Assessment of disease activity in rheumatoid arthritis using magnetic resonance imaging: quantification of pannus volume in the hands

We attempted to assess whether pannus volume measured by magnetic resonance imaging (MRI) can be used as an indicator of disease activity in rheumatoid arthritis (RA). Eleven women (mean age 46 yr) with uncontrolled RA were studied for 1 yr. Pannus formation in both hands was quantified using MRI at the start of the study, and at 6 and 12 months thereafter. The volume of enhancing pannus (VEP) was compared with changes in the radiological scores, grip strength, joint tenderness counts, joint swelling counts, erythrocyte sedimentation rate (ESR), and serum C-reactive protein (CRP). Patients were classified into three groups based on VEP changes between 0 and 12 months: unchanged (n = 2), decreased (n = 6) and increased (n = 3). VEP at 6 months and at 12 months differed significantly between the three groups. No statistically significant differences were found between the groups in radiographic scores, physical parameters or laboratory parameters despite the fact that some of these parameters changed in the direction indicated by the changes in VEP. VEP can be used as a new indicator to assess disease activity in individual RA patients and, using this parameter, treatment outcome can be assessed in fewer subjects than with traditional measures.     

Composite of Au nanoparticles and molecularly imprinted polymer as a sensing material

A molecularly imprinted polymer with immobilized Au nanoparticles (Au-MIP) is reported as a novel type of sensing material. The sensing mechanism is based upon the variable proximity of the Au nanoparticles immobilized in the imprinted polymer, which exhibits selective binding of a given analyte accompanied by swelling that causes a blue-shift in the plasmon absorption band of the immobilized Au nanoparticles. Using adrenaline as the model analyte, it was shown that molecular imprinting effectively enhanced the sensitivity and selectivity, and accordingly, Au-MIP selectively detects the analyte at 5 microM. The combination of molecular imprinting and the Au nanoparticle-based sensing system was shown to be a general strategy for constructing sensing materials in a tailor-made fashion due to wide applicability of the imprinting technique and the independence of the sensing mechanism from the analyte recognition system.     

Germanium-oxide glass optical fibre prepared by VAD method

Germanium-oxide glass optical fibre doped with antimony for transmission of the 2 to 3 ?m band has been prepared by the vapour-phase axial deposition (VAD) method. An attenuation loss of 13 dB/km at 2.05 ?m and 70 dB/km at 2.4 ?m has been achieved.     

Concentration dependence of the diffusion coefficient in polymer solution and molecular weight distribution determined by the diffusion method

The effects of the concentration dependence of the diffusion coefficient of a polymer solution (polystyrene in benzene and cyclohexane) in determining molecular weight distribution by the diffusion method are briefly discussed. The value of the ratio D_m0/D_A0 in a good solvent was found to be close to 1.0 for a polydisperse polymer and less than 1.0 for monodisperse polymers. Molecular weight distribution curves of the polydisperse sample were obtained by the diffusion method in cyclohexane and benzene, respectively. The molecular weight distribution curve obtained for the polymer used in benzene solution looked as if the polymer had a narrow molecular weight distribution. The phenomena cited above were interpreted in the light of the concentration dependence of the diffusion coefficient of polymer solutions.     

Optical design of a hollow cube-corner retroreflector for a geosynchronous satellite

The optical characteristics of a single-element hollow cube-corner retroreflector for a geosynchronous satellite were numerically evaluated for laser ranging and laser long-path absorption measurements of atmospheric species. An optical design with spherical surfaces and tuned dihedral angles was considered to compensate for velocity aberrations. The parameters for the retroreflector were optimized with genetic algorithms for different retroreflector sizes and wavelengths (500 nm and 1, 3, and 10 mum). We found that 20-cm retroreflectors are sufficient for realistic measurements when the laser wavelength is 500 nm or 1 mum. However, a larger retroreflector is necessary to overcome the detector noise level at 3 and 10 mum.     

Fine silicon carbide fibers synthesized from polycarbosilane-polyvinylsilane polymer blend using electron beam curing

A fine SiC fiber is synthesized from a polymer blend of polycarbosilane (PCS) and polyvinylsilane (PVS) with electron beam curing under vacuum. The obtained SiC fiber from the PCS-PVS blend polymer has smaller average diameter of 8.5 m than that of 11.8 m from PCS, and shows higher average tensile strength of 3.2 GPa than that of 2.8 GPa from PCS after heat treatment at 1673 K in Ar gas atmosphere. However, the SiC fiber from the polymer blend decreases in tensile strength after heat treatment above 1773 K due to -SiC crystal growth near the fiber surface, because of a small amount of oxygen incorporated in the fiber.     

Magnetization Curve of Two-Dimensional Anti-ferromagnetic Solid 3He on Graphite

Two-dimensional anti-ferromagnetic solid ³He on graphite, so called 4/7 phase, is a highly frustrated magnetic system and its ground state is considered to be a gapless spin liquid. Then how is the behavior in high magnetic fields? We tried to observe the magnetization curve at around 1 mK in high magnetic fields up to 10 T, using a Faraday-type magnetometer. To eliminate a large background signal from graphite as a substrate and copper as a thermal link, a double gradient coil system is employed to produce opposite field gradients in two regions equidistant from the field center. Preliminary results of the 4/7 phase on graphite show no saturated magnetization even at 1 mK and 10 T, suggesting the existence of magnetization plateau.     

Fabrication of silicon nitride nanoceramics—Powder preparation and sintering: A review

Fine-grained silicon nitride ceramics were investigated mainly for their high-strain-rate plasticity. The preparation and densification of fine silicon nitride powder were reviewed. Commercial sub-micrometer powder was used as raw powder in the “as-received” state and then used after being ground and undergoing classification operation. Chemical vapor deposition and plasma processes were used for fabricating nanopowder because a further reduction in grain size caused by grinding had limitations. More recently, nanopowder has also been obtained by high-energy milling. This process in principle is the same as conventional planetary milling. For densification, primarily hot pressing was performed, although a similar process known as spark plasma sintering (SPS) has also recently been used. One of the advantages of SPS is its high heating rate. The high heating rate is advantageous because it reduces sintering time, achieving densification without grain growth. We prepared silicon nitride nanopowder by high-energy milling and then obtained nanoceramics by densifying the nanopowder by SPS.     

Formation of the myosin.ADP.gallium fluoride complex and its solution structure by small-angle synchrotron X-ray scattering

The products of the SOS-regulated umuDC operon are required for most UV and chemical mutagenesis in Escherichia coli, a process that results from a translesion synthesis mechanism. The UmuD protein is activated for its role in mutagenesis by a RecA-facilitated autodigestion that removes the N-terminal 24 amino acids. A previous genetic screen for nonmutable umuD mutants had resulted in the isolation of a set of missense mutants that produced UmuD proteins that were deficient in RecA-mediated cleavage (J. R. Battista, T. Ohta, T. Nohmi, W. Sun, and G. C. Walker, Proc. Natl. Acad. Sci. USA 87:7190-7194, 1990). To identify elements of the UmuD' protein necessary for its role in translesion synthesis, we began with umuD', a modified form of the umuD gene that directly encodes the UmuD' protein, and obtained missense umuD' mutants deficient in UV and methyl methanesulfonate mutagenesis. The D39G, L40R, and T51I mutations affect residues located at the UmuD'2 homodimer interface and interfere with homodimer formation in vivo. The D75A mutation affects a highly conserved residue located at one end of the central strand in a three-stranded beta-sheet and appears to interfere with UmuD'2 homodimer formation indirectly by affecting the structure of the UmuD' monomer. When expressed from a multicopy plasmid, the L40R umuD' mutant gene exhibited a dominant negative effect on a chromosomal umuD+ gene with respect to UV mutagenesis, suggesting that the mutation has an effect on UmuD' function that goes beyond its impairment of homodimer formation. The G129D mutation affects a highly conserved residue that lies at the end of the long C-terminal beta-strand and results in a mutant UmuD' protein that exhibits a strongly dominant negative effect on UV mutagenesis in a umuD+ strain. The A30V and E35K mutations alter residues in the N-terminal arms of the UmuD'2 homodimer, which are mobile in solution.