Thermal and mechanical stability of soldering QFP with Sn-Bi-Ag lead-free alloy

Thermal stability of the circuit boards with a quad flat package (QFP) soldered with Sn-58wt%Bi-(0, 0.5 and 1.0) wt% Ag and their microstructural features were evaluated. The addition of 1.0 wt% Ag causes the formation of large primary Ag/sub 3/Sn precipitates in the solder while no primary Ag/sub 3/Sn is found in Sn-57Bi-0.5Ag. Thermo-Calc calculation indicates that the lowest limit content for the formation of primary Ag/sub 3/Sn is about 0.8 wt%. Heat-exposure below 100/spl deg/C has no serious degradation on the joint structure for all solders. Heat-exposure at 125/spl deg/C caused serious degradation in joint strength for all alloys. The contamination of Pb from Sn-Pb surface plating on the components reduces the interface tolerance by forming ternary Sn-Pb-Bi phase melting at low temperature. Thermal fatigue between -20 and 80/spl deg/C does not have any significant influence on joint structure.     

Lack of evidence for the transmission of JC polyomavirus between human populations

Human polyomavirus JC virus (JCV), the causative agent of progressive multifocal leukoencephalopathy, is ubiquitous in humans, infecting children asymptomatically then persisting in renal tissue. Since JCV DNA can readily be detected from urine, it should be a useful tool with which to study the mode of virus transmission in humans. Based on this notion, we examined the extent to which JCV was transmitted from the American to Japanese populations in Okinawa Island, Japan. (A population of about 50 000 American soldiers and families have been stationed in Okinawa since 1945.) Four JCV types (A to D) were identified in American populations in U.S.A., whereas only type B was prevalent in elder Japanese in Okinawa who had reached adulthood by 1945. Thus, types A, C, and D served as indicators of the transmission of JCV from American to Japanese populations. We then examined whether types A, C, and D were detectable in Japanese in Okinawa aged 30-50 years who may have been in contact with Americans during childhood. However, all the 125 isolates from the younger Japanese population were type B without exception. From this finding, we concluded that JCV is rarely transmitted between human populations.     

Performance of ternary PtRuRh/C electrocatalyst with varying Pt:Ru:Rh ratio for methanol electro-oxidation

Highly dispersed ternary PtRuRh/C anode catalysts for direct methanol fuel cells were prepared with various contents and their electro-catalytic activities towards methanol oxidation at 25 °C and 60 °C were examined to investigate the influence of the catalyst composition. Electrocatalysts were prepared by a co-impregnation method using ethanolic solutions of metal precursors and carbon black followed by pyrolysis under reducing conditions. X-ray diffraction analysis revealed that the fcc peaks shifted to higher diffraction angles with increasing Rh content, indicating the alloying of Rh into the fcc structure. In terms of the mass specific current density, the activity towards methanol oxidation differed significantly depending on the catalysts composition and cell temperature. The catalyst prepared at a ratio of Pt:Ru:Rh = 1:1:2 exhibited the highest activity at 60 °C of 155 A (g-Pt)⁻¹ at 0.5 V vs. RHE.     

Monoclonal antibodies against pig ovarian follicular granulosa cells induce apoptotic cell death in cultured granulosa cells

Two monoclonal antibodies capable of inducing granulosa cell apoptosis were produced against granulosa cells prepared from antral follicles of pig ovaries. The healthy follicles, 4-5 mm in diameter, were dissected from the ovaries of gilts, and then granulosa cells were isolated. BALB/c female mice were immunized with the isolated granulosa cells. Antibodies against the granulosa cells were detected by immunofluorescent staining using frozen ovarian sections. The isolated spleen cells prepared from immunized mice producing antibodies against the granulosa cells were fused with Sp2/O-Ag 14 mouse myeloma cells by standard hybridization techniques. Two hybridoma clones, PFG-1 and PFG-2, which produced specific IgM antibodies against granulosa cells were selected. Western blotting analysis revealed that PFG-1 and PFG-2 antibodies specifically recognized cell-membrane proteins with molecular weights of 55 and 70 kD and isoelectric points of 5.9 and 5.4, respectively. The monoclonal antibodies immunohistochemically reacted with granulosa cells of healthy follicles. When the isolated granulosa cells prepared from healthy follicles were cultured in medium containing 0.1 or 10 micrograms/m/PFG-1 or PFG-2 antibodies, respectively, the cells underwent apoptosis as determined by nuclear morphology, DNA electrophoresis and flow cytometric analysis. In conclusion, these two monoclonal antibodies against granulosa cells have cell-killing activity in cultured granulosa cells.     

Effect of green tea rich in gamma-aminobutyric acid on blood pressure of Dahl salt-sensitive rats

A method of reducing the amount of data required to reconstruct an image is described. In this scheme, fully sampled low spatial frequency data are acquired up to a given cutoff frequency and above this point, only alternate lines are sampled. Two images are produced, one of low definition and one of high definition but aliased. The proposed algorithm unwraps the aliased data, which are then used to enhance the low pass image, yielding a best estimate of the true image. The reduced sampling technique is shown to afford biological images that are almost indistinguishable from those obtained from a complete data set.     

A realization of a below-1-V operational and 30-MS/s sample-and-hold IC with a 56-dB signal-to-noise ratio by applying the current-based circuit approach

This paper demonstrates the low-voltage and low-power operation of a MOS sample-and-hold circuit while preserving speed and accuracy, aiming at the realization of a pipelined low-voltage and low-power analog-to-digital converter on a system large-scale integrated circuit. It was fabricated by utilizing 0.35-/spl mu/m CMOS technology. The main feature of this circuit is that all the input, signals, and output are in the current form. The circuit consists of simple current mirrors. In order to eliminate the signal-dependent current transfer ratio error, voltages at the drain terminals of mirror transistors are fixed as constant. A source degeneration resistor, which is a transistor in the triode operational region, is connected to a mirror transistor in order to alleviate the influence of the threshold and transconductance parameter variations. Control signals are boosted in voltage and applied to the gate of switch NMOS transistors in the signal path in order to reduce the on-resistance of analog switches. A differential configuration is adopted throughout the entire circuit and effectively cancels switch feedthrough errors. As a result, a 30-MS/s operation with a signal-to-noise ratio (SNR) of 56 dB from a 1-V supply has been achieved, when the input current is /spl plusmn/200 /spl mu/A. The chip even operated down to 0.85 V with a 20-MHz clock. The SNR was measured as 50 dB with an input current of /spl plusmn/100 /spl mu/A.     

Low-Thermal-Expansion Properties of Sodium- and Lithium-Substituted Cubic Cesium Leucite Compounds

Cubic cesium leucite-based compounds, namely cesium leucites, cesium sodium leucites, and cesium lithium leucites, were synthesized using a multistep solid-state reaction method. The thermal expansion properties, in the temperature range of 298-1273 K, for the synthesized cubic cesium leucite-based compounds were examined using high-temperature powder X-ray diffractometry data. The thermal expansions of the cubic cesium leucite-based compounds were found to vary with the chemical composition. For instance, the thermal expansions of Cs_0.7Na_0.2Al_0.9Si_2.1O₆ and Cs_0.7Li_0.2Al_0.9Si_2.1O₆ were 0.14% at 1273 K and 0.081% at 1073 K, values lower than those of Cs_0.9Al_0.9Si_2.1O₆, which were 0.16% at 1073 K and 0.2% at 1273 K. The results showed that the thermal expansions of the cubic cesium leucite-based compounds changed with ionic substitution at the Cs⁺ sites because of ionic size differences between Cs⁺ and the Na⁺ or Li⁺ substitutional ions.     

Enhancement of surface acidity and catalytic activity by glass formation of calcium metaphosphate

Effective acid sites for the dehydration of 2-propanol and isomerization of 1-butene were found to be generated by glass formation of calcium metaphosphate. The number of these sites with strong acidity remarkably decreased by the crystallization of the glass, where the condensation of hydroxyl groups were significant. Thus, the sites must be the monohydrogen phosphate protons.