Analytical models for the series resistance of selective emitters in silicon solar cells including the effect of busbars

A theoretical analysis of the power loss and series resistance of the front side emitter in silicon solar cells is presented. Existing 1D models (infinitely long finger) and 2D models (including the effect of busbars) of emitter series resistance contribution are extended to the case of selective emitters. The general case of different current densities for both emitters in the selective emitter scheme is considered in these extensions. The resulting models depend on the individual sheet resistances and current densities in both emitters and the device's overall grid geometry. The models are corroborated by finite element simulation of the potential in the emitter. An excellent agreement is found between the analytical models, and the simulations for a wide range of sheet resistances typically encountered in silicon solar cells. Grid simulations using the 2D model are applied to solar cells with selective emitters, where the width of the low‐resistive emitter was varied. The simulations demonstrate that the 2D model can explain the absolute change in fill factor observed in these cells. Copyright © 2013 John Wiley & Sons, Ltd.     

The influence of impregnation condition on reinforced ethylene–vinyl–acetate elastomer composite

Experiments were conducted to investigate the effect of impregnation conditions on glass fiber-reinforced ethylene–vinyl–acetate elastomer. Both the matrix elastomer resin and reinforcing glass fiber were premixed and compression-molded using a specially constructed mold. The mold prevents the flowing out of the matrix resin during fabrication. The impregnation time was varied between 5 and 25 min. The level of impregnation was measured through the optical micrographs of the cross section, estimation of void contents using the ignition method, and transverse bending strength. The morphology of the fractured surface was studied using scanning electron microscopy (SEM). The results showed that the longer the impregnation time, the lower the void contents. Both the bending modulus and strength increased with increasing impregnation time. The SEM micrograph shows little adhesion between the matrix and the reinforcing glass fiber. © 1996 John Wiley & Sons, Inc.     

Production and purification of a fused recombinant protein gp-36 (HIV-2) from Escherichia coli

A fragment of the gp-36 gene of the Human Immunodeficiency Virus type 2 (HIV-2) was fused to a stabilizer sequence, which encodes for the first N-terminal 58 amino acids of the human interleukin-2. The fused protein was expressed under the control of the tryptophan promoter in Escherichia coli, and expressed as 20% of the total cellular protein. Transmission electron microscopy indicated that the fusion protein formed cytoplasmic insoluble inclusion bodies. Inclusion bodies were semipurified by a wash pellet cell procedure, rendering a material with a purity higher than 70% by SDS–polyacrylamide gel electrophoresis. After solubilization with urea, this preparation was further purified by gel-filtration chromatography up to 95% purity.     

Anionic synthesis of aromatic carboxyl functionalized polymers. Chain-end functionalization of poly(styryl)lithium with 4,5-dihydro-4,4-dimethyl-2-[4-(1-phenylethenyl)phenyl] oxazole

The novel syntheses of 4-(4,5-dihydro-4,4-dimethyl-2-oxazolyl)benzophenone, 1-[4-(4,5-dihydro-4,4-dimethyl-2-oxazolyl)phenyl]-1-phenylethanol and 4,5-dihydro-4,4-dimethyl-2-[4-(1-phenylethenyl)phenyl]oxazole ( 1 ) are described. ω-Oxazolyl polystyrene ( 2 ) was synthesized in quantitative yields by the reaction of poly(styryl)lithium with stoichiometric amounts of 4,5-dihydro-4,4-dimethyl-2-[4-(1-phenylethenyl)phenyl]oxazole ( 1 ) in toluene/tetrahydrofuran (4 : 1 v/v) at −78°C. Deblocking of the oxazoline protecting group by acid hydrolysis followed by saponification quantitatively provides the corresponding aromatic carboxyl chain-end functionalized polystyrene ( 3 ). The functionalization agent and functionalized polymers were characterized by HPLC, thin layer chromatography, size exclusion chromatography, vapor phase osmometry, spectroscopy (¹H NMR, ¹³C NMR and FTIR), potentiometry and elemental analysis.     

The Association between Gut Microbiota and Osteoarthritis: Does the Disease Begin in the Gut?

Some say that all diseases begin in the gut. Interestingly, this concept is actually quite old, since it is attributed to the Ancient Greek physician Hippocrates, who proposed the hypothesis nearly 2500 years ago. The continuous breakthroughs in modern medicine have transformed our classic understanding of the gastrointestinal tract (GIT) and human health. Although the gut microbiota (GMB) has proven to be a core component of human health under standard metabolic conditions, there is now also a strong link connecting the composition and function of the GMB to the development of numerous diseases, especially the ones of musculoskeletal nature. The symbiotic microbes that reside in the gastrointestinal tract are very sensitive to biochemical stimuli and may respond in many different ways depending on the nature of these biological signals. Certain variables such as nutrition and physical modulation can either enhance or disrupt the equilibrium between the various species of gut microbes. In fact, fat-rich diets can cause dysbiosis, which decreases the number of protective bacteria and compromises the integrity of the epithelial barrier in the GIT. Overgrowth of pathogenic microbes then release higher quantities of toxic metabolites into the circulatory system, especially the pro-inflammatory cytokines detected in osteoarthritis (OA), thereby promoting inflammation and the initiation of many disease processes throughout the body. Although many studies link OA with GMB perturbations, further research is still needed.     

A regression model for prediction of pipe conveyor belt contact forces on idler rolls

The paper presents design and verification of regression models for prediction of pipe conveyor belt contact forces on idler rolls. Their advantage is in the fact that they have been created according to the real experimental measurement. The obtained models correspond with real operational conditions. The concept of the experimental rig at the Technical University of Košice is designed so that it represents 8 m long section of pipe conveyor. The conveyor belt is an object with action of tension force and at the same time it takes the initiative in the contact force formation. Several criteria have been used to verify the presented regression models. The tensioning force 9000, 12,000 and 15,000 N have MPE of prediction error less than 5%. About 120,000 measured values have been processed during the evaluations which correspond to approximately 15,000 results from experimental measurements.     

Physicochemical changes occurring during post-harvest hardening of trifoliate yam (Dioscorea dumetorum) tubers

Processing of Dioscorea dumetorum tubers into flour could be a means of adding a longer-term value to this tropical plant with a high nutritional potential but which presents a post-harvest hardening problem. This study was carried out in order to investigate the effect of storage under prevailing tropical ambient conditions (19–28 °C, RH 60–85%) for 56 days on the physicochemical characteristics of flours produced from hardened tubers. With the exception of bulk density, the results showed that all the physicochemical properties measured (water absorption capacity, oil absorption capacity, water solubility index, hydrophilic–lipophilic index, swelling capacity and least gelatinising concentration) were significantly influenced by tuber storage time (P<0.05). In general, the physicochemical indices increased with storage in at least two phases, from days 2 to 21 and from days 28 to 56. Since sprouting of most tubers was observed after 28 days of storage, the results suggest that post-harvest hardening and sprouting influence the above-mentioned indices of flours produced from D. dumetorum tubers.