Stabilized production of highly concentrated bioethanol from fermentation broths by Zymomonas mobilis by pervaporation using silicone rubber‐coated silicalite membranes

Since pervaporation performance of ethanol‐permselective silicalite membrane, which is an aluminum‐free hydrophobic zeolite, in the separation of fermentation broths by yeast are negatively affected by succinic acid, the potential of pervaporation using silicone rubber‐coated silicalite membranes of ethanol fermentation broths, not containing succinic acid, by Zymomonas mobilis was investigated for the reliable production of concentrated bioethanol. In the separation of fermentation broths, the pervaporation performance was influenced by nutrients used for the preparation of fermentation broths. In the separation of a broth prepared with yeast extract, pervaporation performance was greatly compromised by accumulation of a substance(s) having an ultraviolet absorption maximum at approximately 260 nm not only in total flux, but also in permeate ethanol concentration compared to the separation of binary ethanol/water mixtures. When supplying a prepared broth with corn steep liquor without the accumulation of a substance(s) having an ultraviolet absorption maximum at approximately 260 nm, the permeate ethanol concentration did not decrease. Treating the prepared broth with activated carbon was effective in restraining the decrease in total flux. Pervaporation performance is also deteriorated by the adsorption of lactic acid contained in corn steep liquor onto the silicalite crystals. In the separation of ternary mixtures of ethanol/water/lactic acid, accomplished by adjusting the ternary mixtures to pH > 5, more than 90% of the permeation flux in the separation of binary ethanol/water mixtures was obtained, and the permeate ethanol concentration was comparable to that obtained in the separation of binary mixtures. For stably performing pervaporation, it is important to prepare ethanol fermentation broths by Zymomonas mobilis in which lactic acid concentration is as low as possible. Copyright © 2007 Society of Chemical Industry     

Chromium-Plated Steel Strip for Can Making

In laboratory researches and food packing tests, it has been shown that cold rolled steel strip, plated with a thickness of about 0–002 mil (0–05 μ) of chromium and coated with lacquer is a satisfactory material for cans. It is highly resistant to corrosion, especially to sulphur staining, and the lacquer coating remains firmly adherent. In food packing tests with it, the chromium content of the foodstuffs was no greater than it was with tinplate. The chromium plating line is similar in layout to an electrolytic tinning line, but insoluble electrodes are used and the electrolyte contains chromic and sulphuric acids. For high-speed operation with several plating tanks, special screening of part of the cathode is used to obtain a better lustre.     

Solid Acid Catalysts: Roles in Chemical Industries and New Concepts

Extensive studies of the cracking catalyst used in the largest process in chemical industries established the research field of solid acid catalysis. Solid acid catalysts are also utilized in various industrial processes. A new concept for acid site generation, Molecular hydrogen-originated protonic acid site, and its characteristics in alkane isomerization are described.     

Kinetics study of hydrogen adsorption over Pt/MoO3

The rate controlling step and the energy barrier involved in the hydrogen adsorption over Pt/MoO₃ were studied. Rates of hydrogen adsorption on Pt/MoO₃ were measured at the adsorption temperature range of 323–573 K and at the initial hydrogen pressure of 6.7 kPa. The rate of hydrogen uptake was very high for the initial few minutes for adsorption at and above 473 K, and reached equilibrium within 2 h. At and below 423 K, the hydrogen uptake still continued and did not reach equilibrium after 10 h. The hydrogen uptake exceeded the H/Pt ratio of unity for adsorption at and above 423 K, indicating that hydrogen adsorption involves hydrogen atom spillover and surface diffusion of the spiltover hydrogen atom over the bulk surface of MoO₃ followed by formation of H_xMoO₃. The hydrogen uptake was scarcely appreciable for Pt-free MoO₃. The rate controlling step of the hydrogen adsorption on Pt/MoO₃ was the surface diffusion of the spiltover hydrogen with the activation energy of 83.1 kJ/mol. The isosteric heats of hydrogen adsorption on Pt/MoO₃ were 18.1–16.9 kJ/mol for the hydrogen uptake range 2.4–2.8 × 10¹⁹ H-atom/g-cat. Similarities and differences in hydrogen adsorption on Pt/SO₄^2?–ZrO₂, Pt/WO₃–ZrO₂ and Pt/MoO₃ catalysts are discussed.     

Artificial life based on the programmed self-decomposition model, SIVA

To examine the effect and significance of the phenomenon of death, we have developed an artificial life simulator, SIVA-III (simulator for individuals of virtual automata III), based on a “programmed self-decomposition model”. The architecture of this simulator consists of a “finite heterogeneous habitation environment” and “artificial life with programmed individual death and concurrent self-decomposition”. We conducted experiments under various settings to comparare and contrast mortal life and immortal life. The results clearly demonstrated the validity of a self-decomposing, programmed individual death, and the limitations inherent in immortal life, suggesting a striking superiority of mortal life over immortal life. This work was presented in part at the Fifth International Symposium on Artificial Life and Robotics, Oita, Japan, January 26–28, 2000     

On the thermal field of a wall plume (The response to artificial disturbances)

Experimental investigations were carried out on the characteristics of the thermal field of a wall plume ascending from a horizontal line heat source embedded on the low part of a vertical wall surface. For the stability analysis of the present wall plume field, a vibrating copper wire was set horizontally near the line heat source in the field and the wall plume field was disturbed by the vibrating wire. Some two-dimensional sinusoidal thermal disturbances were introduced into the wall plume field and the growth or diminution of the amplitude of temperature fluctuations by the artificial disturbance were measured in the wall plume field with a thermal probe. The response characteristics of the wall plume field to the disturbance frequency were also examined. As a result, it was ascertained that the frequency response of a wall plume field could be predicted by linear stability analysis. © 1999 Scripta Technica, Heat Trans Asian Res, 28(7): 559–572, 1999     

Sex Pheromones of Two Melittini Species, <Emphasis Type="Italic">Macroscelesia Japona</Emphasis> and <Emphasis Type="Italic">M. Longipes</Emphasis>: Identification and Field Attraction

Two Melittini species, Macroscelesia japona and M. longipes (Lepidoptera: Sesiidae), are native to Japan, but occupy different localities as their host plants seldom grow together. The contents of the sex pheromone gland of adult females of both species, obtained after rearing larvae collected from the field, were investigated by gas chromatograph-electroantennogram detection (GC-EAD) and gas chromatograph-mass spectrometry (GC-MS) analyses. Two GC-EAD-active components were found in a crude extract of M. japona female pheromone gland, and identified as (2E,13Z)-2,13-octadecadien-1-ol (E2,Z13-18:OH) and (2E,13Z)-2,13-octadecadienal (E2,Z13-18:Ald). The average ratio of these two components was about 1:10. In the field, M. japona males were attracted to traps baited with E2,Z13-18:Ald alone, but the strongest attraction was observed with a 1:100 mixture of E2,Z13-18:OH and E2,Z13-18:Ald. The same two components were found in extracts of M. longipes females, but in a markedly different ratio. Male M. longipes were attracted most strongly to lures containing a 20:1 mixture of E2,Z13-18:OH and E2,Z13-18:Ald, although some males were also attracted to lures with E2,Z13-18:OH alone. Although the two species do not generally occur in sympatry, our data indicate that, in the event of overlap, cross attraction of the two species is unlikely.