An interactive system for constructing cat''s cradle string diagram using GA

In many method of the cat's cradle string diagram processing in use today, there is no a strong emphasis on user interaction. This paper discusses a method for constructing cat's cradle string diagram in 2-D. The method uses a string representation and processing in 2-D which preserves the topology characteristics of the string diagram and also uses a small data volume. The inputted string diagram is transformed onto its cat's cradle string diagram by geometric transformation and GA. The method allows the user to interactively construct a cat's cradle string diagram. Three operations are used for constructing cat's cradle diagram, they are pull (over and under), release and exchange. An implemented program executed some shapes of cat's cradle for verifying the method.     

Effect of temperature on humido-sensitive conducting polymer actuators

Temperature dependence of water vapor sorption and electro-active polymer actuating behavior of free-standing films made of poly(3,4-ethylenedioxythiophene) doped with poly(4-styrenesulfonate) (PEDOT/PSS) was investigated by means of sorption isotherm and electromechanical analyses. The non-porous PEDOT/PSS film, having a specific surface area of 0.13 m² g^?1, sorbed water vapor of 1080 cm³(STP) g^?1, corresponding to 87 wt%, at relative water vapor pressure of 0.95. A temperature rise from 25 °C to 40 °C lowered sorption degree, indicative of an exothermic process, where isosteric heat of sorption decreased with increasing water vapor sorption and the value reached 43.9 kJ mol^?1, being consistent with the heat of water condensation (44 kJ mol^?1). Upon application of 10 V, the film underwent contraction of 2.46% at 5 °C caused by desorption of water vapor due to Joule heating, which slightly decreased to 2.10% at 45 °C. The speed of contraction was one order of magnitude faster than that of expansion and less dependent on the temperature since water vapor sorbed in the film were forced to desorb by Joule heating. In contrast, the higher the temperature the faster the film expansion because diffusion coefficient increased as the temperature became higher.     

Electrical properties and microstructure in the system ceria-alkaline earth oxide

The ionic conduction of oxygen in the ceria-alkaline earth oxide system was investigated as a function of temperature, partial pressure of oxygen and oxide composition, together with its crystal structure, density, and microstructure. Undoped ceria and its solid solution with alkaline earth oxides have a cubic fluorite structure. The ionic conductivity of ceria is greatly enhanced by additions of calcia and strontia, even when they are added in excess of the solubility limit. The conductivities of ceria-calcia and ceria-strontia were much higher than those of calcia-and yttria-stabilized zirconia. Up to the limit of calcia and strontia, the ionic transference number was nearly unity in the temperature range between 600 and 900°C. With an increase in calcia and strontia content, the ionic conductivity was little affected by the presence of a second phase of CaO and SrCeO₃.     

Observation of residual stress and defects in silicon induced by scribing

Residual stresses induced by three scribing methods, diamond point scriber, laser scriber and diamond blade saw, are studied quantitatively by infra-red photoelasticity. It is clear that diamond blade saw scribing is most desirable, for residual stress induced by it is several times smaller than the stress caused by the other methods. The stress gradient differs between the laser scribed sample and the others, probably because of the difference in stress generation mechanism. Removing the damaged layer by etching reduces residual stress. The three scribing methods are also studied by the observation of defects after annealing and the results are compared with those determined by photoelastic measurement.     

(J, J′)-lossless factorization based on conjugation

This paper is concerned with a derivation of the state-space form of the (J, J′)-lossless factorization which contains both the inner-outer factorization and the spectral factorization of positive matrices as special cases. Also, the (J, J′)-lossless factorization gives a unified framework of H^∞ control theory. We use the method of conjugation which makes the derivation much simpler than the previous literature, most of which used the technique of (J, J′)-spectral factorization. A necessary and sufficient condition is represented in terms of two Riccati equations one of which is degenerated.     

Scattering characteristics in reheated fluorozirconate glasses

The relation between the scattering intensity and reheating conditions in fluorozirconate glasses was studied precisely to clarify the effect of devitrification induced by fiber drawing using the preform method. The drawing-induced scattering is substantially caused by the nucleation of microcrystallites and begins to increase at a temperature lower than that predicted by DTA or DSC measurements. Nevertheless, it is revealed that ultralow-loss fluoride glass fibers can be drawn without excess loss increase by the perform method under optimized glass compositions and reheating conditions.     

Eliminating redundant search space on backtracking for forward chaining theorem proving

This paper introduces some improvements on the intelligent backtracking strategy for forward chaining theorem proving. How to decide a minimal useful consequent atom set for a refutation derived at a node in a proof tree is discussed. In most cases, an unnecessary non-Horn clause used for forward chaining will be split only once. The increase of the search space by invoking unnecessary forward chaining clauses will be nearly linear, not exponential anymore.In this paper, the principle of the proposed method and its correctness are introduced. Moreover,some examples are provided to show that the proposed approach is powerful for forward chaining theorem proving.     

Development of a grout database for geological disposal of high-level radioactive waste

Japan Atomic Energy Agency (JAEA) has developed a grout database (GDB) comprising the latest technical data of grout materials relevant to the geological disposal of high-level radioactive waste (HLW). Currently, only newly developed grout materials of low pH cements, superfine spherical silica and colloidal silica, which are expected to provide a target pH ≤ 11 leachate, are included in the GDB. Case examples from on-site works and laboratory-based tests that have been published in the literature have been used to add construction and material details to the GDB. The GDB is available online (https://groutdb.jaea.go.jp/grout/ [in Japanese]) for registered users to obtain and provide data of grout technology. Furthermore, the GDB can be used to correlate requirements of mechanical, physical, and/or chemical properties of a grout material to specifically address concerns over safety assessment, material and injection method development, and/or prediction of grout penetration.     

Development of High Count Rate TES Microcalorimeters

To realize new TES imaging for high energy X-ray or gamma-ray spectrometer with a large pixel array and high count rate, we will try to develop a new radiation absorber self-adjusting the operating temperature and adopting an original reading out method of large pixel array using parallel biasing scheme. Our first prototype TES pixel using Au/Ti/Au tri-layer which consists of the small heat sensors and the radiation absorption area, and these are biased in serial. In this device, the current pulse with the decay time constant of less than 20 microseconds of incident X-rays from ⁵⁵Fe source were observed.