我国内螺纹铜管的生产技术与发展方向

本文论述了我国内螺纹铜管业生产、工艺、产品技术条件、齿型及市场现状 ,提出了内螺纹铜管的研发方向。     

The changes of lipid metabolism and hemorrheology in intrahepatic cholestasis during pregnancy

OBJECTIVE: To identify the influence of the increased level of serum cholyglycine (CG) on lipid metabolism and hemorrheology in patients with intrahepatic cholestasis during pregnancy (ICP). METHODS: The concentrations of serum CG, total cholesterol (CH), triglycerides (TG), high density lipoprotein-cholesterol (HDL-C), low density lipoprotein-cholesterol (LDL-C), high shear and low shear of blood specific viscosity (HS and LS), plasma specific viscosity (PV) and hematocrit (HCT) were measured in 68 cases of primiparas with single pregnancy and 30 healthy nonpregnant women respectively. The group of ICP was composed of 35 cases with CG > 6 mumol/L, the group of normal pregnancy, 33 cases with CG < 6 mumol/L. RESULTS: The means of CG and the lipidic parameters in the two pregnant groups were significantly higher than those in the non-pregnancy group (P < 0.02-0.001) except the means of HDL-C between the groups of ICP and non-pregnancy. The levels of LDL-C, LDL-C/HDL-C, LS, PV and HCT in the ICP were significantly higher than those in the normal pregnancy group (P < 0.02-0.001). CONCLUSIONS: There are significant changes of lipid metabolism and hemorrheology in patients with ICP. However, these changes could be corrected after pregnancy termination, when the level of serum CG returned to normal. The results suggest that the pathophysiologic changes of ICP are associated with increased level of serum CG.     

高频数字锁相环的研究

论文阐述了１００ＭＨｚ数字锁相环的设计过程，用１０ＭＨｚ晶体振荡器对１００ＭＨｚ数字压控振荡器进行锁相，使１００ＭＨｚ输出信号指标得到很大改善。论文还分析了各单元电路，关键点时域波形测试，频谱测试。     

机械合金化过程中Fe70B30粉末晶粒尺寸和微观应变的研究

用Ｘ射线和电镜研究了Ｆｅ＿（７０）Ｂ＿（３０）粉末经不同时间高能球磨后晶粒尺寸和微观应力的变化。在机械合金化过程中，粉末的Ｘ射线衍射谱的宽度随球磨时间的增加逐渐加宽，这是晶粒细化和内部微观应力共同作用的结果。Ｘ射线衍射结果表明：随着机械合金化的进行，粉末的晶粒尺寸逐渐减小，球磨初期晶粒尺寸下降较快，经１５ｈ球磨，晶粒尺寸为２５ｎｍ，机械合金化进行到一定时间后晶粒尺寸下降缓慢，８０ｈ球磨后晶粒尺寸可达５ｎｍ。在机械合金化过程中球磨所造成的微观应变不大，球磨初期粉末的内应力随球磨时间增加而增加，当粉末粒子尺寸很小时，随球磨的进行粉末中的微观应变显著下降。     

TiAl基合金表面改性对高温抗氧化性的影响

研究了渗碳处理ＴｉＡｌ基合金试样的高温氧化行为，发现渗碳处理可以在ＴｉＡｌ基合金试样表层形成致密的多层结构的渗碳层，并发生表层Ａｌ、Ｔｉ重新分配。致密的渗碳层具有良好的高温抗氧化性和高温热稳定性，同时，Ｔｉ、Ａｌ重新分配形成的富Ａｌ最外层也能进一步提高合金的抗氧化性。     

Mesopore development in PAN-ACF resulting from non-metal additives

The narrow pore-size distribution of activated carbon fibres (ACF) limits their application in the fields concerning larger molecules, such as liquid adsorption and catalyst support. On the addition of carbon particles and organic materials to polyacrylonitrile fibres, and after stabilizing and activating, the mesoporosity in the resultant ACF has been obviously increased. Among these additives, carbon black gives the best effect. With 1 wt% carbon black I in precursor and on activating at 880°C for 30 min, a mesoporosity of 48.2% (total pore volume 0.704 ml g-1, mesopore volume 0.340 ml g-1) has been obtained. The mechanism of mesopore formation is also discussed. This revised version was published online in November 2006 with corrections to the Cover Date.     

注聚采出水分离用动态水力旋流器特性研究

原有的地面工艺和设备已不能满足聚合物驱采出水分离的要求。采用自行研制的动态水力旋流器，在增压与不增压两种工艺流程下，分别进行了流量和转数对分离效率的影响、转数与压力降的关系，以及入口压力与处理量的关系等项试验研究。试验结果表明，与静态水力旋流器相比，动态水力旋流器的分离效率明显提高，一般可提高10％左右；压力损失显著降低，约可减少0．1MPa，足见可在低压下工作，易于实现无泵运行；无泵运行明显比有泵增压运行的分离效率高，但处理量会有所降低。将动态水力旋流器应用于聚合物驱产出水的油－水分离处理是完全可行的。     

提高超小型铝电解电容器生产一次合格率

恰当选择原材料、确保铆接工序质量、重视工作电解液的配比、严控各工序成品率是提高超小型铝电解电容器投入产出一次合格率的关键。以１０Ｖ－４７μＦ（４ｍｍ×７ｍｍ）产品为例，投入产出一次合格率达９４％以上。     

直流电动机参数测定

根据直流电机的可逆原理并利用常规的实验仪表，可以简便、准确地测出直流电动机的主要参数－电磁转矩、输出转矩和效率．     

复合栅控二极管新技术提取热载流子诱生的NMOS/SOI器件界面陷阱的横向分布

提出了用复合栅控二极管新技术提取MOS/SOI器件界面陷阱沿沟道横向分布的原理,给出了具体的测试步骤和方法.在此基础上,对具有体接触的NMOS/SOI器件进行了具体的测试和分析,给出了不同的累积应力时间下的界面陷阱沿沟道方向的横向分布.结果表明:随累积应力时间的增加,不仅漏端边界的界面陷阱峰值上升,而且沿沟道方向,界面陷阱从漏端不断向源端增生.