Voltage Control of Static Var Compensator for a Remote System Interconnected by Long‐Distance AC Cables

The voltage variation in a remote system is large when the system is connected by long‐distance AC cables due to the cable capacitance. In Japan, the longest 54‐km 66‐kV AC submarine cable interconnection between the Kyushu mainland and Goto Islands was commissioned in 2005. It was requested to mitigate the voltage variation caused by switching off and on one circuit of the two circuits in the AC cables when a fault occurs. Since the conventional voltage control methods such as transformer tap changer or shunt capacitor and reactor banks are not sufficient because of their slow response time, a static var compensator (SVC) was installed on the Goto Islands. In such an application, an SVC control method should be developed so as not to override the existing voltage control systems. This paper describes the SVC control method developed for the Goto Islands AC interconnection project, which can be applied to similar situations. The effectiveness of the control method was verified by the results of effective value simulation and of field testing, which was implemented before the SVC was commissioned in 2007. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(3): 19–30, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22337     

Interactive visualization of three-dimensional magnetic fields

In order to observe the physical values (magnetic flux density and eddy current) in 3D magnetic field analysis, an interactive and highly manipulative visualization system depicting stereo images is intalled in a graphics workstation with high functional graphic processors. The system has the following characteristics:

• 1 An interactive and highly manipulative menu window with many functions: it enables visualization of complex phenomena in a 3D field through observation of various combinations of physical values from various viewpoints.
• 2 Simultaneous display of both magnetic flux density and eddy current by using the appropriate use of two colour display methods for stream lines and distribution maps of density: this function facilitates observation of the mutual relations between two physical values in a 3D field.
• 3 Animations and stereo displays: since they give extremely distinct images, observers can easily understand even highly complex 3D phenomena.

In this paper, the calculation method of density vectors, their display methods, and interactive functions are described. Some examples are also illustrated.     

Effect of the addition of NH4F on anodic behaviors of DSA-type electrodes in H2SO4-(NH4)2SO4 solutions

The effect of NH₄F addition on the high-anodic behaviors of various DSA-type electrodes was investigated in a mixture of sulfuric acid and ammonium sulfate. The pronounced effect of NH₄ addition was observed on DSA-type Ti/RuO₂, Ti/IrO₂?TiO₂ electrodes, but not observed on the other electrodes studied. The close relationship was found between the increment of the electrode potential caused by the NH₄ addition and the quantity of F^? adsorbed on the electrode surface. The effect of NH₄F addition was considered to be resulted from the adsorption of F^? on the electrode surface, and the presence of adsorbed F^? was directly proved.     

Positive-temperature-coefficient effect of electrical resistivity below melting point of poly(vinylidene fluoride) (PVDF) in Ni particle-dispersed PVDF composites

This paper discusses the positive-temperature-coefficient effects of resistivity in Ni particle-dispersed poly(vinylidene fluoride) (PVDF) composites based on experiment results from SEM, DSC, and pressure-volume-temperature (PVT) measurements. The melting points of composites with Ni content of 20, 30, 40, and 50vol.% were equal to that of pure PVDF. The PTC effects in composites with Ni content of 40 and 50vol.% occurred at temperatures near the melting point of the PVDF matrix, whereas those in composites with Ni content of 20 and 30vol.% occurred at temperatures below the melting point of the PVDF matrix. We found that the PTC effect occurs even without melting of the matrix polymer. Moreover, we determined that a slight increase in specific volume at temperatures below the melting point of the matrix polymer acts fully as a driving force for forming a gap between fillers. This suggestion was backed up by theoretical analyses using percolation theory and a thermal-fluctuation-induced tunneling model.     

Improving the gas recovery and separation efficiency of a hydrate-based gas separation

Efficient gas recovery and separation in a hydrate-based system was investigated for a model gaseous mixture of R22 and nitrogen. The formed hydrate settled in the recovery vessel; excess water was recycled and the hydrate was subsequently decomposed by releasing pressure from the vessel. The gas uptake rate of R22 gas from the vapor phase and the gas recovery rate from the hydrate were determined from hydrate formation and decomposition, respectively. The gas recovery rate of R22 gas gradually increased with time. On the contrary, the nitrogen gas recovery rate was a maximum in the initial stage of hydrate decomposition. A high separation factor (S.F.) was achieved by first separating the N₂-rich gas generated during initial hydrate decomposition. An efficient hydrate-based gas separation and recovery process is proposed.     

Decomposition of chlorofluorocarbons on TiO2ZrO2

The decomposition of chlorofluorocarbons (CFCs) in the presence of water was examined over a variety of solid acid catalysts. The TiO₂ZrO₂ catalyst was found to have the highest activity and longest life among the catalysts examined. The activity of the TiO₂ZrO₂ catalysts depended upon the content of TiO₂. At the contents of TiO₂ from 58 to 90 mole%, the TiO₂ZrO₂ catalysts exhibited high activity, and these catalysts were proven to contain TiZrO₄ crystal. From the study of the XRD peak intensity of the TiZrO₄ crystal, it was highest on the TZ-58 which contained 58 mole% of TiO₂, and decreased with increasing the content of TiO₂. Furthermore, the conversion of CFC113 measured at 673 K was highest at TZ-58, and decreased gradually with increasing TiO₂ content. Therefore, the TiZrO₄ crystal influences the activity of decomposition of CFC113. However, the TiO₂ZrO₂ catalyst was gradually deactivated during the reaction due to the elimination of titanium atoms. A good relationship was found between the activity on TiO₂ZrO₂ catalyst and bond energy of CCl in the compounds of chlorofluorocarbons and hydrochlorocarbons, suggesting that the rate controlling step was the cleavage of CCl bond.     

Anisotropic structure of alkali metaphosphate glasses

Orientation anisotropy, which is well known in organic polymers with appropriate network structures, is less common in oxide glasses. We present the intermediate-range order in anisotropic alkali metaphosphate glass which consists of oriented PO₄ tetrahedral chains and intervening alkali cations along the elongation direction. The X-ray total structure factor S(Q) indicates that the inter-chain spacing depends on the size of alkali cations and varies from 5.03 to 6.28 Å. The mixed alkali effect is primarily related to an increase of the separation. The total correlation function T(r) provides the first definite evidence that the anisotropic structure is composed of phosphorus-bridging oxygen bonds (P–O_B) lying along the elongation direction and phosphorus-non-bridging oxygen bonds (P–O_T) oriented perpendicular to the elongation direction. The present result unveils fundamental aspects of the anisotropic structure of an oxide glass and provides essential information for the development of oxide glasses to control structural anisotropy.     

Hydrothermal flames in supercritical water oxidation: investigation in a pilot scale continuous reactor

Hydrothermal flames at 25 MPa supercritical water environment were investigated using a 4800 ml reaction tower, in which the sapphire windows were fitted for optical access. Down flowing hydrothermal flames were observed for oxidation of 2-propanol when the reactor was fed with inlet organic concentration higher than 2 vol% and air ratio higher than 1.8. Flame temperature, as high as 1100 °C, was measured by means of a thermocouple and the temperature was found to be strongly influenced by air ratio. Effective and stable oxidation of organics with TOC removal rate of 99.9% was achieved. Dioxins were also decomposed with a ratio higher than 99.9%, within 1 min reaction time in this reactor configuration.