Biosorption of heavy metals onto nonliving Laminaria japonica

In this paper, study of the biosorption of Cd(2+) and Pb(2+) by nonliving Laminaria japonica in a batch adsorption system is described. The content of acidic sites and the dissociation constant of carboxylic acid functional groups (metal-binding site) of L. japonica were experimentally determined by conductometric and potentiometric titrations and theoretically predicated by using monodentate and bidentate binding models. The models are based on the monodentate or bidentate binding reactions of bivalent metal ions to acidic sites. The acidic site content and carboxylic acid dissociation constants determined are 1.25 and 0.18 mmol L(-1), respectively. The results showed that the bidentate adsorption model fits well the biosorption of bivalent metal ions onto L. japonica with the bidentate binding constants for Cd(2+) and Pb(2+) being 5.72 × 10(3) and 6.24 × 10(4) L mol(-1), respectively. The adsorption process of L. japonica followed the pseudo-second-order kinetics.     

Performance of ZrC-Coated Particle Fuel in Irradiation and Postirradiation Heating Tests

The ZrC-coated UO₂ particle is a promising fuel for high-temperature gas-cooled reactors. Particle fuels with multiple layers of pyrolytic carbon and ZrC have been irratiation-tested to a maximum fast-neutron fluence exceeding 2 × 10²⁵/m² ( E < 29 fJ). In-reactor fission-gas release measured at a burnup of 1.5 at.% was minimal. The failure fraction by postirradiation examination was null for all samples. The ZrC-coated particles at 4 at.% burnup were postirradiation heated to 2400°C/min without failure until after 6000 s at the maximum temperature. It was found that the ZrC layer could sustain a large strain at such high temperatures. The behavior is in strong contrast with that of SiC of standard Triso coating, which is brittle to very high temperatures.     

Degradation behavior of narrow-spectral-linewidth DFB lasers forsuper-wide-band FM conversion

The feasibility of using narrow-spectral-linewidth distributed-feedback lasers as subcarrier multiplexing video distribution sources in optical heterodyne FM converters is shown by investigating degradation modes of the lasers. There is no change in the dynamic properties, such as the FM response and the composite second-order and composite triple-beat figures, though spectral linewidth is increased by degradation. The main degradation appears as an increase in spectral linewidth due to 1/f noise caused by buried heterointerface degradation. The FM response, composite second-order, and composite triple-beat, however, hardly change in the degradation process     

Deposition of atmospheric (137)Cs in Japan associated with the Asian dust event of March 2002

Considerable deposition of (137)Cs was observed in the northwestern coastal area of Japan in March 2002. Since there were no nuclear explosions or serious nuclear accidents in the early 2000s, transport of previously contaminated dust appears to be the only plausible explanation for this event. In March 2002, there was a massive sandstorm on the East Asian continent, and the dust raised by the storm was transported across the sea to Japan. This dust originated in Mongolia and northeastern China, in an area distant from the Chinese nuclear test site at Lop Nor or any other known possible sources of (137)Cs. Our radioactivity measurements showed (137)Cs enrichment in the surface layer of grassland soils in the area of the sandstorm, which we attributed to accumulation as a result of past nuclear testing. We suggest that the grassland is a potential source of (137)Cs-bearing soil particles. Since the late 1990s, this area has experienced drought conditions, resulting in a considerable reduction of vegetation cover. We attribute the prodigious release of (137)Cs-bearing soil particles into the atmosphere during the sandstorm and the subsequent deposition of (137)Cs in Japan to this change.     

A three‐phase constant‐current source using an immittance converter

The term immittance converter refers to an impedance–admittance converter. The immittance converter has an input impedance that is proportional to the admittance of the load connected across output terminals. In this converter, the output current is proportional to the input voltage and the input current is proportional to the output voltage. Consequently, it converts a constant‐voltage source into a constant‐current source and a constant‐current source into a constant‐voltage source. It is well known that the quarter wavelength transmission line shows immittance conversion characteristics. However, it has a very long line length for the switching frequency, and is not suitable for power electronics applications. We thus proposed immittance converters that consist of lumped elements L, C and show improved immittance conversion characteristics at a resonant frequency. A three‐phase constant‐current source is proposed in this paper. It is possible to realize this by a simple circuit using an immittance converter. In this paper, circuit operation, characteristic equations, and results of simulation are described. © 2005 Wiley Periodicals, Inc. Electr Eng Jpn, 151(4): 47–54, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20078     

Reexamination of the Female Sex Pheromone of the Sweet Potato Vine Borer Moth: Identification and Field Evaluation of a Tricosatriene

The sweet potato vine borer moth, Omphisa anastomosalis (Pyraloidea: Crambidae), is a serious pest in tropical and subtropical Asia-Pacific regions. In previous work using a population from Okinawa, Japan, (10E,14E)-10,14-hexadecadienal (E10,E14-16:Ald) was identified as the major pheromone component, with hexadecanal, (E)-10-hexadecenal, and (E)-14-hexadecenal as minor components. However, traps baited with the synthetic compounds were less effective at attracting males in the field than those baited with virgin females. While Pyraloidea females usually produce only Type I pheromone components (unsaturated fatty alcohols and their derivatives), the pheromones of some Pyraloidea species have been shown to involve a combination of both Type I and Type II components (unsaturated hydrocarbons and their epoxides). We examined an extract of the pheromone glands of female O. anastomosalis from Vietnam by gas chromatography coupled to mass spectrometry and detected (3Z,6Z,9Z)-3,6,9-tricosatriene (Z3,Z6,Z9-23:H) in addition to the compounds identified previously. All four isomers of 10,14–16:Ald were synthesized. A mixture of synthetic E10,E14-16:Ald and Z3,Z6,Z9-23:H in a ratio of 1:0.2–1:2 was attractive to male moths in Vietnam, indicating the strong synergistic effect of the Type II compound. Addition of the other minor pheromone components to the binary blend did not increase the number of male moths captured. Combinations of Z3,Z6,Z9-23:H with the other three geometrical isomers of E10,E14-16:Ald attracted no males, further substantiating the 10E,14E configuration of the natural diene component. E10,E14-16:Ald mixed with other polyunsaturated hydrocarbons showed that mixtures that included a C₂₁ triene, a C₂₂ triene, or a C₂₃ pentaene attracted as many males as did the mixture with Z3,Z6,Z9-23:H. The identification of a highly attractive sex pheromone will help in developing efficient strategies for monitoring and control of O. anastomosalis populations in sweet potato fields.     

Preferential adsorption of bovine fibrinogen dimer onto polymer microspheres having heterogeneous surfaces consisting of hydrophobic and hydrophilic parts

The adsorption onto polymer microspheres of bovine fibrinogen (BFb) containing both dimeric and monomeric species was examined using various homopolymer, copolymer, and poly(2-hydroxyethyl methacrylate)/polystyrene composite microspheres which were produced by the emulsifier-free (seeded) emulsion polymerization technique. The preferential adsorption of the BFb dimer was clearly observed in an optimum region of the surface hydrophilicities of the polymer microspheres. The preferential adsorption of the BFb dimer onto the composite polymer microspheres having heterogeneous surfaces with both hydrophilic and hydrophobic parts was more remarkable than that onto the homopolymer and copolymer microspheres having homogeneous surfaces. The behavior is discussed in comparison with those for bovine serum albumin and human γ-globulin.     

Reliability of 1300-nm spot-size converter integrated laser diodesfor low-cost optical modules in access networks

This paper discusses the degradation behaviors and reliability of spot-size converter integrated laser diodes fabricated using the full wafer process with dry etching and metal organic vapor phase epitaxy (MOVPE). Failure criteria applicable to actual access networks were determined based on the degradation behavior exhibited in several aging tests, and device lifetimes were then estimated. The far-field patterns and wide-temperature operation required for low-cost system application scarcely changed during degradation, even after a 150% increase in threshold current. Within this degradation range, the device life for system application is estimated to be more than 10⁵ h at 60°C and 10 mW     

Production of gamma-lactones by the brown-rot basidiomycete Piptoporus soloniensis

A wild strain of brown-rot basidiomycete Piptoporus soloniensis produced a sweet flavor similar to tropical fruits in liquid cultures. The major and minor compounds were identified to be gamma-decalactone and gamma-octanolactone by gas chromatography-mass spectrometry analysis, respectively. The growth and production of gamma-decalactone by P. soloniensis in broth to which fatty acids had been added were investigated. The addition of 12-hydroxystearic acid and ricinoleic acid to the culture markedly enhanced the production of gamma-decalactone. On the other hand, addition of myristic acid, palmitic acid, stearic acid and oleic acid to the culture resulted in a higher production of gamma-octanolactone. The addition of hexanoic acid, octanoic acid, decanoic acid, lauric acid, linoleic acid and linolenic acid to the culture reduced the growth of P. soloniensis and production of gamma-decalactone and gamma-octanolactone. This strain accumulated oxalic acid in liquid culture and grew sufficiently under strongly acidic conditions.     

Identification of Conjugated Pentadecadienals as Sex Pheromone Components of the Sphingid Moth, Dolbina tancrei

Homologs of bombykal, (10E,12Z)-10,12-hexadecadienal, have been reported to be sex pheromones or sexual attractants of several species of sphingid moths. In this study, we identified novel bombykal analogs as sex pheromone components from a Japanese sphingid moth, Dolbina tancrei. Staudinger (Sphingidae: Lepidoptera). Sex pheromone gland extracts from calling female moths were subjected to gas chromatography/electroantennograhic detection (GC/EAD), gas chromatography/mass spectrometry (GC/MS), and gas chromatography (GC) analyses. GC/EAD analyses showed two active components in the crude pheromone extracts. GC/MS analysis determined these two components to be pentadecadienals. GC/MS of their MTAD derivatives showed conjugated double bonds at the 9- and 11-positions, indicating 9,11-pentadecadienals. The isomeric configurations of these candidates were determined by comparison of their Kováts retention indices with those of synthetic compounds. Field bioassays with the four isomers of 9,11-pentadecadienal and their mixtures confirmed that the two sex pheromone components of D. tancrei are (9E,11Z)-9,11-pentadecadienal and (9Z,11Z)-9,11-pentadecadienal, with the highest male catches observed for a 90:10 blend. This is the first report of 9,11-pentadecadienals as sex pheromone components in lepidopteran species.