钒微合金Φ25mm热轧左旋带肋钢筋的研制与生产

通过对热轧左旋带肋钢筋（HRBL600）的质量特性分析,制定了热轧左旋带肋钢筋的化学成分,孔型设计方案和生产工艺。生产实践证明：该产品开发获得成功,产品质量达到标准要求。     

董公馆：嫁接之美

董公馆是一个6层楼的公寓，依山而建，业主将他交到设计师手里，让他在这基础上活活变出一个精美的“公馆”。     

Computer-aided design and analysis of direct-driven wheel motordrive

This paper presents the computer-aided design (CAD) and performance analysis of a novel direct-driven wheel brushless DC motor drive for electric vehicles (EVs). The proposed motor is a permanent magnet square-wave motor, whose rotor with rare earth magnets forms the exterior of the motor, which can be fitted with a wheel tire to realize the direct drive for each wheel of an EV. The interior stator with its windings is rigidly mounted onto the suspension and frame structure of the vehicle. In order to achieve the direct drive without any mechanical transmission for EVs, the wheel motor has been designed as a low-speed high-torque motor. The design and optimization of the motor geometry was achieved with the aid of finite-element electromagnetic field analysis. Simulation studies on the transient performance of the motor drive were also carried out. This involved the creation of the motor transient model and formulation of a motor control strategy to ensure the wheel motor drive runs efficiently in the entire permitted speed and load range. The application of CAD techniques in the design of this very unconventional drive is described in this paper     

A Generalized Technique for Register Counting and its Application to Cost-Optimal DSP Architecture Synthesis

In this paper we propose a generalized technique to count the required number of registers in a schedule which supports overlapped scheduling and can be applied to the case where a general digit-serial data format is used. This technique is integrated into an integer linear programming (ILP) model for time-constrained scheduling. In the ILP model, appropriate processors of certain data formats are chosen from a library of processors and data format converters are automatically inserted between processors of different data formats if necessary. Then the required number of registers for each data format is evaluated correctly by the proposed technique. Hence an optimal architecture for a given digital signal processing algorithm is synthesized where the cost of registers as well as the cost of processors and data format converters are minimized. It is shown that by including the cost of registers in the synthesis task as proposed in this paper leads to up to 12.8% savings in the total cost of the synthesized architecture when compared with synthesis performed without including the register cost in the total cost.     

提高E^2PROM中NMOS管源漏穿通电压的实验研究

为了提高Ｅ＾２ＰＲＯＭ中Ｎ管源漏穿通电压，用实验的方法对制造工艺进行了研究。结果表明，高能量注入是提高ＶＰＴ的有效手段，但受到ｐｎ结击穿的限制，只适用于低区短沟Ｎ管；ＤＤＤ工艺大幅度高ＶＰＴ，但ｐｎ结击穿电压低于２０Ｖ，不能应用于高压ＭＯＳ管；采用适量的防穿通注入和适当增大沟道长度为最理想的工艺途径。     

Transformation Behaviour of Austenite in Steel under Condition of Stress-strain and Its Application

Austenite can be retained at ambient temperature in steels by alloying and processing control. The transformation from austenite to martensite occurs under a certain conditions : thermal or deformation. Stress-strain induced martensitic transformation is important to improve the plasticity of steels which is called transformation induced plasticity (TRIP). Strength-ductility balance of the steels is greatly superior to that of other high strength steels due to the TRIP effect. A new type of steels-TRIP steel is developed     

Prevention of musculoskeletal disorders at work: Validation and reliability in a multicenter intervention study

During the years 1986–1989 The Finnish Work Environment Fund initiated a multicenter, intervention study (programme) to prevent musculoskeletal disorders at work. The programme consisted of four different projects comprising methodological, epidemiological, and interventive themes. The main results were as follows: (1) More than half of the occupational physiotherapists and physicians involved in the project felt that they did not have adequate training for testing the performance capacity of the musculoskeletal system. Several of the most commonly used musculoskeletal tests had either poor validity in predicting future musculoskeletal troubles or had poor reliability. (2) A controlled intervention study showed that active training of neck-shoulder muscles can prevent musculoskeletal troubles, even more than ergonomic actions. (3) It is possible to reduce sick-leave due to low-back disorders by intervention measures directed toward both the work (environment, tools) and the workers (working methods, positive attitude to work, preparedness to keep fit). (4) The identification of ergonomic hazards with the help of teamwork proved to be feasible. The practical improvements, however, were difficult to implement in the prevailing conditions. Some of the improvements increased the work load and the stress of the workers. This aspect needs further consideration.     

A fast digital Radon transform—An efficient means for evaluating the Hough transform

A fast digital Radon transform based on recursively defined digital straight lines is described, which has the sequential complexity of N² log N additions for an N × N image. This transform can be used to evaluate the Hough transform to detect straight lines in a digital image. Whilst a parallel implementation of the Hough transform algorithm is difficult because of global memory access requirements, the fast digital Radon transform is vectorizable and therefore well suited for parallel computation. The structure of the fast algorithm is shown to be quite similar to the FFT algorithm for decimation in frequency. It is demonstrated that even for sequential computation the fast Radon transform is an attractive alternative to the classical Hough transform algorithm.     

离子交换法合成三氨基胍叠氮酸盐

三氨基胍叠氮酸（ＴＡＺ）分子中的含氮量高达８５．７％，燃烧分解时不仅－Ｎ３可释放３６７ｋＪ／ｍｏｌ的键能，而且放出大量的氮气，是一个提高比冲，降低燃烧温度的理想的推进剂两组分之一。