All-optical 6- and 8-channel demultiplexers based on photonic crystal multilayer ring resonators in Si/C rods

In this paper, we employed multilayer ring resonators in a silicon rod base structure to realize 6-channel and 8-channel demultiplexers based on two-dimensional photonic crystals. Both the main rings and basic structures are composed of silicon rods, and the interior rings of the multilayer rings are composed of carbon. Employing silicon and carbon rods of different radii in multilayer ring resonators enhanced the coupling efficiency between the rings and waveguides. The average quality factor and power transmission efficiency were 4320 and 93%, respectively. Crosstalk values from \(-11\) to ?46 dB in conjunction with the mentioned characteristics suggest the use of the device for optical communication applications. The compact size of the proposed structure and the materials used make the proposed demultiplexer suitable for optical integrated circuits.     

Design and fabrication of a high-efficiency extreme-ultraviolet binary phase-only computer-generated hologram

As the development of extreme-ultraviolet (EUV) lithography progresses, interest grows in the extension of traditional optical components to the EUV regime. The strong absorption of EUV by most materials and its extremely short wavelength, however, make it very difficult to implement many components that are commonplace in the longer wavelength regimes. One such component is the diffractive optical element used, for example, in illumination systems to efficiently generate modified pupil fills. The fabrication and characterization of an EUV binary phase-only computer-generated hologram is demonstrated, allowing arbitrary far-field diffraction patterns to be generated. Based on reflective architecture, the fabricated device is extremely efficient. Based on an identically fabricated null hologram, the absolute efficiency into one diffracted order of 22% has been demonstrated. In the case where axially symmetric diffraction patterns are desired (both positive and negative diffraction orders can be used), the efficiency can be twice as high.     

A hybrid discontinuous spectral element method and filtered mass density function solver for turbulent reacting flows

Abstract

We present a novel hybrid scheme for the large eddy simulation (LES) of turbulent reacting flows. The scheme couples the discontinuous spectral element method (DSEM) solver for the unsteady compressible Navier-Stokes equations with a Monte Carlo particle filtered mass density function (FMDF) solver for the transport of reacting species. The method is capable of high-order simulations on unstructured grids. Mean particle estimate construction mimics the DSEM numerical procedure and utilizes variable basis functions. The scheme is tested on non-reacting and reacting Taylor-Green vortex flows. Studies of varying polynomial order, different basis functions for constructing particle estimates, and varying particle quantities are conducted. We demonstrate that a tent kernel, in conjunction with high polynomial order, produces the most accurate results. The chemically reacting simulations validate the hybrid scheme and demonstrate its applicability across a range of reaction regimes. The hybrid scheme's computational cost is 2.1 times the DSEM-LES solver.     

Polymerization of Triazolinediones with trans-3,3-Dichloro-1-phenyl-1-propene

The reaction of 4-phenyl-1,2,4-triazoline-3,5-dione (PhTD) ( 2 ) with trans-3,3-dichloro-1-phenyl-1-propene ( 4 ) was investigated at room and reflux temperatures in methylene chloride solution. Although the reaction is slow, it gives quantitative yield. This reaction leads to the formation of two 2:1 adducts via double Diels–Alder and Diels–Alder-Ene reactions in a ratio of about 1: 7. The major product was isolated by means of fractional crystallization as a pure compound and was characterized by infra-red (IR), ¹H nuclear magnetic resonance (NMR), ¹³C NMR, mass spectra and elemental analysis. The structure of the minor product was determined by IR and ¹H NMR. These compounds were used as models for the polymerization reactions. The reaction of bistriazolinediones (1,6-bis-(3,5-dioxo-1,2,4-triazoline-4-yl)hexane and bis-(p-3,5-dioxo-1,2,4-triazoline-4-ylphenyl)methane) with ( 4 ) was carried out in dimethylformamide (DMF). The reactions gave novel polymers via repetitive double Diels–Alder and Diels–Alder-Ene polyaddition reactions, with the major component being a Diels–Alder-Ene structure. These polymers have intrinsic viscosities in a range from 0·08 to 0·18dlg^-1 in DMF. The physical properties and structural characterization of these polymers have been studied and are reported. © of SCI.     

Numerical simulation of steady natural convection heat transfer in a 3-dimensional single-ended tube subjected to a nanofluid

In this paper, 3-dimensional numerical simulation of steady natural convective flow and heat transfer are studied in a single-ended tube with non-uniform heat input. Apart from some other applications, it serves as a simplified model of the single-ended evacuated solar tube of a water-in-glass evacuated tube solar water heater. It is assumed that the sealed end of tube to be adiabatic and also the tube opening to be subjected to copper–water nanofluid. Governing equations are derived based on the conceptual model in the cylindrical coordinate system. The governing equations have been then approximated by means of a fully implicit finite volume control method (FVM), using SIMPLE algorithm on the collocated arrangement. The study has been carried out for solid volume fraction 0 ≤ φ ≤ 0.05 and maximum heat flux 100 ≤ q_m ≤ 700. Considering that the driven flow in the tube is influenced by the dimensions and the inclination angle of the solar tube, the flow patterns and temperature distributions are presented on different cross sectional planes and longitudinal sections, when the tube is positioned at different orientations.     

Dissimilar Joining of Pure Copper to Aluminum Alloy via Friction Stir Welding

In this study, the dissimilar friction stir welding(FSW) butt joints between aluminum alloy 5754-H114 and commercially pure copper were investigated. The thickness of welded plates was 4 mm and the aluminum plate was placed on the advancing side. In order to obtain a suitable flow and a better material mixing, a 1-mm offset was considered for the aluminum plate, toward the butt centerline. For investigating the microstructure and mechanical properties of FSWed joints, optical microscopy and mechanical tests(i.e., uniaxial tensile test and microhardness) were used, respectively.Furthermore, the analysis of intermetallic compounds and fracture surface was examined by scanning electron microscopy and X-ray diffraction. The effect of heat generation on the mechanical properties and microstructure of the FSWed joints was investigated. The results showed that there is an optimum amount of heat input. The intermetallic compounds formed in FSWed joints were Al4Cu9 and Al2Cu. The best results were found in joints with 1000 rpm rotational speed and100 mm/min travel speed. The tensile strength was found as 219 MPa, which reached 84% of the aluminum base strength.Moreover, maximum value of the microhardness of the stir zone(SZ) was attained as about 120 HV, which was greatly depended on the grain size, intermetallic compounds and copper pieces in SZ.     

New moment-rotation equation for welded steel beam-to-column connections

A three-parameter tangent inverse equation is generically proposed for the non-linear moment-rotation (M-θ) relationship of semi-rigid steel beam-to-column connections. The parameters are the initial stiffness, the plastic stiffness, and a reference moment. Two commonly used welded moment connections are picked up for moment-rotation calculation and comparison between the results of the proposed model and those of a detailed nonlinear finite elements modeling. Semi-analytical equations are proposed for calculating the parameters containing basic factors affecting behavior of the connections. The coefficients of the equations are computed based on a data bank developed in this study using the finite element method. A large number of finite elements models covering the whole range of common dimensions of the above connections are analyzed. Accuracy of the finite element model is verified on the basis of the available test results from previous studies. Tensile tests for determination of material properties of weld to be used in the modeling are conducted. Comparison between the results of the semi-analytical equations and the finite element models shows that the proposed model is able to estimate the moment-rotation curves of the welded beam-to-column connections with very good accuracy.     

Modeling-based optimization of a fixed-bed industrial reactor for oxidative dehydrogenation of propane

An industrial scale propylene production via oxidative dehydrogenation of propane(ODHP)in multi-tubular reactors was modeled.Multi-tubular fixed-bed reactor used for ODHP process,employing 10000 of small diameter tubes immersed in a shell through a proper coolant flows.Herein,a theory-based pseudo-homogeneous model to describe the operation of a fixed bed reactor for the ODHP to correspondence ole fin over V_2O_5/γ-Al_2O_3catalyst was presented.Steady state one dimensional model has been developed to identify the operation parameters and to describe the propane and oxygen conversions,gas process and coolant temperatures,as well as other parameters affecting the reactor performance such as pressure.Furthermore,the applied model showed that a double-bed multitubular reactor with intermediate air injection scheme was superior to a single-bed design due to the increasing of propylene selectivity while operating under lower oxygen partial pressures resulting in propane conversion of about 37.3%.The optimized length of the reactor needed to reach 100%conversion of the oxygen was theoretically determined.For the single-bed reactor the optimized length of 11.96 m including 0.5m of inert section at the entrance region and for the double-bed reactor design the optimized lengths of 5.72m for the first and 7.32 m for the second reactor were calculated.Ultimately,the use of a distributed oxygen feed with limited number of injection points indicated a signi ficant improvement on the reactor performance in terms of propane conversion and propylene selectivity.Besides,this concept could overcome the reactor runaway temperature problem and enabled operations at the wider range of conditions to obtain enhanced propylene production in an industrial scale reactor.