Interactive visualization of three-dimensional magnetic fields

In order to observe the physical values (magnetic flux density and eddy current) in 3D magnetic field analysis, an interactive and highly manipulative visualization system depicting stereo images is intalled in a graphics workstation with high functional graphic processors. The system has the following characteristics:

• 1 An interactive and highly manipulative menu window with many functions: it enables visualization of complex phenomena in a 3D field through observation of various combinations of physical values from various viewpoints.
• 2 Simultaneous display of both magnetic flux density and eddy current by using the appropriate use of two colour display methods for stream lines and distribution maps of density: this function facilitates observation of the mutual relations between two physical values in a 3D field.
• 3 Animations and stereo displays: since they give extremely distinct images, observers can easily understand even highly complex 3D phenomena.

In this paper, the calculation method of density vectors, their display methods, and interactive functions are described. Some examples are also illustrated.     

Formation Mechanism and Synthesis of Apatite-Type Structure Ba2+xLa8−x(SiO4)6O2−δ

The formation process of Ba₂La₈(SiO₄)₆O₂ was clarified using thermogravimetry–differential thermal analysis (TG-DTA) and a high-temperature powder X-ray diffraction (HT-XRD) method. Phase changes identified from the HT-XRD data surprisingly corresponded to the weight loss and/or endothermic peaks observed in the TG-DTA curves. Raw material with the composition Ba₂La₈(SiO₄)₆O₂ was completely reacted at 1400°C and produced only an apatite-type compound without a secondary phase. Moreover, the synthesis of Ba_{2+ x} La_{8− x} (SiO₄)₆O_2−δ crystals with x = 0–2 was attempted using a solid-state reaction.     

Porous Glass-Ceramics with a Skeleton of the Fast-Lithium-Conducting Crystal Li1+xTi2−xAlx(PO4)3

Porous glass-ceramics with a skeleton of the fast-lithium-conducting crystal Li_{1+ x} Ti_{2− x} Al _x (PO₄)₃ (where x = 0.3–0.5) were prepared by crystallization of glasses in the Li₂O─CaO─TiO₂─Al₂O₃–P₂O₅ system and subsequent acid leaching of the resulting dense glass-ceramics composed of the interlocking of Li_{1+ x} Ti_{2− x} Al _x (PO₄)₃ and β-Ca₃(PO₄)₂ phases. The median pore diameter and surface area of the resulting porous Li_{1+ x} Ti_{2− x} Al _x (PO₄)₃ glass-ceramics were approximately 0.2 μm and 50 m²/g, respectively. The electrical conductivity of the porous glass-ceramics after heating in LiNO₃ aqueous solution was 8 × 10⁻⁵ S/cm at 300 K or 2 × 10⁻² S/cm at 600 K.     

Improvement of cyclic behavior of a ball-milled SiO and carbon nanofiber composite anode for lithium-ion batteries

The cyclic performance of a composite SiO and carbon nanofiber (CNF) anode was examined for lithium-ion batteries. SiO powder of several micrometers was pulverized using high energy mechanical milling. The SiO was ball-milled for 12 h with CNF to produce a composite electrode material that exhibited excellent cycling performance. A reversible capacity of approximately 700 mAh g⁻¹ was observed after 200 cycles. The excellent cyclic performance was discussed with respect to the change of the valence state of Si by ball-milling. A large irreversible capacity at the first cycle for the SiO/CNF composite electrode was reduced to 2% by chemically pre-charging with a lithium film attached to the rim of the electrode.     

Thermal behaviors and flame‐retardancy of styrene–ethylene–butadiene–styrene–block copolymer containing various additives

The thermal behaviors and the flame‐retardancy of styrene–ethylene–butadiene–styrene–block copolymer containing various additives were studied. The combustion was measured by the Underwriter laboratory (UL) test and cone calorimeter test and thermogravimetric analysis and program‐mass spectroscopy were applied to analyze the thermal behaviors. The blend with halogen additives showed the best result in the UL test. However, the blend with red‐phosphorous was the best in the cone calorimeter test. As the styrene sequence in the copolymer tended to degradate at a lower temperature, the major scission products spouted out from the polymer surface originated from polystyrene. The shorter the ignition times of the blends with red‐phosphorous were, the lower the peak heat release rates were. It was an interesting phenomenon because it suggested that the chemical structure of the residue changed to more stable polymers. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 156–161, 2007     

Effects of dressing containing plant sterol on serum cholesterol concentration and the safety evaluation in borderline or mildly hypercholesterolemic Japanese subjects

In a placebo-controlled double-blind study, we examined the effects of dressing containing plant sterol (PS) on blood lipids and the safety in Japanese borderline or mildly hypercholesterolemic subjects. Fifty-nine subjects [total cholesterol (TC) concentration > or = 200 mg/dL] were randomly divided into two groups and were given daily 15 g of dressing containing 800 mg of PS [PS(+)-group] or without PS [PS(-)-group] for 12 weeks. Every 4 weeks, fasting blood was examined and subjective symptoms were analyzed. Serum TC, low-density lipoprotein cholesterol (LDL-C) and apolipoprotein B (ApoB) concentrations did not change in the PS(-)-group, while TC and ApoB significantly decreased in the PS(+)-group at 8 and 12 weeks and LDL-C at 4, 8 and 12 weeks. Moreover, serum TC, LDL-C and ApoB concentrations were significantly lower than those of PS(-)-group at 8 and 12 weeks. Other laboratory tests were all in normal ranges and no adverse events were observed. The results indicated that PS-containing dressing decreased serum TC, LDL-C and ApoB concentrations in borderline or mildly hypercholesterolemic subjects. It is therefore proved that the dressing containing PS is helpful in maintaining blood cholesterol level normal and hence, the health of Japanese.     

Configuration optimization of clamping members of frame-supported membrane structures

A method is presented for configuration optimization of frames that have specified properties on nodal displacements, stresses, and reaction forces against static loads. The conventional ground structure approach is first used for topology optimization. A feasible solution with a small number of members satisfying all the design requirements except the stress constraints is obtained by assigning artificially small upper-bound displacement, or by penalizing the stiffness of a thin member. This way, the well-known difficulty in topology optimization under stress constraints is successfully avoided. The nodal locations and cross-sectional areas of the feasible solution are next optimized to obtain an approximate optimal configuration under stress constraints. The proposed method is applied to the design of self-fastening clamping members for membrane structures modeled using frame elements. An optimization result is also presented for a clamping member that adjusts deformation of membrane by applying a clamping force with a vertically attached bolt.     

Influence of Steeping Conditions for Kernels on Some Properties of Corn Starch

The steeping conditions for kernels affected the physicochemical properties of corn starch. Steeping in an alkaline solution minimized the nitrogen and phosphorus contents, while that in water and a sulfite solution gave high contents. The alkaline-steeping appeared to slightly reduce the crystallinity of starch granules, as judged on X-ray diffraction. Steeping at a low temperature produced the starch showing the lowest pasting temperature, on amylography, but it showed a similar gelatinization temperature, on photopastegraphy. to those of the other starches. The starches with low nitrogen and lipid contents swelled largely and were extensively solubilized on heating. The actual amylose contents were 20–21%, which were considerably lower than the apparent contents.     

Molecular Hydrogen Enhances Proliferation of Cancer Cells That Exhibit Potent Mitochondrial Unfolded Protein Response

Molecular hydrogen ameliorates pathological states in a variety of human diseases, animal models, and cell models, but the effects of hydrogen on cancer have been rarely reported. In addition, the molecular mechanisms underlying the effects of hydrogen remain mostly unelucidated. We found that hydrogen enhances proliferation of four out of seven human cancer cell lines (the responders). The proliferation-promoting effects were not correlated with basal levels of cellular reactive oxygen species. Expression profiling of the seven cells showed that the responders have higher gene expression of mitochondrial electron transport chain (ETC) molecules than the non-responders. In addition, the responders have higher mitochondrial mass, higher mitochondrial superoxide, higher mitochondrial membrane potential, and higher mitochondrial spare respiratory capacity than the non-responders. In the responders, hydrogen provoked mitochondrial unfolded protein response (mtUPR). Suppression of cell proliferation by rotenone, an inhibitor of mitochondrial ETC complex I, was rescued by hydrogen in the responders. Hydrogen triggers mtUPR and induces cell proliferation in cancer cells that have high basal and spare mitochondrial ETC activities.     

Extraction of lanthanide ions from aqueous solution by bis(2-ethylhexyl)phosphoric acid with room-temperature ionic liquids

Extractions of five kinds of lanthanide metal ions by bis(2-ethylhexyl)phosphoric acid (DEHPA) with [1-Cn-3-methylimidazolium][PF₆](Cn = C₂, C₄) or [1-butyl-4-methylpyridinium][PF₆] were carried out under various DEHPA and HNO₃ concentrations from 0 to 1 M and under different temperature conditions from 298 to 333 K. These results were compared with those using the conventional organic solvent, hexane, in terms of their distribution coefficient values. Under all of the conditions in this study, the ionic liquid system shows more than three times greater extractability for lanthanide compared to when hexane was used. The distribution coefficient of lanthanide ions decreased as the length of the alkyl chain increased from the ethyl to the butyl. In addition, the imidazolium cation generally shows a higher distribution coefficient compared to the pyridinium cation in an ionic liquid. The concentration ratio of lanthanides and DEHPA resulted in an extraction affinity transition for lanthanides. Also evaluated in this study were issues related to the selectivity associated with the lanthanide mixture and the dependency of the ionic radius during lanthanide extraction.