High-performance polymer photovoltaic devices with inverted structure prepared by thermal lamination

Use of a lamination process for the introduction of Au electrode, instead of conventional metal evaporation, improved the power conversion efficiency (PCE) of inverted-structure photovoltaic devices from 1.6% to 2.6% based on a bulk heterojunction of poly(3-hexylthiophene) (P3HT) and (6,6)-phenyl C₆₁ butyric acid methyl ester (PCBM). X-ray photoelectron spectroscopy indicated that a thin layer of P3HT is spontaneously formed at the air/polymer blend layer interface during the spin-coating process. It is suggested that the vacuum-evaporated gold could destroy the surface-segregated thin layer of P3HT, while the lamination process preserves the surface structure working as an electron-blocking layer. The insertion of a PEDOT:PSS layer, between the metal electrode and polymer layer, in the lamination process further improved the PCE to 3.3% with a short-circuit current density of 9.94 mA cm⁻², an open-circuit voltage of 0.60 V, and a fill factor of 55% under AM1.5 100 mW cm⁻² irradiation.     

Durability of radiation-sterilized polymers III. Oxidation layer determined by chemiluminescence

Chemiluminescence (CL) analysis was used for determining the oxidation layer formed by the irradiation of polypropylene for medical supplies. The depth of the oxidation layer from the surface depended on dose rate and increased with decreasing dose rate. The oxidation occurred remarkably at a region near the surface area of the film where the diffusion of oxygen is more sufficient. On the contrary, there was very little oxidation in the interior portion. The oxidation layers of polypropylene samples irradiated with electron beam showed U-shaped profiles in the cross-section of film as did as a sample irradiated with γ-rays. However, the degree of oxidation by irradiation with electron beam was very small; CL intensity at the surface area was only one-third that for the γ-irradiated samples.     

Thermoplastic elastomer by radiation grafting. I. Evaluation of processability of natural rubber grafted methyl methacrylate

Processability of thermoplastic elastomer (TPE) prepared by radiation-induced grafting of methyl methacrylate (MMA) onto radiation vulcanized natural rubber latex (RVNRL) has been evaluated using a kneader and a hot roll mill at 150°C. It was found that mixing time and revolution rate (rpm) of the kneader have significantly affected the processability. The longer mixing time and the higher revolution rate result in better processability. In such processing conditions, however, the mechanical properties were found to be inferior because the molecular chain scissions occurred during the mixing. A considerable improvement of mechanical properties was obtained when the mixing was carried out without added process oils. Blends of the grafted vulcanized natural rubber latex (RVNRL-g-PMMA) and MMA grafted on unvulcanized natural rubber latex (NRL-g-PMMA) improved processability where the better processability could be achieved at a shorter mixing time and a lower revolution rate. In addition, a comparable value of mechanical properties was obtained.     

Studies on toxicity of multi-walled carbon nanotubes on Arabidopsis T87 suspension cells

The possible toxicities of agglomerates of multi-walled carbon nanotubes (MWCNTs) toward plant cells were evaluated. Arabidopsis T87 suspension cells were used as the model cells and decreases in values of cell dry weights, cell viabilities, cell chlorophyll contents, and superoxide dismutase (SOD) activities were seen for the cells cultured in media containing the agglomerates of MWCNTs, indicating the agglomerates of MWCNTs are toxic to the Arabidopsis T87 suspension cells. Moreover, the toxicities increased sharply as the diameters of the agglomerates of the MWCNTs became smaller. A concept based on the hypersensitive response is suggested to explain the possible toxic mechanism induced by the MWCNTs.     

Delamination growth mechanisms in woven glass fiber reinforced polymer composites under Mode II fatigue loading at cryogenic temperatures

The purpose of this research is to characterize the cryogenic delamination growth behavior in woven glass fiber reinforced polymer (GFRP) composite laminates subjected to Mode II fatigue loading. Mode II fatigue delamination tests were performed at room temperature, liquid nitrogen temperature (77 K) and liquid helium temperature (4 K) using the four-point bend end-notched flexure (4ENF) test method, and the delamination growth rate data for the woven GFRP laminates were obtained. The energy release rate range was determined by the finite element method. Microscopic examinations of the specimen sections and fracture surfaces were also carried out. The present results are discussed to obtain an understanding of the fatigue delamination growth mechanisms in the woven GFRP laminates under Mode II loading at cryogenic temperatures.     

Anodic acyloxylation based on the acid–base reactions between acetic acid or trifluoroacetic acid and solid-supported bases

We have developed a novel electrolytic system for anodic acyloxylation based on the acid–base reactions between acetic acid or trifluoroacetic acid and solid-supported bases. On the basis of the electrolytic system, anodic acyloxylation of organic compounds, which even have considerably high oxidation potentials, was successfully carried out to provide the corresponding acyloxylated products in moderate to excellent yields. Furthermore, it was found that silica gel supported bases are not only chemically stable under acidic conditions but also electrochemically stable and thus reusable for many times.     

One-step formation of ethyl methyl ketone from 1-butene and water on ultrastable Y-type zeolite catalyst

Proton exchanged ultrastable Y-type zeolite with silica/alumina = 40 showed a pronounced catalytic activity for the formation of ethyl methyl ketone directly from 1-butene and water. The formation rate of ethyl methyl ketone was much higher than those on MoO₃-based catalysts in the oxidation of 1-butene by oxygen. It was suggested that the basic site necessary for the formation of ethyl ketone directly from 1-butene and water would be the pentacoordinated Al.     

Improvement of ageing properties of rubber films prepared from radiation-vulcanized natural rubber latex

Radiation-vulcanization of natural rubber latex (NRL) with n-butyl acrylate gives a higher tensile strength for films obtained after casting. The ageing properties of radiation-vulcanized natural rubber in the presence of various antioxidants have been investigated. In order to find out suitable antioxidants for radiation-vulcanized natural rubber latex (RVNRL) films, extraction of the gel fraction was carried out in xylene with 1 wt.-% antioxidant and air bubbling. Antioxidants which give less reduction in gel fraction due to oxidative degradation during extraction are effective for ageing tests of RVNRL films. It was found that tris(nonylated phenyl) phosphite (Nonflex TNP) and 2,5-di-tert-amylhydroquinone (Antage DAH), among 12 different antioxidants tested, were the most effective antioxidants for RVNRL films.     

Intentional side etching to achieve low-noise GaAs f.e.t.

A very-low-noise 0.5 ?m-gate GaAs f.e.t. is realised by using intentional side etching of an Au/Ti double layer as the Schottky-gate metal. At 12 GHz, the minimum noise figure is 2.1 dB, with 7.6 dB associated gain at a bias of VD = 4 V, ID= 10 mA. Maximum stable gain is 14 dB at VD = 4 V, ID = 30 mA.