转炉脱磷效果影响因素分析

从氧气顶吹转炉脱磷的热力学分析入手,探讨了冶炼过程中温度、炉渣碱度、(FeO)对磷含量的影响,回磷的原因、影响因素及防止措施等,指出应控制炉渣碱度、终点温度、(FeO)在合理范围内,应重视钢水回磷问题。     

复杂连通区域扫描线填充算法的问题及改进

针对复杂连通区域扫描线填充算法可能出现的重复填充错误，分析了产生错误的原因，并给出了相应的改进办法．从而实现了复杂连通区域的快速正确填充。     

New bottle but old wine: A research of cyberbullying in schools

This study investigates the nature and the extent of adolescences’ experience of cyberbullying. A survey study of 177 grade seven students in an urban city is conducted. In this paper, “cyberbullying” refers to bullying via electronic communication tools. The results show that almost 54% of the students were victims of traditional bullying and over a quarter of them had been cyber-bullied. Almost one in three students had bullied others in the traditional form, and almost 15% had bullied others using electronic communication tools. Almost 60% of the cyber victims are females, while over 52% of cyber-bullies are males. Majority of the cyber-bully victims and bystanders did not report the incidents to adults.     

剖析全板电镀镍金发白现象

简要介绍了全板电镀镍金加工过程中镀金面发白现象及改善措施。特别是针对高位发白(或粗糙)的产生原因和处理过程进行较为详细的描述,并对工艺在此处理过程中存在问题进行了简要剖析。     

钻井井架力学性能分析

钻井井架作为钻机系统设备中的关键部分,其力学性能直接关系到整套钻机系统的安全生产。文章推导了常用于分析钻井井架力学性能的理论,即线性屈曲、几何非线性和双重非线性理论。提出同时用这三种理论对钻井井架进行综合比较分析,从而合理地预见井架力学性能的方法。以A形钻井井架为例,进行了详细的分析,得到了井架的失稳形式、极限承载、破坏特征及薄弱部位,为钻井井架的设计、优化与评定提供了参考。     

Syntheses and Structural Characterization of Triorganotin Derivatives of Bis(carboxymethyl)trithiocarbonate: X-ray Crystal Structures of 2D Network Polymers

Six triorganotin(IV) complexes of the type {(R₃Sn)₂[C₃S₃(COO)₂]}_n (R = C₆H₅ 1; n-Bu 2; PhCH₂ 4; p-F-PhCH₂ 5; o-F-PhCH₂ 6) and {(R₃Sn)₂[C₃S₃(COO)₂]}_n·[EtOH] (R = Me 3) have been synthesized by the reaction of bis(carboxymethyl)trithiocarbonate with triorganotin(IV) chloride in the presence of sodium ethoxide. All complexes were characterized by elemental analysis IR, ¹H, ¹³C and ¹¹⁹Sn NMR spectroscopy. Except for 4–6, all complexes were also characterized by X-ray crystallography. The X-ray date revealed that complexes 1–3 show two-dimensional network polymeric structure in which the geometries of tin atoms are trigonal bipyramid with the axial positions occupied by carboxylic oxygen atoms.     

过程控制级模拟轧钢系统的研制及在热轧试车中的应用

宝钢集团上海第一钢铁有限公司(后面简称一钢)新建的不锈钢工程1780热轧项目中,为了能在较短周期内完成所有的应用软件开发与测试任务,特别研制了模拟轧钢功能。本论文主要阐述利用计算机的集成思想,结合热轧工艺,来开发模拟轧钢功能,以及利用模拟轧钢进行现场各种情况的模拟测试。     

以加入WTO为契机 提高国土资源管理水平

以加入世贸组织为契机 ,加强资源战略研究 ,抓好管理重点 ,为“工业强省”提供国土资源支持。规范市场 ,处理好 5种关系 ,全面清理法规、规章、政策 ,转变政府职能     

一种VSAT数据通信网络报文传输协议的分析

本文描述并分析了一种适用于多信道ＶＳＡＴ卫星数据通信网的报文传输协议，特别是考虑了无线信道误码率对传输协议的影响，分析表明利用Ｓ－ＲＥ－ＡＬＯＨＡ作为预订信道的多址方式及按报文占用数据信道方法可以减小报文传输延时并增加系统吞吐量。     

Rapid synthesis of La0.7Sr0.3MnO3+λ catalysts by microwave irradiation process

Microwave irradiation processing (MIP) was considered as a potential method to synthesize perovskite-type oxides rapidly, cleanly and energy-efficiently. In this paper, La_0.7Sr_0.3MnO_3+λ, a kind of promising catalyst for automobile exhaust purification, was successfully prepared by MIP in not more than 5 min. The sol–gel method was also used for comparison. All the samples were evaluated by catalytic activity tests in the simulated exhaust and characterized by XRD, BET, TEM and XRF analyses. The results showed that the integrated perovskite-type phase and uniform particle size were obtained in the microwave-treated samples. And those ones exhibited a better oxidation activity under slightly oxygen-rich condition than that by sol–gel method, which may be related to more A-site cation vacancies and larger bulk oxygen content generated in MIP. Possible formation mechanism of perovskites in MIP was also discussed.