practical algorithms for computing such exact geodesics have been recently proposed by Surazhsky et al. [5]. By applying these geometric algorithms to real-world data, degenerate cases frequently appear. In this paper we classify and enumerate all the degenerate cases in a systematic way. Based on the classification, we present solutions to handle all the degenerate cases consistently and correctly. The common users may find the present techniques useful when they implement a robust code of computing exact geodesic paths on meshes.     

WZ—C系列密封阀结构分析与改进

对W Z-C系列无料钟高炉炉顶布料设备上、下密封阀在涟钢3#高炉的使用情况进行了论述,分析了故障产生的机理,对密封阀的结构进行了改造并取得了相当可观的经济效益。     

The Transformation of Carbides during Austenization and Its Effect on the Wear Resistance of High Speed Steel Rolls

The transformation of carbides with austenization time of a high speed steel (HSS) roll material, manufactured by a centrifugal casting method, has been studied. The correlation between wear resistance and the type, morphology, volume fraction, and distribution of the carbides has also been investigated. Microstructural observations, X-ray diffraction (XRD) analysis, hardness measurements, and energy dispersive spectroscopy (EDS) have been used to characterize the carbides. The type and volume fraction of carbides were found to change with austenizing time. During austenization, the transformation of the M₃C carbides can be postulated as M₃C + γ-Fe → M₂C, with much finer nodular and rodlike MC carbides also forming through a solid-state transformation. The M₂C carbide decomposes as M₂C + γ-Fe → MC + M₇C₃ + M₆C. The decomposed carbide substantially maintains a platelike shape until the end of decomposition. The most important finding of this study is that austenization results in changes in the type, morphology, volume fraction, and distribution of carbides and that it can be controlled to produced a homogeneous distribution of hard carbides, resulting in an improvement in the wear resistance of HSS rolls. This finding may be of great use for the industrial production of HSS rolls.     

The Growth of a Single Cell/Dendrite in a Directional Solidification Process

Following the original model for a single cell/dendrite growth by Hunt,[5] systematic numerical simulations are carried out with focus on cell shape evolution and tip radius selection in a directional solidification process conducted in a capillary tube. Computations indicate that the anisotropy of solid/liquid interfacial energy and the diameter of a capillary tube have significant influences on the selection of a tip shape. The anisotropy in dilute SCN-salol alloys has been determined through the equilibrium droplet shape method and its value is 1.09 pct. The calculated cell/dendrite shapes with this value of anisotropy agree with experimental observations where a single cell/dendrite of SCN-salol alloys grows in a capillary tube.     

中小城镇住宅消防设施现状及建设管理探索

通过对西部某小城市的住宅消防设施建设和管理现状的调查 ,反映了占西部绝大部分城市面积的中小城镇的住宅消防设施十分令人担忧的现状 ,分析了造成这一现状的原因 ,提出了解决这一问题的建设管理思路     

The Geography of Opportunity and Unemployment: An Integrated Model of Residential Segregation and Spatial Mismatch

Abstract: This article combines the neighborhood effects and spatial mismatch frameworks into a single model explaining how geographic factors contribute to unemployment. Using National Longitudinal Survey of Youth (1979) data, I estimate a two‐step model that separately models the effects of segregation and spatial mismatch. The first model predicts educational attainment as a function of exposure to residential segregation as a youth. The second model predicts unemployment probability as an adult as a function of educational attainment and spatial mismatch. The empirical results show that segregation does have discernable effects on educational attainment for blacks, but not for whites. I also find that spatial mismatch affects unemployment probability for blacks, but such an effect is hardly present for whites. A partial equilibrium analysis using predictions from the models shows that large changes in either segregation levels or the central city/suburban distribution of the black population would yield only moderate decreases in unemployment probability for the black population overall. Yet despite small predicted effects, these results should be viewed with caution because the general equilibrium effects of a large scale movement of blacks and whites across metropolitan space are largely impossible to predict with current data.