Sulfur bonding in MoS2 and Co-Mo-S structures

The structure and bonding in small MoS₂ structures with and without Co is studied theoretically using self-consistent density functional theory with a non-local exchange-correlation energy. The structures model the catalysts used extensively in hydrotreating. We study in detail the structure and binding energies as a function of the amount of sulfur. The calculations show that extensive reconstructions occur at the two types of MoS₂ edges where the sulfur dimerizes and occupies non-lattice positions. These structures are shown to be in good agreement with available experimental data. We also study the energy required to form sulfur vacancies, which are believed to be the active sites for many hydrotreating reactions. The presence of Co atoms at the edges is shown to lead to a significant lowering of the metal-sulfur binding energy. This imposes an increase in the concentration of active sites for the reactions and may thus explain the promoting effect of Co. This revised version was published online in July 2006 with corrections to the Cover Date.     

Cui bono? — Ziele und Inhalte eines Datenschutz-Zertifikats

Um ein Datenschutz-Zertifikat zur Best?tigung eines hohen Datenschutz-Niveaus erfolgreich zu etablieren, müssen die Randbedingungen stimmen. Ausgehend vom Informationsbedarf m?glicher Zielgruppen an ein solches Zertifikat begründet der Beitrag die Datenschutzorganisation als Prüfgegenstand und stellt die aus der Sicht der Autoren wichtigsten Inhalte der Prüfung vor.     

A Generalized System for Photo-Responsive Membrane Rupture in Polymersomes

Polymersomes are vesicles whose membranes are comprised of self-assembled block co-polymers. We recently showed that co-encapsulating conjugated multi-porphyrin dyes in a polymersome membrane with ferritin protein in the aqueous lumen confers photo-lability to the polymersome. In the present study, we illustrate that the photo-lability can be extended to vesicles containing dextran, an inert and inexpensive polysaccharide, as the luminal solute. Here we explore how structural features of the polymersome/porphyrin/dextran composite affect its photo-response. Increasing dextran molecular weight, decreasing block copolymer molecular weight, and altering fluorophore-membrane interactions results in increasing the photo-responsiveness of the polymersomes. Amphiphilic interactions of the luminal encapsulant with the membrane coupled with localized heat production in the hydrophobic bilayer likely cause differential thermal expansion in the membrane and the subsequent membrane rupture. This study suggests a general approach to impart photo-responsiveness to any biomimetic vesicle system without chemical modification, as well as a simple, bio-inert method for constructing photo-sensitive carriers for controlled release of encapsulants.     

Spectrally resolved white-light interferometry for measurement of ocular dispersion.

Spectrally resolved white-light interferometry was used to measure the wavelength dependence of refractive index (i.e., dispersion) for various ocular components. Verification of the technique's efficacy was substantiated by accurate measurement of the dispersive properties of water and fused silica, which have both been well-characterized in the past by single-wavelength measurement of the refractive index. The dispersion of bovine and rabbit aqueous and vitreous humors was measured from 400 to 1100 nm. In addition, the dispersion was measured from 400 to 700 nm for aqueous and vitreous humors extracted from goat and rhesus monkey eyes. An unsuccessful attempt was also made to use the technique for dispersion measurement of bovine cornea and lens. The principles of white-light interferometry, including image analysis, measurement accuracy, and limitations of the technique, are discussed. In addition, alternate techniques and previous measurements of ocular dispersion are reviewed.     

Flow conditions of fresh mortar and concrete in different pipes

The variation in fresh concrete flow rate over the pipe cross section was investigated on differently coloured and highly flowable concrete mixes flowing through pipes of different materials (rubber, steel, acryl). First, uncoloured (gray) concrete was poured through the pipe and the pipe blocked. Similar but coloured (black) concrete was then poured into the pipe filled with gray concrete, flowing after the gray concrete for a while before being blocked and hardened. The advance of the colouring along the pipe wall (showing boundary flow rate) was observed on the moulded concrete surface appearing after removing the pipe from the hardened concrete. The shapes of the interfaces between uncoloured and coloured concrete (showing variation of flow rate over the pipe cross section) were observed on sawn surfaces of concrete half cylinders cut along the length axes of the concrete-filled pipe. Flow profiles over the pipe cross section were clearly seen with maximum flow rates near the centre of the pipe and low flow rate at the pipe wall (typically rubber pipe with reference concrete without silica fume and/or stabilizers). More plug-shaped profiles, with long slip layers and less variation of flow rate over the cross section, were also seen (typically in smooth acrylic pipes). Flow rate, amount of concrete sticking to the wall after flow and SEM-images of pipe surface roughness were observed, illustrating the problem of testing full scale pumping.     

Behavior of tissue-engineered human cartilage after transplantation into nude mice

Cartilage lacks the ability to regenerate structural defects. Therefore, autologous grafting has been used routinely to replace cartilaginous lesions. Because tissue engineering of human cartilage with the help of bioresorbable polymer scaffolds is possible in experimental models, the demand for the clinical application grows. In this study we present an analysis of the behavior of transplants made of human chondrocyte pools, agarose and the resorbable polymer scaffold Ethisorb and a preliminary comparison with transplants made of single patients' cells and Ethisorb but without the additional ingredient agarose. Chondrocytes were isolated from the matrix of human septal cartilage by enzymatic digestion. The pool cells were kept in monolayer culture for 2 weeks, the single patients' cells for 3–4 weeks. Chondrocyte pools were suspended in agarose and seeded into the resorbable polymer scaffold Ethisorb. Single patients' cells were seeded without agarose. All cell–polymer constructs were kept in perfusion culture for 10–14 days and transplanted subcutaneously into thymusaplastic nude mice. Additionally we implanted Ethisorb fleeces embedded in agarose without chondrocytes. After 6, 12 and 24 weeks the animals were sacrificed and the specimens were explanted and analyzed histochemically and immunohistochemically. Polymer scaffolds not seeded with chondrocytes did not show cartilage formation. Resorption was complete after 12 weeks in vivo. Transplants from cell pools remained mechanically stable over 24 weeks apart from four transplants that were resorbed completely. Cartilage formation was observed in all pool-specimens with the presence of chondronic structures and a homogeneous matrix containing hyaline cartilage-specific matrix molecules such as collagen type II. Single patients' transplants showed hyaline cartilage matrix synthesis and mechanical stability as well. Chondrocyte pools are a suitable method to study cartilage engineering of human cells in vitro and in vivo in experimental models. Under clinical conditions it is, however, necessary to study the generation of cartilage from single patients' cells. We showed that it is possible without additional ingredients such as agarose. However, variations in the preliminary results show that the clinical application with human cells is more difficult than one would expect when using human chondrocyte pools. Further studies need to be performed to find out which individual factors influence the in vitro engineered cartilage's fate in vivo. © 1999 Kluwer Academic Publishers     

Approximate model matching for non-linear control systems

Approximate model matching refers to the problem of controlling a non-linear system so as to achieve a response resembling that of a desirable model. The paper presents a family of recursive output feedback controllers that can achieve approximate model matching in all cases where it is possible. The design of these controllers depends on the solution of a set of algebraic inequalities.     

Highlights of Drought Policy and Related Science in Australia and the U.S.A.

Abstract

Patterns of water supply and use in Australia and the U.S.A. differ in many ways. This results in different perceptions concerning the nature of drought and policy approaches to its management. This paper discusses the differences and similarities and explores lessons that policy makers in both countries can learn from one another. A key difference between the two countries is that whereas drought is perceived in Australia essentially in terms of its impact on agriculture, in the U.S. both perceptions and policy are also heavily influenced by the impact of drought on urban communities. This has led to different policy emphases. In 1992 Australia established its National Drought Policy; the U.S. is presently considering the adoption of a national drought policy. These policies highlight drought being accepted as part of natural climate variability, rather than as a natural disaster. They also emphasize the protection of the natural resource base.