Nonlinear transversal vibration of an axially moving viscoelastic string on a viscoelastic guide subjected to mono-frequency excitation

In this paper, the nonlinear transversal vibration of an axially moving viscoelastic string on a viscoelastic guide subjected to a mono-frequency excitation is considered. The model of the viscoelastic guide is a parallel combination of springs and viscous dampers. The governing equation of motion is developed using Hamilton’s principle. Applying the method of multiple scales to the governing partial differential equation, the solvability condition and approximate solutions are derived. Three cases, namely primary, subharmonic and superharmonic resonances are studied and appropriate analytical solutions are obtained. The effect of mean value velocity, force amplitude, guide stiffness and viscosity coefficient of the string on the frequency-response and bifurcation points is investigated. Findings are in good agreement with results extracted from numerical modeling.     

A new design of optical add/drop filters and multi-channel filters based on hexagonal PhCRR for WDM systems

Photonic Network Communications - In this research, using photonic crystal dielectric rods with a triangular lattice constant, a photonic crystal ring resonator (PhCRR) has been designed in order...     

Preliminary analysis of spatial development of karst using a geostatistical simulation approach

Earth science phenomena are primarily spatially dependent with variations occurring on varying scales. Geostatistics is a well-known approach for the assessment of spatial models of regionalized variables, such as porosity. In this study, we used the results of 953 Lugeon tests (402 tests in exploratory wells and 550 tests in grouting wells) to assess effective porosity and karst development at the Tangab Dam site, Iran. Lugeon values were first normalized, following which the variogram method (i.e., range, sill, and nugget effect) was used to identify the spatial variability of Lugeon values. A high correlation range of 200 m was obtained along the grout curtain galleries, while the range was about 40 m in the vertical direction. The simple kriging method with Gaussian variograms was determined to be the best method for estimating the Lugeon values in the study area using cross validation-criteria (e.g., RMSE = 0.835 and ρ = 0.914). Spatial variation of Lugeon values was mapped using a simulated annealing approach. The analysis revealed: (1) a higher potential for karst development on the left abutment of the Tangab Dam site, (2) the average of simulated Lugeon values decreased from values of about 180 close to the ground surface at 1,440 m a.s.l. to lower values of about 50 at 1,260 m a.s.l., and (3) high Lugeon values in the abutments of the dam site approximately followed the 15° bedrock dip, which confirms the potential development of karst features in the Asmari limestone. A schematic model for development of karst at the Tangab Dam site is proposed based on hydrogeological data and results of simulated Lugeon values around the dam site.     

Ionic conduction and crystal structure of aluminum doped NASICON-type LiGe<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript> glass-ceramic crystallized at different times and temperatures

In this communication, NASICON-type glass-ceramic (lithium germanium phosphate, LiGe₂(PO₄)₃) was prepared as lithium super ionic conductor using aluminum as dopant for ionic conduction improvement. The solid solution was Li_1?+?xAl_xGe_2-x(PO₄)₃ (x?=?0.5) that Ge⁴⁺ ions were partially substituted by Al³⁺ ions in crystal structure. Initial glasses were converted to glass-ceramics at different times and temperatures for maximum ionic conduction achievement. The crystals were characterized by X-ray Diffraction (XRD), Field Emission Scanning Electron Microscopy (FESEM), Energy-Dispersive X-ray spectroscopy (EDX), Differential Scanning Calorimetry (DSC) and Complex Impedance Spectroscopy (CIS) methods. The maximum lithium ion conductivity for glass-ceramic, 5.32?×?10^?3 S/cm at 26 °C was obtained for specimen crystallized at 850 °C for 8 h with minimum activation energy of 0.286 eV. Increasing the crystallization temperature results in secondary phase formation in grain boundary and increasing in crystallization time results in microcracks formation in specimen. Both phenomena decreased the ionic conductivity.     

Biomonitoring of the adverse effects induced by the chronic exposure to lead and cadmium on kidney function: usefulness of alpha-glutathione S-transferase

A successful prevention of renal diseases induced by occupational exposure to lead (Pb) and/or cadmium (Cd) largely relies on the capability to detect nephrotoxic effects at a stage when they are still reversible or at least not yet compromising renal function. Hence, the aim of this cross-sectional study was to evaluate the usefulness of a set of early biological markers of oxidative stress or nephrotoxicity for the biomonitoring of workers occupationally exposed to Pb and/or Cd in a non-ferrous metal smelter, and gender, age, socioeconomic status, smoking habits, and drug use-matched control individuals. In exposed subjects, mean levels of Pb in blood and urine were also 387.1+/-99.1 microg Pb/L (1.868+/-0.478 micromol Pb/L) and 217.7+/-117.7 microg Pb/g creatinine (1.051+/-0.568 micromol Pb/g creatinine), and mean levels of Cd in blood and urine were 3.26+/-2.11 microg Cd/L (0.029+/-0.019 micromol Cd/L) and 2.51+/-1.89 microg Cd/g creatinine (0.022+/-0.017 micromol Cd/g creatinine), suggesting thereby relatively low occupational exposure levels. Statistically significant variations in zinc protoporphyrin, malondialdehyde, retinol binding protein, alpha-glutathione S-transferase, and urinary protein levels were reported between the two groups, and were closely correlated with Pb and/or Cd exposure levels. Variations in alphaGST levels were closely associated with Pb exposure. Taken together, these results suggest the use of alpha-glutathione S-transferase excretion in urine as a hallmark of early changes in the proximal tubular integrity.     

Preparation of AgO<Subscript>2</Subscript>/GrO nanocomposites by hydrothermal method and investigation of photoluminescence properties

This paper reports a novel processing route for producing AgO₂/GrO nanocomposites by hydrothermal method. AgO₂/GrO nanocomposites as semiconductor materials have been synthesized via a facile one-step process using AgNO₃ and glucose as starting reagents. We investigated the influence of the thermal decomposition temperature and reaction time, on the morphology and the particle size of AgO₂/GrO nanocomposites. The AgO₂/GrO nanocomposites were characterized by FT-IR, UV–Vis spectra, X-ray diffraction, scanning electron microscopy, transmission electron microscopy, photoluminescence spectroscopy, X-ray photoelectron spectroscopy and energy-dispersive X-ray spectroscopy. The obtained results exhibited that the synthesized nano product by calcining for 4 h showed excellent uniformity and quality.     

Measurement of the amount and rate of methane dissolution in pure water and aqueous solution of SDS + multi-wall carbon nanotubes + β-cyclodextrin

In this paper, the impact of the mixture of sodium dodecyl sulfate (SDS) + multi-wall carbon nanotubes (MWCNTs) + β-cyclodextrin on the quantity and initial rate of methane dissolved in water is investigated. The experiments were performed at a temperature range of 278.15–303.15 K and an initial pressure of 0.5 MPa. The experimental results show that simultaneous utilization of β-cyclodextrin (0.01 mass fraction), MWCNTs (0.0005 mass fraction), and SDS (0.001 mass fraction) at 278.15 K increases the amount and the rate of methane dissolution in water by 29.90% and 173.78%, respectively, compared to pure water. An increase in the temperature decreases the quantity and the initial rate of methane dissolution in all solutions containing additives. However, no consistent relationship is observed between the temperature and the enhancement percentage of solubility of methane in solutions containing additives.     

Partially decomposed PVP as a surface modification of ZnO,CdO, ZnS and CdS nanostructures for enhanced stability and catalytic activity towards sulphamethoxazole degradation

In order to prepare stable and efficient photocatalysts, a microwave-furnace-assisted method using ethylene glycol (EG) as a solvent has been employed to obtain metal oxides and metal sulphides nanocatalysts with partial decomposition of the polyvinylpyrrolidone (PVP) cap (P-ZnO, P-CdO, P-ZnS and P-CdS); this associates the protective functionality of PVP with enhanced catalytic activity due to effective carriers transfer. The as-produced catalysts characterization revealed an extended growth of metal oxides compared with metal sulphides, which is attributed to the competition of EG as the source of oxygen with PVP to capsulate metal oxides during the synthesis. Infrared spectra confirmed the PVP–metal complexation and partial decomposition of the polymer. Metal sulphides exhibited a better catalytic activity compared with metal oxides for sulphamethoxazole degradation in UVC light owing to their size and morphology impact; further, P-CdS induced 71% antibiotic degradation after 10 h of illumination with visible light compared with only 48% for P-ZnS, 29% for P-ZdO and 20% for P-CdO due to improved light absorption. Interestingly, around 86% degradation was induced by mixing P-CdS with P-ZnS in 80:20% ratio, indicating an enhanced visible light activity due to improved electron–hole pair separation and high redox potential of P-ZnS.     

Extraction of caffeine and catechins using microwave-assisted and ultrasonic extraction from green tea leaves: an optimization study by the IV-optimal design

In this research, optimal conditions for extraction of caffeine and polyphenols were established from Iranian green tea leaves. In the first step, caffeine was extracted with efficacy about 86% versed to 4.5% of EGC + EGCG. The EGCG + EGC was extracted from partially decaffeinated green tea leaves through microwave-assisted extraction (MAE) and ultrasound-assisted extraction (USE) with efficiency levels of 95 and 85%, respectively. The best results for the MAE process were obtained with 7.8 min and three number of extraction cycles and for the USE process were as followed: time 57 min, temperature 65 °C, and the number of extraction cycles 3. The total phenol content values at the best conditions of MAE and the USE processes were 125 ± 5 and 96 ± 6 mg gallic acid/g DW. The 50% inhibition (IC₅₀) on 1,1-diphenyl-2-picrylhydrazyl (DPPH) were 56 and 66 mg/g of phenol for the MAE and USE processes.     

Synthesis of phosphorus doped carbon nanotubes using chemical vapor deposition

Phosphorous-doped carbon nanotubes (PCNTs) was prepared via two-step methodology employing chemical vapor deposition, by using available starting materials and catalyst. First, CNTs was produced from acetylene gas at 750 ºC and then, PCNTs have been prepared with total yield of 44% by recooking of the prepared CNT with Ph₃P at 600 ºC. The product was characterized with FESEM, TEM and EDS analyses, which confirmed its nanotube shape and the presence of phosphorous atom. The high thermal stability of the product was obtained from TGA analysis, showing only 16.5% weight loss up to 890 ºC. The Raman spectrum of the product showed the I_D/I_G ration equal to 0.84. Moreover, the catalytic potency of the product has been examined in ORR electrochemical reaction using CV and LSV diagrams. The results confirmed appropriate catalytic activity and high stability of the product for this process.