PbS and CdS Quantum Dot‐Sensitized Solid‐State Solar Cells: “Old Concepts,New Results”

Lead sulfide (PbS) and cadmium sulfide (CdS) quantum dots (QDs) are prepared over mesoporous TiO₂ films by a successive ionic layer adsorption and reaction (SILAR) process. These QDs are exploited as a sensitizer in solid‐state solar cells with 2,2′,7,7′‐tetrakis(N,N‐di‐p‐methoxyphenylamine)‐9,9′‐spirobifluorene (spiro‐OMeTAD) as a hole conductor. High‐resolution transmission electron microscopy (TEM) images reveal that PbS QDs of around 3 nm in size are distributed homogeneously over the TiO₂ surface and are well separated from each other if prepared under common SILAR deposition conditions. The pore size of the TiO₂ films and the deposition medium are found to be very critical in determining the overall performance of the solid‐state QD cells. By incorporating promising inorganic QDs (PbS) and an organic hole conductor spiro‐OMeTAD into the solid‐state cells, it is possible to attain an efficiency of over 1% for PbS‐sensitized solid‐state cells after some optimizations. The optimized deposition cycle of the SILAR process for PbS QDs has also been confirmed by transient spectroscopic studies on the hole generation of spiro‐OMeTAD. In addition, it is established that the PbS QD layer plays a role in mediating the interfacial recombination between the spiro‐OMeTAD⁺ cation and the TiO₂ conduction band electron, and that the lifetime of these species can change by around 2 orders of magnitude by varying the number of SILAR cycles used. When a near infrared (NIR)‐absorbing zinc carboxyphthalocyanine dye (TT1) is added on top of the PbS‐sensitized electrode to obtain a panchromatic response, two signals from each component are observed, which results in an improved efficiency. In particular, when a CdS‐sensitized electrode is first prepared, and then co‐sensitized with a squarine dye (SQ1), the resulting color change is clearly an addition of each component and the overall efficiencies are also added in a more synergistic way than those in PbS/TT1‐modified cells because of favorable charge‐transfer energetics.     

Autonomous community construction and coordination technology to achieve real-time transmission in multiple emergencies’ situation

Wireless Sensor Network (WSN) is used in Emergency Management System (EMS). If emergency situation happens, real-timely transmitting emergency information in dynamically changing environment should be assured. But this requirement could not be satisfied by conventional approaches which are based on static situation and centralized management. In this paper, to satisfy this requirement, autonomous community construction technology is proposed for single emergency. Emergency information could be transmitted in community and protected from interference of other information’s transmission. Moreover, autonomous coordination technology is proposed for multiple emergencies’ information’s transmission. Via this technology, each emergency could have its individual route to transmit emergency information. Each emergency information’s transmission will not influence with each other. Evaluation results are provided to demonstrate the improvement.     

Low temperature annealing of metals with electrical wind force effects

Conventional annealing is a slow, high temperature process that involves heating atoms uniformly, i.e., in both defective and crystalline regions. This study explores an electrical alternative for energy efficiency,where moderate current density is used to generate electron wind force that produces the same outcome as the thermal annealing process. We demonstrate this on a zirconium alloy using in-situ electron back scattered diffraction(EBSD) inside a scanning electron microscope(SEM) and juxtaposing the results with that from thermal annealing. Contrary to common belief that resistive heating is the dominant factor, we show that 5 × 10~4 A/cm~2 current density can anneal the material in less than 15 min at only135?C. The resulting microstructure is essentially the same as that obtained with 600?C processing for360 min. We propose that unlike temperature, the electron wind force specifically targets the defective regions, which leads to unprecedented time and energy efficiency. This hypothesis was investigated with molecular dynamics simulation that implements mechanical equivalent of electron wind force to provide the atomistic insights on defect annihilation and grain growth.     

Cyclobutanones as markers for irradiated samples of Brie and Camembert cheese

The feasibility of applying a chemical method based on the formation of 2-alkylcyclobutanone to samples of irradiated soft cheese (Brie and Camembert) was investigated. Significant quantities of 2-dodecylcyclobutanone (DCB) and 2-tetradecylcyclobutanone (TCB) were detected in both types of irradiated cheese and are proposed as qualitative markers. Other members of the cyclobutanone family (decyl- and tetradecenyl-) are also thought to be present but could not be substantiated due to a lack of authentic standards. These compounds were absent from the unirradiated samples. Results also show a significant linear relationship between the irradiation dose (1 to 8 kGy) and the amount of DCB and TCB detected in the cheese.     

Parboiling of rice. Part I: Effect of hot soaking time on quality of milled rice

This study investigated the effect of soaking time on the quality of parboiled rice. The paddy was soaked in water at 25 and 80 °C for 15, 30, 45, 60 and 120 min. The soaked paddy was steamed, dried, stored and milled. With increasing soaking time a significant increase in water absorption and milling and head rice yield (hence reduction in broken rice) was observed. A significant difference in milling yield, at the 1% level, was obtained between the raw rice control and the hot soaked parboiled samples. A large reduction in fissured grain was observed after soaking. It is suggested that parboiling fills the void spaces and cements the cracks inside the endosperm, making the grain harder and minimizing internal fissuring and thereby breakage during milling.     

Behavior-change trials to assess the feasibility of improving complementary feeding practices and micronutrient intake of infants in rural Bangladesh

This study used simple rapid-assessment techniques to test the feasibility of increasing the consumption of complementary foods by infants by asking mothers to increase meal quantity or frequency or by altering the viscosity/energy density of the food. The feasibility of using micronutrient supplements either added directly to food or administered as liquid drops was also examined. The study was conducted in rural Bangladesh and involved four separate short-term behavioral change trials. Depending on the trial, fieldworkers recruited 30 to 45 infants 6 to 12 months of age. Following recommendations to increase the amount of food provided to infants, the mean intakes from single meals increased from 40 +/- 23 g on day 1 to 64 +/- 30 g on day 7 (p < 0.05). In a second trial, the mean meal frequency increased from 2.2 +/- 1.3 on day 1 to 4.1 +/- 1.3 on day 7 (p < 0.05). Provision of high-energy-density diets, prepared by decreasing viscosity with alpha-amylase or by hand-mashing rice and dhal into a paste before feeding, increased single-meal energy consumption from 54 +/- 35 kcal to 79 +/- 52 kcal or 75 +/- 37 kcal (p < 0.05), respectively. Both types of micronutrient supplements were well accepted and used according to recommendations. In conclusion, it was possible to change short-term child-feeding behaviors to promote increased food intake, mealfrequency, energy density, and micronutrient consumption. Because each of these interventions lasted for only about 1 week, however, the long-term sustainability of these changes is not known. Moreover, the effect of increased feeding of complementary foods on intakes of breastmilk and total daily consumption of energy and nutrients requires further study.     

Ageing-induced solubility loss in milk protein concentrate powder: effect of protein conformational modifications and interactions with water

BACKGROUND: Protein conformational modifications and water‐protein interactions are two major factors believed to induce instability of protein and eventually affect the solubility of milk protein concentrate (MPC) powder. To test these hypotheses, MPC was stored at different water activities (a_w 0.0–0.85) and temperatures (25 and 45 °C) for up to 12 weeks. Samples were examined periodically to determine solubility, change in protein conformation by Fourier transform infrared (FTIR) spectroscopy and water status (interaction of water with the protein molecule/surface) by measuring the transverse relaxation time (T₂) with proton nuclear magnetic resonance (¹H NMR). RESULTS: The solubility of MPC decreased significantly with ageing and this process was enhanced by increasing water activity (a_w) and temperature. Minor changes in protein secondary structure were observed with FTIR which indicated some degree of unfolding of protein molecules. The NMR T₂ results indicated the presence of three distinct populations of water molecules and the proton signal intensity and T₂ values of proton fractions varied with storage condition (humidity) and ageing. CONCLUSION: Results suggest that protein/protein interactions may be initiated by unfolding of protein molecules that eventually affects solubility. Copyright © 2011 Society of Chemical Industry     

Premarin Reduces Neurodegeneration and Promotes Improvement of Function in an Animal Model of Spinal Cord Injury

Spinal cord injury (SCI) causes significant mortality and morbidity. Currently, no FDA-approved pharmacotherapy is available for treating SCI. Previously, low doses of estrogen (17β-estradiol, E2) were shown to improve the post-injury outcome in a rat SCI model. However, the range of associated side effects makes advocating its therapeutic use difficult. Therefore, this study aimed at investigating the therapeutic efficacy of Premarin (PRM) in SCI. PRM is an FDA-approved E2 (10%) formulation, which is used for hormone replacement therapy with minimal risk of serious side effects. The effects of PRM on SCI were examined by magnetic resonance imaging, immunofluorescent staining, and western blot analysis in a rat model. SCI animals treated with vehicle alone, PRM, E2 receptor antagonist (ICI), or PRM + ICI were graded in a blinded way for locomotor function by using the Basso–Beattie–Bresnahan (BBB) locomotor scale. PRM treatment for 7 days decreased post-SCI lesion volume and attenuated neuronal cell death, inflammation, and axonal damage. PRM also altered the balance of pro- and anti-apoptotic proteins in favor of cell survival and improved angiogenesis and microvascular growth. Increased expression of estrogen receptors (ERs) ERα and ERβ following PRM treatment and their inhibition by ER inhibitor indicated that the neuroprotection associated with PRM treatment might be E2-receptor mediated. The attenuation of glial activation with decreased inflammation and cell death, and increased angiogenesis by PRM led to improved functional outcome as determined by the BBB locomotor scale. These results suggest that PRM treatment has significant therapeutic implications for the improvement of post-SCI outcome.