Development of polarization ratio model for sea surface wind field retrieval from TerraSAR-X HH polarization data

In this article, the polarization ratio (PR) of TerraSAR-X (TS-X) vertical–vertical (VV) and horizontal–horizontal (HH) polarization data acquired over the ocean is investigated. Similar to the PR of C-band synthetic aperture radar (SAR), the PR of X-band SAR data also shows significant dependence on incidence angle. The normalized radar cross-section (NRCS) in VV polarization data is generally larger than that in HH polarization for incidence angles above 23°. Based on the analysis, two PR models proposed for C-band SAR were retuned using TS-X dual-polarization data. A new PR model, called X-PR hereafter, is proposed as well to convert the NRCS of TS-X in HH polarization to that in VV polarization. By using the developed geophysical model functions of XMOD1 and XMOD2 and the tuned PR models, the sea surface field is retrieved from the TS-X data in HH polarization. The comparisons with in situ buoy measurements show that the combination of XMOD2 and X-PR models yields a good retrieval with a root mean square error (RMSE) of 2.03 m s^–1 and scatter index (SI) of 22.4%. A further comparison with a high-resolution analysis wind model in the North Sea is also presented, which shows better agreement with RMSE of 1.76 m s^–1 and SI of 20.3%. We also find that the difference between the fitting of the X-PR model and the PR derived from TS-X dual-polarization data is close to a constant. By adding the constant to the X-PR model, the accuracy of HH polarization sea surface wind speed is further improved with the bias reduced by 0.3 m s^–1. A case acquired at the offshore wind farm in the East China Sea further demonstrates that the improvement tends to be more effective for incidence angles above 40°.     

压痕残余应力对氮化硅基复合材料阻力曲线行为的影响

通过压痕小裂纹直接量测法获得了ＴｉＣ，ＴｉＮ／Ｓｉ３Ｎ４复合材料的阻力曲线，采用更具合理性的指数经验公式拟合处理实验数据，初步探讨了Ｋ∞，Ｋ＾＊Ｒ，ΔＣ，等参数的物理意义。对压痕残余应力消除前 实验结果进行比较，发现压痕残余应力的消除，提高了材料的极限断裂韧性值Ｋ＾＊Ｒ，却大大减少了裂纹稳态生长的容限，使得材料的脆性行为更为突出。     

尿基复合肥生产技术的改进

通过分析尿基复合肥生产过程中出现的问题，并相应提出技术改进措施，优化操作，对复合肥产量的提高和产品质量的控制都取得了明显的效果。     

两亲性无规共聚物MAA-SMA-PEGMA的表面活性研究

利用功能性单体甲基丙烯酸(MAA)、甲基丙烯酸十八烷基酯(SMA)和聚乙二醇甲基丙烯酸酯(PEG-MA)通过自由基共聚,合成了两亲性共聚物Poly(MAA-SMA-PEGMA)。研究了其结构、临界胶束浓度(CMC)和表面张力,探讨了由共聚物与低分子表面活性剂组成的复配体系。结果表明高低分子表面活性剂复配体系在质量比为5∶5后,体系的表面张力和临界胶束浓度都有所降低,接近于低分子表面活性剂。     

Preparation and properties of PET/PA6 copolymer/montmorillonite hybrid nanocomposite

From in situ polycondensation, a poly(ethylene terephthalate)/Polyamide 6 copolymer/montmorillonite nanocomposite was prepared, after the treatment of montmorillonite (MMT) with a water soluble polymer. The resulting nanocomposites were characterized by X‐ray diffraction (XRD), differential scanning calorimeter (DSC), nuclear magnetic resonance (NMR), dynamic mechanical analysis (DMA), and transmission electron microscopy (TEM). The results of DSC, ¹H NMR, and DMA proved that the nanocomposite synthesized was PET/PA6 copolymer/MMT nanocomposite, not the PET/PA6 blend/MMT nanocomposite. The results of XRD and TEM proved that the dispersion of MMT was improved observably after the introduction of PA6 molecular chain into PET. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2512–2517, 2006     

Novel method for preparation of quaternary ammonium ionomer from epoxidized styrene–butadiene–styrene triblock copolymer and its use as compatibilizer for blending of styrene–butadiene–styrene and chlorosulfonated polyethylene

A novel method for the preparation of a quaternary ammonium ionomer of styrene–butadiene–styrene triblock copolymer (SBS) was developed by a ring‐opening reaction of epoxidized SBS with triethylamine hydrochloride in the presence of a phase transfer catalyst. The optimum conditions were studied. The ionomer was characterized by quantitative analysis, IR spectroscopy, and ¹H‐NMR spectroscopy. Its water absorbency, oil absorbency, dilute solution viscosity, and use as a compatibilizer for the blending of SBS and chlorosulfonated polyethylene (CSPE) were investigated. The results showed that, under optimum conditions, the epoxy groups can be completely converted to the quaternary ammonium groups. The IR spectrum did not exhibit the absorption peak for quaternary ammonium groups, whereas the ¹H‐NMR spectrum and titration method demonstrated it. With increasing ionic group content, the water absorbency of the ionomer increased whereas its oil absorbency decreased. These indicated the amphiphilic character of the SBS ionomer. The dilute solution viscosity of the ionomer in toluene/methanol (9/1) solvent increased with increasing quaternary ammonium group content. The ionomer was used as a compatibilizer for the blends of SBS and CSPE. The addition of a small amount of the ionomer to the blend enhanced the mechanical properties of the blends: 2 wt % ionomer based on the blend increased the tensile strength and ultimate elongation of the blend nearly 2 times. The blends of equal parts SBS and CSPE behaved as oil‐resistant thermoplastic elastomers. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1975–1980, 2006     

Direct synthesis of electrorheological suspension containing salt of poly(methacrylic acid) and its electrorheological effect

Colloidal suspensions containing salts of poly(methacrylic acid) which exhibit high electrorheological (ER) activity were synthesized by inverse emulsion polymerization. Factors influencing the ER effect were studied. The results showed that maximum yield stress occurred at optimum amounts of both polymeric stabilizer and crosslinking agent used in the inverse emulsion polymerization as well as a certain water content of the particles, while yield stress increased with electric field strength, average diameter of the particles below 0.9 μm, or the molar ratio of the salt to the acid. The ER activity for the suspensions containing different monovalent counter ions decreased in the following order: Li⁺ > Na⁺ > K⁺ > NH₄⁺. The phenomena were discussed with the ionic polarization mechanism. © 1995 John Wiley & Sons, Inc.     

接受理论视角下的儿童文学翻译

接受理论的基本观点对儿童文学翻译研究也具有一定的启发和借鉴作用:译者在翻译的过程中不仅要尊重原文和原作者.也要尊重译文的目标语读者--儿童,充分考虑儿童读者的期待视野,从而实现原文与译者期待视野、译文与儿童读者期待视野之间的视野融合.     

Facile synthesis of uniform hollow hematite sub-micro spheres with controllable shell thickness

A simple method was developed to prepare the uniform hematite hollow submicro-spheres with controllable structure and different diameter based on monodisperse poly(styrene-co-acrylic acid) [P(St-co-AA)] particles. The structure and formation mechanism of the hollow spheres were investigated in detail. The control mechanism of shell thickness was also discussed. The results indicated that the shell thickness and coarseness of the synthesized core-shell hematite hollow spheres could be tuned simply by the surface carboxyl content of the P(St-co-AA) particles. This method provided a new approach for the structure control in the preparation of hollow spheres. A Brunauer-Emmett-Teller (BET) test shows that the prepared hollow spheres have large surface areas which were decreased along with the increase of the diameter. The magnetic properties of the as-obtained hematite hollow spheres were investigated. The result showed that the coercivity and saturated magnetization were increased along with the increase of the shell thickness, and the remanent magnetization was increased along with the decrease of the diameter.     

基于高精度流线生成的交互流场可视化

高效准确的流线绘制一直是流场可视化的重要研究内容,流线可以对流场的重要特征进行有效的稀疏表示,但流线需要长期的粒子追踪过程及大量的积分计算,在面向大规模流场可视化时时间效率较低,需要高性能计算设备进行辅助计算.本文通过设计一种基于深度学习的高精度流线生成算法,将初始的低精度流线快速映射为稠密的高精度流线,可以在较短的时间内快速生成可靠的流线可视化结果,并在此基础上设计了交互式实时流场可视化系统,涵盖了流场的特征检测,属性关联分析,信息论分析等,帮助用户快速了解流场数据,找到自己感兴趣的区域进行后续进一步深度分析,避免了获取过多冗余数据,同时优化了分析工作的效率,满足用户对于流场结构,特征属性等多维度进行关联分析的需求.