Investigation of Subthreshold Characteristics of Negative Capacitance Single-Active Layer Double-Gate (NC-SALDG) Thin-Film Transistor (TFT)

Silicon - In this paper, for the first time, the performance evaluation of negative capacitance single-active layer double-gate (NC-SALDG) TFT is presented. In the proposed NC-SALDG TFT, amorphous...     

Soluble‐eggshell‐membrane‐protein‐modified porous silk fibroin scaffolds with enhanced cell adhesion and proliferation properties

In this study, a porous silk fibroin (SF) scaffold was modified with soluble eggshell membrane protein (SEP) with the aim of improving the cell affinity properties of the scaffold for tissue regeneration. The pore size and porosity of the prepared scaffold were in the ranges 200–300 μm and 85–90%, respectively. The existence of SEP on the scaffold surface and the structural and thermal stability were confirmed by energy‐dispersive X‐ray spectroscopy, X‐ray diffraction, Fourier transform infrared spectroscopy, differential scanning calorimetry, and thermogravimetric analysis. The cell culture study indicated a significant improvement in the cell adhesion and proliferation of mesenchymal stem cells (MSCs) on the SF scaffold modified with SEP. The cytocompatibility of the SEP‐conjugated SF scaffold was confirmed by a 3‐(4,5‐dimethyltriazol‐2‐y1)‐2,5‐diphenyl tetrazolium assay. Thus, this study demonstrated that the biomimic properties of the scaffold could be enhanced by surface modification with SEP. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40138.     

Dependence of zeolite topology on alkane diffusion inside diverse channels

Zeolites have been widely used for the processes of adsorption, separation, and catalysis, which are strongly correlated with molecular diffusion. However, the correlation between pore dimension and diffusion properties has not been systematically investigated so far. In this work, the diffusion properties of alkanes in six zeolites with similar pore sizes but different pore dimension have been examined. It is found that the diffusion coefficients of alkanes in zeolites are 2–5 orders of magnitude smaller than that in gas phase. Moreover, the diffusion of alkanes inside zeolites is sensitive to the pore dimension, and can be differentiated by 1-D straight, 1-D tortuous, and 3-D intersecting channels, based on the derived quantitative correlation between the diffusion behavior and pore dimension. Our work may not only provide deep insights into the effects of pore dimension on diffusion, but also benefits for the future design and practical applications of zeolite catalysts.     

Synthesis,characterization of β-CD based novel hydrogels with dual objectives of drug release and dye removal

Iranian Polymer Journal - In our recent work, we have reported on hydrogels devoid of cross-linkers. After observing the successful swelling and water retention properties, we have introduced...     

Dietary Intake and Food Sources of Total and Individual Polyunsaturated Fatty Acids in the Belgian Population Over 15 Years Old

Advances in our knowledge of the physiological functions of dietary polyunsaturated fatty acids (PUFAs) have led to an increased interest in food sources and the level of dietary intake of these nutrients. Up to now, no representative data was available for the Belgian adult population. This study aimed to describe data on the intake and food sources of total and individual omega-6 and omega-3 PUFA for the Belgian population over 15 years old. PUFA intakes were assessed for 3,043 Belgian adults, based on two non-consecutive 24 h recalls. Usual intakes were calculated using the multiple source method. The results showed that the intake of linoleic acid (LA) is in accordance with the recommendation for almost all Belgian adults. However, the intake of omega-3 PUFA is suboptimal for a large part of the studied population and also the intake of total PUFA should be increased for a part of the population. The main food source of LA and α-linolenic acid (ALA) was the group of fats and oils (60.6 % for LA and 53.1 % for ALA). Fish and fish products were the most important sources of long chain omega-3 PUFA. Age influenced fatty acids intake, with higher intake of omega-3 PUFA in the older age groups. To fill the gap between the intake and recommendation of total PUFA, and in particular omega-3 PUFA, sustainable strategies and efficient consumer communication strategies will be needed.     

Moisture diffusion through (hexadecyltrimethylammonium bromide ‐ Indian bentonite)/(vinylester) nanocomposites in artificial seawater and demineralized water

This paper compares the moisture diffusion properties of organomodified (Indian Bentonite nanoclay)/vinylester containing different amounts of nanoclay on exposure to demineralized water and artificial seawater at room temperature. Moisture uptake behavior of (Indian Bentonite)/vinylester was investigated and compared with that of neat vinylester. Addition of 5 wt% nanoclay decreased the diffusivity and permeability of vinylester in artificial seawater medium, but these diffusion parameters increased in demineralized water medium. Degradation in glass transition temperature and microhardness of the nanocomposites were much greater in specimens aged in demineralized water than in those in artificial seawater medium. Moisture diffusion behavior of the specimens was analyzed by Fick's law and the Langmuir model. The aged specimens were chemically analyzed by using infrared spectroscopy after aging for 146 days. A significant amount of leached organic species was detected in the demineralized water–aged specimens but the same was absent in those aged in artificial seawater. J. VINYL ADDIT. TECHNOL., 22:441–451, 2016. © 2015 Society of Plastics Engineers     

Retarding autoxidation in raw peanut oil by addition of water

Addition of water at levels of 0.25 to 1.00% (wt/vol) to raw peanut oil inhibited the formation of peroxides in the oil. The free fatty acid content of oils to which water had been added also did not increase appreciably compared to a control oil. To improve the stability of the oil, a moisture content of 0.2%, which is about ten times higher than the Brunauer-Emmett-Teller monomolecular moisture content of the oil, has been suggested.     

Stability of Cold-Pressed Oil from Commercial Indian Niger (Guizotia abyssinica (L.f.) Cass.) Seed as affected by Blending and Interesterification

Blending and interesterification of cold‐pressed oil from commercially available niger (Guizotia abyssinica (L.f.) Cass.) seeds was performed to improve its stability. The fatty acid composition of cold‐pressed niger seed oil (NSO) revealed that it contained a huge amount of polyunsaturated linoleic acid (69.2 %). NSO being rich in polyunsaturated fatty acids (PUFA) was susceptible to oxidation and hence was blended with saturated fatty acid (SFA) rich coconut oil (CNO) and monounsaturated fatty acid (MUFA) rich olive–pomace oil (OO) to enhance its stability. CNO contained a total of 91.3 % of SFA, while OO had oleic acid, C18:1 (74.3 %) as MUFA. Two blends of NSO with CNO and OO, i.e. NSO + CNO(B) and NSO + OO(B), were prepared in the ratio of 1:1. The blends were further interesterified using the lipase enzyme from Rhizomucor meihei and interesterified oils, i.e. NSO + CNO(I) and NSO + OO(I), were obtained. The oxidative stability of the oils was evaluated by incubating them at 37 °C and 55 % relative humidity (RH) for a period of 45 days. The peroxide values of NSO + CNO(B), NSO + OO(B), NSO + CNO(I) and NSO + OO(I) showed a reduction by 53.3, 42.6, 65.3 and 55.4 %, respectively, while the conjugated diene values showed a reduction by 75.0, 66.9, 76.7 and 75.3 %, respectively, as compared to NSO during the incubation period. This is probably the first report on the stability improvement of niger seed oil through blending and interesterification.     

Hydrogen permeation during zinc-manganese alloy plating

Electrodeposition of metals from solution is usually accompanied by the simultaneous discharge of hydrogen ions or water molecules. When hydrogen is liberated at an iron/steel surface during electrodeposition, a portion of the hydrogen is absorbed by the metal surface and then diffuses into the interior. The diffused hydrogen produces some detrimental effects, such as reduction in ductility and loss in mechanical strength, leading to hydrogen embrittlement. The present paper reports investigations on hydrogen permeation measurements in zinc-manganese alloy deposition using a modified electrode clamp for easy removal and fixing of the electrode. Hydrogen permeation studies indicate that the porosity of the deposit increases in the following order:Zn-Mn(14.3%), Zn-Mn(2.4%), Zn-Mn(24.8%) and Zn-Mn(37.5%).This is in agreement with the corrosion data obtained which indicates that Zn-Mn alloy deposits with low manganese content show better performance than pure zinc deposits.     

Hydrogen generation in a Pd membrane fuel processor: Productivity effects during methanol steam reforming

Performance analyses are carried out for the palladium membrane fuel processor for catalytic generation of high purity hydrogen. The reactor model includes detailed particle-scale multi-component diffusion, multiple reversible reactions, flow, and membrane transport. Using methanol steam reforming on Cu/ZnO/Al₂O₃ catalyst as the test reaction, a systematic examination of the effects of operating and reactor design parameters on key performance metrics is presented. Single particle simulations reveal a complex interplay between nonisobaric transport and the reversible reactions (methanol reforming and decomposition, and water-gas shift), which impact overall reactor performance. An analysis of characteristic times helps to identify four different productivity controlling regimes: (i) permeation control, encountered with thick membranes and/or insufficient membrane area; (ii) catalyst pore diffusion control encountered with diffusion of reacting species in larger particles; (iii) reaction control, encountered when intrinsic catalytic rates are too low because of inadequate activity or catalyst loading; and (iv) feed control, encountered when the limiting reactant feed rate is inadequate. The simulations reveal that a maximum in the hydrogen productivity occurs at an intermediate space velocity, while the hydrogen utilization is a decreasing function of space velocity, implying a trade-off between productivity and hydrogen utilization. The locus of productivity maxima itself exhibits a maximum at an intermediate membrane surface to volume ratio, the specific value of which is dependent on the particle size, membrane thickness and reaction conditions. At moderate temperature and total pressure (, 10 bar), particles smaller than 2 mm diameter, Pd membranes with thickness less than , and membrane surface to volume ratio exceeding are needed to achieve viable productivity . A comparison between the packed-bed membrane reactor and conventional packed-bed reactor indicates a modest improvement in the conversion and productivity due to in situ hydrogen removal.