Highly Stable Au Nanoparticles with Tunable Spacing and Their Potential Application in Surface Plasmon Resonance Biosensors

Colloidal Au‐amplified surface plasmon resonance (SPR), like traditional SPR, is typically used to detect binding events on a thin noble metal film. The two major concerns in developing colloidal Au‐amplified SPR lie in 1) the instability, manifested as a change in morphology following immersion in organic solvents and aqueous solutions, and 2) the uncontrollable interparticle distance, determining probe spacing and inducing steric hindrance between neighboring probe molecules. This may introduce uncertainties into such detecting techniques, degrade the sensitivity, and become the barricade hampering colloidal Au‐based transducers from applications in sensing. In this paper, colloidal Au‐amplified SPR transducers are produced by using ultrathin Au/Al₂O₃ nanocomposite films via a radio frequency magnetron co‐sputtering method. Deposited Au/Al₂O₃ nanocomposite films exhibit superior stability, and average interparticle distances between Au nanoparticles with similar average sizes can be tuned by changing surface coverage. These characteristics are ascribed to the spacer function and rim confinement of dielectric Al₂O₃ and highlight their advantages for application in optimal nanoparticle‐amplified SPR, especially when the probe size is smaller than the target molecule size. This importance is demonstrated here for the binding of protein (streptavidin) targets to the probe (biotin) surface. In this case, the dielectric matrix Al₂O₃ is a main contributor, behaving as a spacer, tuning the concentration of Au nanoparticles, and manipulating the average interparticle distance, and thus guaranteeing an appropriate number of biotin molecules and expected near‐field coupling to obtain optimal sensing performance.     

A New Approach to Suppress the Effect of Machining Error for Waveguide Septum Circular Polarizer at 230 GHz Band in Radio Astronomy

A new stepped septum-type waveguide circular polarizer (SST-CP) was developed to operate in the 230 GHz band for radio astronomy, especially submillimeter-band VLBI observations. For previously reported SST-CP models, the 230 GHz band is too high to achieve the design characteristics in manufactured devices because of unexpected machining errors. To realize a functional SST-CP that can operate in the submillimeter band, a new method was developed, in which the division surface is shifted from the top step of the septum to the second step from the top, and we simulated the expected machining error. The SST-CP using this method can compensate for specified machining errors and suppress serious deterioration. To verify the proposed method, several test pieces were manufactured, and their characteristics were measured using a VNA. These results indicated that the insertion losses were approximately 0.75 dB, and the input return losses and the crosstalk of the left- and right-hand circular polarization were greater than 20 dB at 220–245 GHz on 300 K. Moreover, a 230 GHz SST-CP was developed by the proposed method and installed in a 1.85-m radio telescope receiver systems, and then had used for scientific observations during one observation season without any problems. These achievements demonstrate the successful development of a 230 GHz SST-CP for radio astronomical observations. Furthermore, the proposed method can be applicable for observations in higher frequency bands, such as 345 GHz.     

Field test results of multi-channel digital tv transmission at 15 and 30 Mb/s through an intelsat satellite using a PSK/FDMA system

This paper describes field test results of multi-channel digital TV transmission using a PSK/FDMA system and the related subjective test results of received TV pictures. The picture quality of the multi-channel 15 or 30 Mb/s transmission for both NTSC and PAL systems through the INTELSAT POR satellite are subjectively evaluated for various bit-error rates. In addition, subjective evaluations were made at various values of earth-station e.i.r.p. to compare the picture quality of digital transmissions with that of current half-transponder FM transmission.     

Cloning and in vitro and in vivo expression of plant glutathione S-transferase zeta class genes

The cDNAs encoding the zeta class of glutathione S-transferases (GSTs) (GSTZs), which are multifunctional enzymes, were cloned from Arabidopsis thaliana L. and three lines of Brassica napus L. by RT PCR, and named AtGSTZ for A. thaliana ecotype Columbia gll, and BnGSTZ-A, BnGSTZ-B and BnGSTZ-C for B. napus cv. Shan 2A, Shan 213 and Ken C1, respectively. Sequence analysis revealed that the sequences of Shan 2A and Shan 2B were identical, and Ken C1 was different only in 3.8% of the sequence. Comparison of these sequences with published sequences in GeneBank showed that the sequences of the Brassica species were unpublished. The cDNAs were then inserted into two vectors for in vivo expression in Escherichia coli and in vitro expression in a wheat-germ cell-free protein synthesis system. All GSTZs were well expressed both in vivo and in vitro as an enzymatically active form, showing that all of them had both dichloroacetic acid dechlorinating and maleylacetone isomerase activities.     

In vitro construction and screening of a Burkholderia cepacia lipase library using single-molecule PCR and cell-free protein synthesis

A mutant library of Burkholderia cepacia lipase KWI-56 was constructed on microplates by a cell-free process and tested with a chromogenic assay. This high-throughput construction system can be used to screen mutant proteins based on their catalytic activity.     

Acetylation of loofa (Luffa cylindrica) sponge as immobilization carrier for bioprocesses involving cellulase

The feasibility of using loofa sponge for immobilization of cellulase-producing microorganisms was investigated by acetylating loofa sponge. Acetylation was achieved by autoclaving process of loofa sponge immersed in acetic anhydride at various temperatures for various times. The degree of acetylation, as inferred by the weight percentage gain (WPG), was enhanced by increasing both temperature and the duration of acetylation. The acetylation of a piece of loofa sponge in an autoclave at 120 degrees C for 20 min resulted in a WPG of about 8%, which was sufficient to protect the loofa sponge against cellulose degradation. The acetylated loofa sponge prepared under this condition was not decomposed by commercial cellulase and its structure was maintained for more than 720 h during repeated-batch treatments with commercial cellulase. A flocculating yeast (Saccharomyces cerevisiae IR-2) and a fungus (Trichoderma reesei QM9414) were successfully immobilized in the acetylated loofa sponge. In each case, the percentage of immobilized cells was as high as that obtained using nonacetylated loofa sponge. Acetylation had no adverse effects on cell growth and immobilization of T. reesei QM9414, as well as on cell growth and ethanol production by S. cerevisiae IR-2. T. reesei QM9414 immobilized on an acetylated loofa sponge was successfully used for repeated-batch cellulase production from commercial cellulose powder. Although the acetylated loofa sponge showed a slight weight loss, it was not disintegrated by activated sludge. The results obtained in this study showed that acetylated loofa sponge is suitable as an immobilization carrier for bioprocesses involving cellulase.     

One Pot Cooking of Rice Grains for Preparation of Rice-Gel Samples Using a Small-Scale Viscosity Analyzer: Small-scale Rice-gel Preparation from Grains

Rice-gel prepared by the following three steps: rice grain cooking, shearing of the cooked rice, and cooling for gel formation, is expected as a novel food ingredient for modification of various food products such as bread and noodles. To meet the demand for high-throughput systems for research and developments on the new rice gels, herein we established a mini-cooking system for preparation of rice gel samples from grains using a small-scale viscosity analyzer (Rapid Visco Analyzer; RVA). Polished rice grains (4 g) were cooked with 22 mL of water in a canister, and the paddle equipped in the canister was rotated at 2,000 rpm for 30 min (80 °C was used as a representative) to shear the cooked rice. The sheared paste was cooled to 10 °C at 160 rpm, and the initial gelation property was evaluated by viscosity analysis within the RVA. Alternatively, the sheared paste was transferred to an acrylic mold and kept at 4 °C for 0, 1, 3, and 5 days for determination of the hardness with a compression test. Compressive forces required to penetrate 20 % thickness for three tested rice cultivars were measured, and the trend of the value shifts during preservation is similar to the corresponding trend obtained in 300-g grain scale laboratory tests, whereas the individual values were halved in the former. This small cooking method could offer a useful assay system for a rapid evaluation in the breeding programs and in the high-throughput screening of additives for the modification of properties.     

Development of a fed-batch culture process for enhanced production of recombinant human antithrombin by Chinese hamster ovary cells

Antithrombin is a serine protease inhibitor that inactivates several coagulation proteases, primarily thrombin and factor Xa. The Chinese hamster ovary (CHO) cell line transfected with a vector expressing recombinant human antithrombin (rAT) and a selectable marker, glutamine synthetase (GS), was cultivated in a 2-l fed-batch culture process using serum-free, glutamine-free medium. To maximize the rAT yield, effects of culture pH, balanced amino acid feeding, and an increased glutamate concentration on cell metabolism and rAT production were investigated. When cells were grown at pH values of 6.6, 6.8, 7.0, and 7.2, the maximum cell density and maximum lactate concentration decreased with decreasing pH. The highest production level of rAT was obtained at culture pH 6.8 due to the extended culture lifetime. Compared to the imbalanced amino acid feeding at culture pH 6.8, the balanced amino acid feeding increased the amount of rAT activity by 30% as a result of an increased viable cell number. A decrease in the specific glucose consumption rate (q(Glc)) with increasing culture time was observed in all the above-mentioned experiments, while the glucose concentration was maintained above 0.7 g l(-1). In addition, a decrease in the specific rAT production rate (q(rAT)) was observed after the depletion of lactate in the late cultivation stage. Taken together, these results suggest that the reduced availability of cellular energy caused by the decrease in q(Glc) and depletion of lactate led to the decrease in q(rAT). This decrease in q(rAT) was partially prevented by increasing the residual glutamate concentration from 1 mM to 7 mM, thus resulting in an additional 30% increase in the amount of rAT activity. The optimized fed-batch culture process yielded 1.0 g l(-1) rAT at 287 h of cultivation.     

Improvements in the cell-free production of functional antibodies using cell extract from protease-deficient Escherichia coli mutant

Expression of a functional antibody fragment (Fab) using an Escherichia coli cell-free expression system has been reported previously [Jiang et al., FEBS Lett., 514, 290-294 (2002)]. The low yield of the synthesized antibody, however, limits the usefulness of the cell-free expression system, partly due to the degradation of product by endogenous proteases from the E. coli extract. To determine which proteases are responsible for the degradation, we compared the expression of a 6D9 Fab fragment under conditions whereby several protease inhibitors were added into the cell-free system. The addition of serine protease inhibitor increased the amount of the Fab fragment, indicating that serine proteases caused the antibody degradation. Therefore, several serine protease-deficient mutants of E. coli BW25113 were constructed by targeted homologous recombination. The use of extract from a double protease-deficient mutant (DeltadegP-ompT) significantly increased the amount and antigen-binding activities of an anti-HSA scFv and a 6D9 Fab fragment. These results suggest that the DegP- and OmpT-deleted mutant is a useful source of S30 extract for the production or screening of antibodies using the cell-free expression system.