Two-Way Protocol with Imperfect Devices

The security of a deterministic quantum scheme for communication, namely the LM05 [1], is studied in presence of a lossy channel under the assumption of imperfect generation and detection of single photons. It is shown that the scheme allows for a rate of distillable secure bits higher than that pertaining to BB84 [2]. We report on a first implementation of LM05 with weak pulses.     

N-phenyl piprazine-polyester derivative as curing activator of unsaturated resins

An oligomeric compound (Pol-2A) has been synthesized by a Michael-type addition of N-phenyl piperazine to double bonds of the maleic units of a polyester resin. This compound was used as activator (with benzoyl peroxide) in the curing of unsaturated polyester resins and compared in its efficiency with N,N-dimethylaniline (DMA). Pol-2A showed actiator characteristics comparable to those of DMA, with a wider range of gel times, and similar mechanical properties of the end products, with the advantage of a severe lowering of diffusibility and related environmental toxicity.     

Transmission line routing for reduced external field disturbance

When immersed in a disturbing electromagnetic field, electronic systems are subject to interference due to the energy injected by the external field into the system through the electronic units and, especially, through the transmission lines connecting units one another. The issue of reducing the unwanted energy injection through connecting transmission lines is addressed in this contribution from the point of view of the routing, i.e. of the disposition of the connecting lines that minimizes the injection. The problem is formulated as an optimization problem, dealt with by the simulated annealing minimization technique combined with an efficient way of computing the field coupling to the lines. Results are reported for various cases, and the relation between the characteristics of the interfering field and the efficiency of the reduction is discussed.     

Peripheral O2 diffusion does not affect V(O2)on-kinetics in isolated insitu canine muscle

To test the hypothesis that muscle O2 uptake (V(O2)) on-kinetics is limited, at least in part, by peripheral O2 diffusion, we determined the V(O2) on-kinetics in 1) normoxia (Control); 2) hyperoxic gas breathing (Hyperoxia); and 3) hyperoxia and the administration of a drug (RSR-13, Allos Therapeutics), which right-shifts the Hb-O2 dissociation curve (Hyperoxia+RSR-13). The study was conducted in isolated canine gastrocnemius muscles (n = 5) during transitions from rest to 3 min of electrically stimulated isometric tetanic contractions (200-ms trains, 50 Hz; 1 contraction/2 s; 60-70% peak V(O2)). In all conditions, before and during contractions, muscle was pump perfused with constantly elevated blood flow (Q), at a level measured at steady state during contractions in preliminary trials with spontaneous Q x Adenosine was infused intra-arterially to prevent inordinate pressure increases with the elevated Q x Q was measured continuously, arterial and popliteal venous O2 concentrations were determined at rest and at 5- to 7-s intervals during contractions, and V(O2) was calculated as Q x arteriovenous O2 content difference. PO2 at 50% HbO2 saturation (P50) was calculated. Mean capillary PO2 (Pc(O2)) was estimated by numerical integration. P50 was higher in Hyperoxia+RSR-13 [40 +/- 1 (SE) Torr] than in Control and in Hyperoxia (31 +/- 1 Torr). After 15 s of contractions, Pc(O2) was higher in Hyperoxia (97 +/- 9 Torr) vs. Control (53 +/- 3 Torr) and in Hyperoxia+RSR-13 (197 +/- 39 Torr) vs. Hyperoxia. The time to reach 63% of the difference between baseline and steady-state V(O2) during contractions was 24.7 +/- 2.7 s in Control, 26.3 +/- 0.8 s in Hyperoxia, and 24.7 +/- 1.1 s in Hyperoxia+RSR-13 (not significant). Enhancement of peripheral O2 diffusion (obtained by increased PcO2 at constant O2 delivery) during the rest-to-contraction (60-70% of peak V(O2)) transition did not affect muscle V(O2) on- kinetics.     

Microfluidic motion for a direct investigation of solvent interactions with PDMS microchannels

Solid surface/liquid interactions play an important role in microfluidics and particularly in manipulation of films, drops and bubbles, a basic requirement for a number of lab-on-chip applications. The behavior of solvents in coated microchannels is difficult to be predicted considering theories; therefore, experimental methods able to estimate the properties at the interface in real time and during the operational regime are amenable. Here, we propose to use an experimental setup to evaluate the effective dynamics of solvents inside PDMS microchannels. The influence of the solvent properties as well as of the channel wall’s wettability on the fluid movements was evaluated. Modification of the channel properties was achieved by introducing Teflon coatings that allow producing stable hydrophobic microchannel walls. The results were fitted according to Washburn-type power-law and compared with theoretical calculations of the parameter β that expresses the dependence of capillary dynamics on surface tension γ, liquid viscosity η, contact angles θ and the hydraulic radius R _H. A comparison between the calculated and the experimental values reveled that parameters other than the contemplated ones influenced the measurements. The main parameter that affects the flow of solvents such as water, methanol ethanol, dimethylformamide, acetonitrile and acetone was found to be the γ/η ratio. Considering these results, the investigation tool described here is believed to be promising to predict the dynamics of common organic solvents inside integrated functional fluidic devices and to accurately control solvent flow, particularly in capillary-driven pumpless systems, a basic requirement for widening the application range of PDMS lab-on-chip devices.     

Stannate and permanganate conversion coatings on AZ31 magnesium alloy

The formation of stannate and permanganate–phosphate conversion coatings on AZ31 magnesium alloy was investigated in situ by EIS measurements and their protective performances were studied by different electrochemical techniques in diluted (0.05 M) sodium sulphate solution.The influence that short or long treatment times exert on the performances of such conversion coatings is discussed. While permanganate–phosphate baths always built layers characterized by penetrating cracks, long stannate baths produced layers without interconnected porosity, but were defective. This accounted for the initial greater protectiveness achieved with the stannate treatment; nevertheless, the easy penetration of the electrolytic solution through such a layer quickly decreased its corrosion resistance.     

High-Fat Diet Leads to Reduced Protein O-GlcNAcylation and Mitochondrial Defects Promoting the Development of Alzheimer’s Disease Signatures

The disturbance of protein O-GlcNAcylation is emerging as a possible link between altered brain metabolism and the progression of neurodegeneration. As observed in brains with Alzheimer’s disease (AD), flaws of the cerebral glucose uptake translate into reduced protein O-GlcNAcylation, which promote the formation of pathological hallmarks. A high-fat diet (HFD) is known to foster metabolic dysregulation and insulin resistance in the brain and such effects have been associated with the reduction of cognitive performances. Remarkably, a significant role in HFD-related cognitive decline might be played by aberrant protein O-GlcNAcylation by triggering the development of AD signature and mitochondrial impairment. Our data support the impairment of total protein O-GlcNAcylation profile both in the brain of mice subjected to a 6-week high-fat-diet (HFD) and in our in vitro transposition on SH-SY5Y cells. The reduction of protein O-GlcNAcylation was associated with the development of insulin resistance, induced by overfeeding (i.e., defective insulin signaling and reduced mitochondrial activity), which promoted the dysregulation of the hexosamine biosynthetic pathway (HBP) flux, through the AMPK-driven reduction of GFAT1 activation. Further, we observed that a HFD induced the selective impairment of O-GlcNAcylated-tau and of O-GlcNAcylated-Complex I subunit NDUFB8, thus resulting in tau toxicity and reduced respiratory chain functionality respectively, highlighting the involvement of this posttranslational modification in the neurodegenerative process.     

Visual discovery of the correlation between BGP routing and round-trip delay active measurements

Inter-domain routing data and Internet active probing measurements are two types of information commonly available in huge datasets and subject to extensive, focused analysis. However, the study of the correlation between these two complementary types of information still remains one of the most challenging problems in today’s research in networking. In this paper we describe a metaphor for the visualization of the interplay between the routing information exchanged via BGP and the round-trip delay measurements collected by several geolocated probes. We implemented a prototype based on the above metaphor. Our prototype highlights both the Autonomous System topology and the latency associated with each AS-path over time. Further, it shows how probes are partitioned into clusters associated with each border gateway, based on observed traffic patterns. The resulting visualization allows the user to explore the dynamics of the correlation between the two types of information.     

Grain-Boundary Wetting-Dewetting in z= 1 SiAlON Ceramic

The grain-boundary structure of a model SiAlON polycrystal with nominal composition Si₅AlON₇ was characterized by transmission electron microscopy (TEM) both in an equilibrium (as-processed) state at room temperature and after quenching from elevated temperature. In addition, low-frequency (1–13 Hz) internal friction data were recorded as a function of temperature, showing a pronounced grain-boundary sliding peak positioned at 1030°C. High-resolution transmission electron microscopy (HRTEM) of the equilibrated low-temperature microstructure revealed residual glass only at multigrain junctions, but no amorphous intergranular films were observed. The detection of clean interfaces in the as-processed sample contradicts the internal friction data, which instead suggests the presence of a low-viscosity grain boundary phase, sliding at elevated temperatures. Therefore, a thin section of the as-sintered material was heated to 1380°C and rapidly quenched. HRTEM analysis of this sample showed, apart from residual glass pockets, wetted grain boundaries, which is in line with the internal friction experiment. This wetting-dewetting phenomenon observed in z = 1 SiAlON is expected to have a strong impact not only on high-temperature engineering ceramics but also on geological, temperature-activated processes such as volcanic eruptions.