强背景噪声环境下的线性调频信号检测

基于线性调频(LFM)信号Wigner-Ville变换的零频处仍保存原信号所有信息的结论，提出了改进的基于互Wigner-Ville分布线性调频信号的检测方法。该方法具有较好的抗噪声能力，在更低的信噪比下，可以实现单个或多个强度相差较大的线性调频信号的检测。仿真实验的结果证明了算法的有效性。     

FFI4SoC: a Fine-Grained Fault Injection Framework for Assessing Reliability against Soft Error in SoC

Recently, system-on-chips (SoCs) are increasingly employed in reliable applications for their high-performance and high-densities. Moreover, the structure shrinking of SoC leads to its proneness to radiation-induced soft errors. This paper presents a fine-grained fault injection framework for SoC (FFI4SoC) to assess the reliability of SoC against soft errors. FFI4SoC facilitates fault injection for SoC by defining the primary components and rules that are required by fine-grained fault injection. Furthermore, based on FFI4SoC, we develop a fine-grained fault injection tool named SSIFFI for bare-metal MicroZed. The design of SSIFFI is presented in order to illustrate the application of FFI4SoC. Finally, SSIFFI is engaged in simulated fault injection experiments to explore the cause of single event functional interrupts (SEFIs) and to validate functional properties of FFI4SoC. The experimental results disclose detailed reasons for SEFI and prove that FFI4SoC can be employed to assess reliability of SoC well with the merit of fine-grained injection.     

The Edge Effects Boosting Hydrogen Evolution Performance of Platinum/Transition Bimetallic Phosphide Hybrid Electrocatalysts

Platinum (Pt) is regarded as a promising electrocatalyst for hydrogen evolution reaction (HER). However, its application in an alkaline medium is limited by the activation energy of water dissociation, diffusion of H⁺, and desorption of H*. Moreover, the formation of effective structures with a low Pt usage amount is still a challenge. Herein, guided by the simulation discovery that the edge effect can boost local electric field (LEF) of the electrocatalysts for faster proton diffusion, platinum nanocrystals on the edge of transition metal phosphide nanosheets are fabricated. The unique heterostructure with ultralow Pt amount delivered an outstanding HER performance in an alkaline medium with a small overpotential of 44.5 mV and excellent stability for 80 h at the current density of −10 mA cm⁻². The mass activity of as-prepared electrocatalyst is 2.77 A mg⁻¹_Pt, which is 15 times higher than that of commercial Pt/C electrocatalysts (0.18 A mg⁻¹_Pt). The density function theory calculation revealed the efficient water dissociation, fast adsorption, and desorption of protons with hybrid structure. The study provides an innovative strategy to design unique nanostructures for boosting HER performances via achieving both synergistic effects from hybrid components and enhanced LEF from the structural edge effect.     

Tough Transient Ionic Junctions Printed with Ionic Microgels

Emerging soft ionotronics better match the human body mechanically and electrically compared to conventional rigid electronics. They hold great potential for human-machine interfaces, wearable and implantable devices, and soft machines. Among various ionotronic devices, ionic junctions play critical roles in rectifying currents as electrical p–n junctions. Existing ionic junctions, however, are limited in electrical and mechanical performance, and are difficult to fabricate and degrade. Herein, the design, fabrication, and characterization of tough transient ionic junctions fabricated via 3D ionic microgel printing is reported. The 3D printing method demonstrates excellent printability and allows one to fabricate ionic junctions of various configurations with high fidelity. By combining ionic microgels, degradable networks, and highly charged biopolymers, the ionic junctions feature high stretchability (stretch limit 27), high fracture energy (>1000 Jm⁻²), excellent electrical performance (current rectification ratio >100), and transient stability (degrade in 1 week). A variety of ionotronic devices, including ionic diodes, ionic bipolar junction transistors, ionic full-wave rectifiers, and ionic touchpads are further demonstrated. This study merges ionotronics, 3D printing, and degradable hydrogels, and will motivate the future development of high-performance transient ionotronics.     

Asymmetric “Janus” Biogel for Human-Machine Interfaces

Human-machine interfaces (HMIs) are essential for effective communication between machines and tissues. However, mechanical and biological mismatches, along with weak adhesion between rigid electronic devices and soft tissue, often cause unreliable responses and affect the signal recording of HMIs. In this study, an asymmetrical “Janus” biogel patch with one side firmly adhering to tissues, and the other surface having little adhesion and minimal interactions with surrounding environments has been developed. A series of analytical, mechanical, and electrical tests are performed to investigate the “Janus” biogel patch as a functional and biocompatible HMI. It is found that the gallic acid-modified gelatin adhesive surface on one side exhibits body temperature-dependent tissue adhesion, enabling low modulus and seamless skin contact. The other side is a tough gelatin/glycerol gel layer, which is thermally welded into the adhesive layer and functions as an encapsulant to prevent external interference due to adhesion. The encapsulation layer also exhibits a low friction coefficient when wet and proves to be a reliable alternative barrier to conventional encapsulation materials. The scientific insights and engineering principles revealed in this type of “Janus” biogel will be applicable to a broad range of biomedical applications, such as epidermal adhesive electrodes or skin-adhesive wearable devices.     

Breaking the Responsivity-Bandwidth Trade-Off Limit in GaN Photoelectrodes for High-Response and Fast-Speed Optical Communication Application

Underwater optical communication (UOC) has attracted considerable interest in the continuous expansion of human activities in marine/ocean environments. The water-durable and self-powered photoelectrodes that act as a battery-free light receiver in UOC are particularly crucial, as they may directly face complex underwater conditions. Emerging photoelectrochemical (PEC)-type photodetectors are appealing owing to their intrinsic aqueous operation characteristics with versatile tunability of photoresponses. Herein, a self-powered PEC photodetector employing n-type gallium nitride (GaN) nanowires as a photoelectrode, which is decorated with an iridium oxide (IrO_x) layer to optimize charge transfer dynamics at the GaN/electrolyte interface, is reported. Strikingly, the constructed n-GaN/IrO_x photoelectrode breaks the responsivity-bandwidth trade-off limit by simultaneously improving the response speed and responsivity, delivering an ultrafast response speed with response/recovery times of only 2 µs/4 µs while achieving a high responsivity of 110.1 mA W⁻¹. Importantly, the device exhibits a large bandwidth with 3 dB cutoff frequency exceeding 100 kHz in UOC tests, which is one of the highest values among self-powered photodetectors employed in optical communication system.     

Plasma Enhanced Lithium Coupled with Cobalt Fibers Arrays for Advanced Energy Storage

Construction of high efficiency and stable Li metal anodes is extremely vital to the breakthrough of Li metal batteries. In this study, for the first time, groundbreaking in situ plasma interphase engineering is reported to construct high-quality lithium halides-dominated solid electrolyte interphase layer on Li metal to stabilize & protect the anode. Typically, SF₆ plasma-induced sulfured and fluorinated interphase (SFI) is composed of LiF and Li₂S, interwoven with each other to form a consecutive solid electrolyte interphase. Simultaneously, brand-new vertical Co fibers (diameter: ≈5 µm) scaffold is designed via a facile magnetic-field-assisted hydrothermal method to collaborate with plasma-enhanced Li metal anodes (SFI@Li/Co). The Co fibers scaffold accommodates active Li with mechanical integrity and decreases local current density with good lithiophilicity and low geometric tortuosity, supported by DFT calculations and COMSOL Multiphysics simulation. Consequently, the assembled symmetric cells with SFI@Li/Co anodes exhibit superior stability over 525 h with a small voltage hysteresis (125 mV at 5 mA cm⁻²) and improved Coulombic efficiency (99.7%), much better than the counterparts. Enhanced electrochemical performance is also demonstrated in full cells with commercial cathodes and SFI@Li/Co anode. The research offers a new route to develop advanced alkali metal anodes for energy storage.     

An Efficient One-Arrow-Two-Hawks Strategy Achieves High Efficiency and Stable Batch Variance for Benzodifuran-based Polymer Solar Cells

With the development of organic solar cells (OSCs), the high-performance and stable batch variance are becoming a new challenge for designing polymer donors. To obtain high photovoltaic performance, adopting polymers with high molecular weight as donors is an ordinary strategy. However, the high molecular weight need to subtly control the reaction time and state, inevitably caused batch-to-batch variations. Herein, a strategy of steric effect is applied to benzodifuran (BDF)-based polymer by introducing different positions of Cl atom, producing two polymers PBDFCl-1 and PBDFCl-2. The more twisted side chains conformation not only achieve the control of moderate molecular weight for PBDFCl-2, but also easily form molecular stacking through adopting BDF unit and maintain sufficient polymeric crystallinity. Due to the optimized stacking mode and good blend miscibility, PBDFCl-2-based device exhibitsa more elegant power conversion efficiency (PCE) of 17.00% compared to PBDFCl-1-based device. This is the highest efficiency record for BDF-based binary OSCs. Meanwhile, the PCE device variation of the different molecular weights for PBDFCl-2 is little, indicating the reduction of the batch variation. Therefore, smartly using steric effect of Cl atom in strong crystalline BDF unit can form efficient molecular stacking regulations and realize the coordination of high-performance and stable batch variance.     

Superelastic Carbon Aerogels: An Emerging Material for Advanced Thermal Protection in Extreme Environments

Carbon aerogels (CAs) are desirable for thermal protection in aerospace because of their lightweight and high-temperature insulation characteristic; however, their intrinsic brittleness and flaw sensitivity easily trigger catastrophic failure when resisting high-frequency thermal shocks or complex mechanical stresses. Compression is the predominant load applied on aerogels by aerodynamic pressure and pre-tightening force; therefore, the structural elasticity and exceptional capability to keep thermal performance under impact stress are crucial in deciding the actual availability of aerogels. This review presents the recent progress in newly resilient CAs for thermal protection, focusing on reliable structural stability, thermal stability, and thermal superinsulation property. The influence law of microstructures on heat transfer behaviors is first investigated, followed by construction strategies for adiabatic CAs, emphasizing the recoverable deformability resulting from increased continuity of building blocks from 0D nanoparticles to 1D nanofibers/nanotubes and then to 2D nanosheets. Moreover, the optimization of thermal stability in high-temperature aerobic environments and thermal insulation performance are discussed. Finally, it raises current challenges and further opportunities for CAs toward better properties and brighter prospects.     

基于90nm CMOS工艺的2GS/s 8-bit 折叠插值ADC的设计*

本文基于90nm CMOS工艺设计了一个单通道 2GSPS, 8-bit 折叠插值模数转换器。本设计采用折叠级联结构,通过在折叠电路间增加级间采样保持器的方法增加量化时间。电路中采用了数字前台辅助校正技术以提高信号的线性度。后仿结果表明,在奈奎斯特采样频率,该ADC的微分非线性DNL<±0.3LSB,积分非线性INL<±0.25LSB,有效位数达到7.338比特。包括焊盘在内的整体芯片面积为880×880 μm2。电路在1.2V 电源电压下功耗为210mW.