A coaxial pulsed plasma thruster using chemical propellants

Pulsed plasma thrusters (PPTs) have the advantages of mechanical simplicity and robustness compared to other electric propulsion systems. However the thrust power ratio of PPTs is lower than that of other electric propulsion systems. To enhance the thrust performance of the PPT, we propose to use several combustible solid chemicals as coaxial PPT propellants to replace Teflon^® (Polytetrafluoroethylene: PTFE). With the design, the force obtained thermodynamically is expected to augment the PPT thrust power ratio with the help of the chemical energy contained in the propellants. As a result, the thrust power ratio is increased using hydroxyl-terminated polybutadiene-ammonium perchlorate (HTPB-AP)-based propellants compared to the case of ordinary Teflon. The discharge current and voltage waveform does not change even when the propellant is changed. These findings could indicate that the impulse bits by gasdynamic contribution are lager in the case of chemical solid propellants than in the case of Teflon.     

The evaluation of the emotion by near-infrared spectroscopy

Our purpose is to develop the technology for evaluating emotion objectively from the oxygenated hemoglobin within a brain. Nowadays, Japan is an aging society. The elderly people who need care will increase from now on increasingly. In the case of the person requiring the care who lost the function to convey an intention especially, the objective judgment to a physical and mental pain is required. Persons requiring care will also increase in number with the increase in this population. We gave subject stimulus of a comfortable or an uncomfortable sound and measured concentration of the oxygenated hemoglobin of a frontal lobe part by near-infrared spectroscopy. Based on the experimental result, a comfortable state or an uncomfortable state was distinguished by concentration of the oxygenated hemoglobin using the bayesian network. As a result, we were able to estimate the subject’s psychological condition.     

The effect of initial parameters on particle size distribution inverted using the laser diffraction technique and a non-linear iterative method

The Twomey non-linear iteration (NLI) method is known by the simple algorithm. However, the performance of the inversion is strongly depended on parameters of the NLI algorithm. Major parameters in the algorithm are the initial size distribution, weight parameter, and the number of iteration. In the study, we show how values of initial parameters affect to the result of size distribution in the algorithm by the laser diffraction scattering method. Computer simulations and experimental method are carried out to observe the influence of the parameters in the algorithm. Scattering pattern is calculated by Mie scattering model in the range of 5.0 × 10^?4 ? 2.5 rad. Experimental results were measured mono-distribution polystyrene latex (50 μm) and poly-distribution glass beads (3–30 μm, and 10–100 μm). The number of iteration is a most influence parameter in the NLI algorithm. If the number of iteration is too high for calculation, calculated result will lose the smoothness. We also introduced a new parameter C (combination of the sum of residual squares of scattering signals and sum of secondary differentiation of size distribution) to monitor the suitable stop criterion for the NLI method. The parameter C is a useful index for the poly dispersion sample to find the suitable stop criterion.     

Long terminal linear alkyl group as internal crystallization accelerating moiety of poly(l-lactide)

Poly(l-lactide) (PLLA) polymers having terminal n-alkyl groups with a wide variety of lengths (C₀–C₂₂) were synthesized by ring-opening polymerization of l-lactide in the presence of coinitiators of l-lactic acid (C₀), 1-hexanol (C₆), 1-dodecanol (C₁₂), and 1-docosanol (C₂₂) and their segmental mobility and non-isothermal and isothermal crystallization behavior were investigated by differential scanning calorimetry (DSC) and wide-angle X-ray diffractometry (WAXD). Glass transition and cold crystallization temperatures of melt-quenched samples during heating decreased with an increase in the length of terminal n-alkyl groups. The enhanced PLLA segmental mobility and hydrophobic interaction-based accelerated PLLA nucleation by the presence of terminal long n-alkyl groups should have caused the accelerated non-isothermal and isothermal crystallization of PLLA segments traced by cold crystallization temperature during heating and by radial growth rate of spherulites, respectively. The crystallization accelerating effect became higher with the length of terminal n-alkyl groups. The effects of the length of terminal n-alkyl group on the crystalline growth mechanism of PLLA at the lowest crystallizable temperature was insignificant, whereas the effects of the length of terminal n-alkyl group on the nucleation mechanism of PLLA chains were significant and insignificant for PLLA having M_n of 6–7 × 10³ of 2 × 10⁴ g mol⁻¹, respectively. WAXD measurements revealed that the transition crystallization temperature at which crystalline modification changes from δ-form to α-form was affected by the length of terminal n-alkyl group for PLLA having M_n of 6–7 × 10³ g mol⁻¹, but was not altered by the length of terminal n-alkyl group for PLLA having M_n of 2 × 10⁴ g mol⁻¹.     

Comparison of separation performance between single and two inlets hydrocyclones

Experimental studies have been carried out about the particle separation performance of single and two inlets hydrocyclones. Two types of hydrocyclones having the same total inlet holes area were examined. Hydrocyclone A (with single inlet hole) and hydrocyclone B (with two inlet holes) were used. An aqueous slurry of silica particles (0.5 wt% with a median diameter of about 2.1 μm) was tested using a 20 mm-diameter hydrocyclone with a 15% underflow ratio. It was found that the optimum flow rate which gives the highest separation performance of the hydrocyclone B is the same flow rate for each inlet. Usage of the hydrocyclone B indicated smaller cut size and higher particle collection efficiency compared to that of the hydrocyclone A, under the same flow rate or same pressure drop conditions. The time of flight model was used to predict the 50% cut size diameter for single inlet hydrocyclone, and the model was modified to the two inlets hydrocyclone. It was found that the calculated results agree well with the experimental results for the hydrocyclone A, and for the hydrocyclone B under the low total flow rates conditions.     

Photocatalytic hydrogenation of acetophenone derivatives and diaryl ketones on polycrystalline titanium dioxide

In the absence of molecular oxygen, various aromatic ketones such as acetophenone derivatives and diaryl ketones were photocatalytically hydrogenated on polycrystalline titanium dioxide (Degussa P25) under UV light irradiation (> 340 nm). The desired secondary alcohols were obtained with excellent chemical efficiency (almost 100% yields for 10 examples) by choosing ethanol as a sacrificial hole scavenger, which was oxidized into acetaldehyde.     

Hydrolytic degradation of poly(L-lactic acid): Combined effects of UV treatment and crystallization

Amorphous and crystallized poly(L -lactic acid) (PLLA) films were prepared and the hydrolytic degradation of the ultraviolet (UV)-treated and UV-nontreated films was investigated. This study reveals that the combination of UV and thermal treatments can produce the PLLA materials having different hydrolytic degradation profiles and that the UV-irradiation in the environment will affect the design of recycling process for PLLA articles. In an early stage, the degrees of hydrolytic degradation monitored by weight loss (W_loss), number-average molecular weight (M _n), and melting temperature (T _m) were higher for the UV-treated films than for the UV-nontreated films. In a late stage, the trend traced by W_loss was reversed, and the difference in the degrees of hydrolytic degradation between the UV-treated and UV-nontreated films monitored by M _n and T _m became smaller, with the exception of the degrees of hydrolytic degradation of the amorphous films traced by T _m. Also, in the early stage, the degrees of hydrolytic degradation monitored by W_loss and M _n were higher for the crystallized films than for the amorphous films. In the late stage, this trend was reversed, with the exception of the degrees of hydrolytic degradation of the UV-treated films monitored by M _n. The main factors that determined the W_loss and T _m were the molecular weight and initial crystallinty but not the molecular structures such as terminal CC double bonds and crosslinks. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Group behavior of agents with an emotional model

Recently, there has been much interest in the study of the formation of groups of agents that cause interactions between agents and invent new functions. We gave some agents an action rule based on the interactions of human feelings by using a circumplex model. It had been decided that the parameters of feelings in this model should have only two axes. In this report, eight basic action dimensions and pure feelings on four corresponding axes were given to agents as a model of feelings and actions based on the multiple factor analysis theory of R. Plutchik, and the behavioral characteristics of the group of agents were examined.