Comparison of the lymphatic transport of radiolabeled 1,3-dioleoylglycerol and trioleoylglycerol in rats

It has been reported that, compared with TAG, DAG suppresses postprandial hypertriacylglycerolemia and reduces visceral fat levels in experimental animals and humans. To clarify the mechanism responsible for these beneficial effects, we compared the lymphatic transport of 1,3-DAG, a major isomer of DAG, and TAG in rats. Male SD rats, after insertion of a cannula into the thoracic duct, were given 1,3-di[1-¹⁴C]oleoylglycerol or tri[1-¹⁴C]oleoylglycerol via a stomach tube. The 24-h receovery of the radioactivity from 1,3-di[¹⁴C]oleoylglycerol in the lymph was slightly but significantly lower than that from tri[¹⁴C]oleoylglycerol (81.3±1.0 vs. 86.5±1.2%, respectively). However, in the first 1-h interval after administration, the recovery of radioactivity from 1,3-dioleoylglycerol was almost half of that from trioleoylglycerol (17.5±2.0 vs. 31.1±1.4%). The amount of TAG and phospholipids secreted into the lymph was significantly lower 1 h after the administration of 1,3-dioleoylglycerol compared with that after the administration of trioleoylglycerol. More than 90% of the radioactivity recovered in the lymph in the first 3 h was distributed in the TAG fraction for both 1,3-dioleoylglycerol and trioleoylglycerol. These results suggest that slower lymphatic transport of 1,3-DAG compared with TAG could be a factor in the suppression of postprandial hypertriacylglycerolemia. The possibility that the slower lymphatic transport of DAG contributes to the antiobesity action observed in the feeding of 1,3-DAG cannot be excluded.     

Simulation of characteristics of a SiO2/c-axis-oriented LiNbO3/diamond surface acoustic wave

High-frequency surface acoustic wave (SAW) devices based on diamond that have been realized to date utilize c-axis-oriented ZnO as the piezoelectric thin film. This material, with SiO2 overlay, shows excellent characteristics of a high phase velocity of over 10,000 m/s and a zero temperature coefficient, and it has been successfully applied to high-frequency SAW filters and resonators. To expand on materials used on diamond, the theoretical calculation has been carried out for LiNbO3/diamond, and a high electromechanical coupling coefficient up to 9.0% is expected. In this work, the characteristics of SiO2/LiNbO3/diamond were studied by computer simulation, emphasizing a zero temperature coefficient with a high coupling coefficient. Calculations are carried out for the phase velocity, the electromechanical coupling coefficient, and the temperature coefficient of the Rayleigh wave and its higher mode Sezawa wave. As a result, SiO2/IDT/LiNbO3/diamond is found to offer a zero temperature coefficient with a very high coupling coefficient up to 10.1% in conjunction with a high phase velocity of 12,100 m/s.     

Optical topography: practical problems and new applications

We will briefly review the present status of optical topography and then discuss the method of improving practicality, i.e., the signal-to-noise (S/N) ratio and the spatial resolution in observations of higher-order brain functions. The optimum wavelength pair improved the S/N ratio sixfold for deoxyhemoglobin, and new configurations of light irradiation and detection positions doubled the spatial resolution. We also report on developing application fields of optical topography. This modality will bridge the gap between natural sciences, neuroscience, and pedagogy, and show actual real-time brain activity.     

Chemicofunctional membrane for integrated chemical processes on a microchip

Here we report a design and synthesis of a chemically functional polymer membrane by an interfacial polycondensation reaction and multilayer flow inside a microchannel. Single and parallel dual-membrane structures are successfully prepared by using organic/aqueous two-layer flow and organic/aqueous/organic three-layer flow inside the microchannel followed by an interfacial polycondensation reaction. By using the inner-channel membrane, permeation of ammonia species through the inner-channel membrane is successfully achieved. Furthermore, horseradish peroxidase is immobilized on one side of the membrane surface to integrate the chemical transform function onto the inner-channel membrane. Here substrate permeation through the membrane and subsequent chemical transformation at the membrane surface are realized. The polymer membrane prepared inside the microchannel has an important role in ensuring stable contact of different phases such as gas/liquid or liquid/ liquid and the permeation of chemical species through the membrane. Furthermore, membrane surface modification chemistry allows chemical transformation of permeated chemical species. These methods are expected to lead to development of complicated and sophisticated chemical systems involving membrane permeation and chemical reactions.     

Preparation of porous sheet composite impregnated with TiO<Subscript>2</Subscript> photocatalyst by a papermaking technique

Titanium dioxide (TiO₂) powder-containing sheet composites, called TiO₂ sheet, were prepared by a papermaking technique, and their photocatalytic efficiency was investigated. The TiO₂ powders were homogeneously scattered over the fiber-mix networks tailored within the catalyst sheet. Under UV irradiation, the TiO₂ paper could decompose p-hydroxyacetophenone (p-HAP), although the degradation efficiency by the TiO₂ sheet was lower than that by the TiO₂ powder. Scanning electron microscopy revealed that coverage of the TiO₂ particles inside the sheet by alumina binder which was used to improve the sheet strength caused the deterioration of the photocatalytic performance. Internal addition of alumina binder made the TiO₂ sheet porous and such a TiO₂ sheet exhibited high photocatalytic performance equivalent to that of TiO₂ powder. The porous structure of TiO₂ sheet might contribute to effective transport of p-HAP to the surface of TiO₂ particles inside the sheet, resulting in high degradation performance. In addition, TiO₂ sheet prepared using TiO₂ sol showed higher photocatalytic efficiency than TiO₂ powder and it was indicated that the porous sheet structure might provide suitable conditions for TiO₂ catalysis for photodecomposition.     

Preparation of carbon microparticle assemblies from phenolic resin using an inverse opal templating method

Three-dimensionally (3D) well-ordered carbon microparticle assemblies with different particle morphologies were fabricated by infiltration of phenolic resin solution into SiO₂ inverse opal structures and subsequent carbonization. The effect of the phenolic resin solution concentration and the carbonization temperature on the morphology of the fabricated carbon microparticles was investigated. At a carbonization temperature of 1000 °C, carbon microparticles with interlocked bridges were obtained when the concentration of phenolic resin solution is 40 wt% and hollow carbon microparticles with opened window channels were obtained at a concentration of 30–35 wt%. When the carbonization temperature was decreased to 500 °C, carbon microparticles with interlocked bridges also were observed, even when the phenolic resin concentration was 30 wt%. The structures and properties of the carbon microparticles and their assemblies were characterized using SEM, XRD, and N₂ adsorption.     

Disintegration process of yttria-stabilized zirconia ceramics using hydrothermal conditions

Capability of the recycling of high strength and high fracture toughness yttria-stabilized tetragonal zirconia polycrystalline (Y-TZP) sintered body utilizing “low-temperature annealing degradation” phenomenon was investigated. Hydrothermal treatment was employed to induce the phase transformation from tetragonal to monoclinic zirconia and to disintegrate the Y-TZP sintered body. 3 mol% Y₂O₃–ZrO₂ specimens sintered at 1,550 °C and more were disintegrated without leaving the original appearances when the treatment temperature was between 200 °C and 400 °C. The size of the disintegrated fragments of Y-TZP sintered body was much affected by hydrothermal treatment conditions. Only with hydrothermal treatment and simple ball milling, the sintered body was pulverized into the primary particle level. This technique is expected to apply to a sustainable recycling system for the zirconia ceramics, which restrains an energy consumption compared to crushing zirconia using mechanical procedures.     

Spatial and Temporal Analysis of Hydrological Provision Ecosystem Services for Watershed Conservation Planning of Water Resources

Spatial planning for sustainable water resources development requires precise information on the local potential for providing water yield in a watershed. For water resource conservation, we analyzed spatial and temporal patterns of hydrological provision ecosystem services in the upper Teshio watershed of northernmost Japan. The Soil and Water Assessment Tool (SWAT) was applied to simulate hydrologic processes and determine parameters affecting the water cycle. The spatial increase of water yield at flat area near river channel in winter was explained by low field capacity of soil water, absence of water uptake by crops and gentle topography. The spatial patterns of snowmelt and rainfall were important drivers of the spatial pattern in water yield during other periods. The zonation model was applied to investigate dynamic changes in spatial conservation prioritization of hydrological provision ecosystem services, according to simulated water yields in February, April and October. The results showed that the conservation priority ranking dynamically changed spatially and temporally. Our economic assessment of hydrological provisioning services (irrigation, electricity production and household usage) indicated that the spatial pattern of the priority for water resources was different from that of economic value of the provisioning services. Our results indicated that a combination of hydrologic and cost zonation models would improve sustainable management planning of water resources and their hydrological ecosystem services have great spatiotemporal fluctuation.     

DNA promotes the activation of oxygen molecules by binuclear cobalt(II) compounds

We have observed that binuclear cobalt(II) compounds with H(HPTP), Co₂(HPTP)(CH₃COO)(ClO₄)₂ and Co₂(HPTP)Cl(ClO₄)₂, react with oxygen molecules when DNA is present in the solution, cleaving the DNA (H(HPTP) denotes N,N,N′,N′-tetrakis(2-pyridylmethyl)-1,3-diaminopropane-2- ol).     

Analysis of Dispatching Rules of AGV Systems with Multiple Vehicles

We study automated guided vehicle systems that contain multiple vehicles. Each vehicle transports an item from a certain point to its destination. The inter-arrival time of items to each node is assumed to be independently and geometrically distributed. Each node has an infinite buffer capacity, and thus no item is lost. The deadhead time of the empty vehicle and the transportation time of the loaded vehicle are assumed to be arbitrarily distributed. We propose two empty vehicle dispatching policies, and numerically calculate the waiting time distributions of the items for each policy using a state-space reduction technique for Markov chains. Several examples are given to demonstrate the advantages and disadvantages of each policy.